Bamboo-inspired metamaterials design: Microstructure dielectrophoretic orientation for enhancing insulation performance of advanced power modules
Source abstract
Abstract
The application of nonlinear conductivity coatings in high-voltage power module is a promising strategy for significantly improving electrical insulation performance. The core of the improvement principle is that the nonlinear conductivity realizes a dynamic optimization of the discharge risk inside the material. The realization of this nonlinear conductivity requires sufficient microscopic arrangement of fillers that align with the macroscopic insulation structure. However, conventional methods fail at precise arrangement control so that typically require high filler concentration, which markedly increases dielectric loss and leakage current. Drawing inspiration from the bamboo structure, metamaterials offer an efficient tuning of nonlinear characteristics with lower filler concentrations through thoughtful design. In this context, we introduce a novel approach to fabricate SiC whisker / silicon elastomer metamaterial coatings leveraging the dielectrophoretic effect. Comprehensive testing of the physical and chemical properties of the composites confirmed the successful preparation of the material. And the metamaterial exhibits excellent nonlinear conductivity and low dielectric loss across various temperatures. Notably, after applying the metamaterial coating, the maximum electric field stress within the power module was reduced by nearly ten times, and the partial discharge inception voltage (PDIV) increased by 58.9 %, 74.7 %, and 32.8 % at 30 °C, 60 °C, and 90 °C, respectively. From solid physical mechanism to exquisite material design and practical device-level implementation, this study offers valuable insights into enhancing the insulation performance of power module and demonstrates substantial potential for further industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Failure mechanisms of the bonded interface between mold epoxy and metal substrate exposed to high temperature10.1016/j.compositesb.2023.110562 ↗
2. Development of Ag@ Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: experiment validation and numerical simulation10.1016/j.compositesb.2024.111519 ↗
3. Electrical trees in silicone gel influenced by different frequency and pulse width under unipolar high frequency square wave voltage10.1109/TDEI.2024.3364117 ↗
4. Two-stage electric field optimization method for high-voltage power module using dielectrically graded insulation micro-region10.1109/TDEI.2023.3239035 ↗
5. Self-adaptive field-grading coating for partial discharge mitigation of high voltage power module under high dv/dt square wave voltage
6. Electric-field-induced assists fabrication of micro-SiC/Epoxy coating with low additive amount to improve surface insulating performance of HVDC insulator10.1016/j.compscitech.2024.110696 ↗
7. Packaging of a 10-kV double-side cooled silicon carbide diode module with thin substrates coated by a nonlinear resistive polymer-nanoparticle composite10.1109/TPEL.2022.3190303 ↗
8. Gradient structure design of zinc oxide varistor microsphere composites for efficient electric field grading10.1016/j.compositesa.2021.106731 ↗
9. Fabrication, properties and applications of polymer composites additively manufactured with filler alignment control: a review10.1016/j.compositesb.2023.110661 ↗
10. Fiber alignment and mode-mixity effects on fracture behavior of CNF/epoxy nanocomposite adhesive joints10.1016/j.compositesb.2022.110341 ↗
11. Tunable nonlinear conductive behavior without percolation threshold and high thermal conductivity of epoxy resin/SiC ceramic foam co-continuous phase composites10.1016/j.compscitech.2023.109984 ↗
12. Design of bioinspired highly aligned bamboo-mimetic metamaterials with structural and functional anisotropy10.1109/TDEI.2023.3264964 ↗
13. A strong, tough, and scalable structural material from fast-growing bamboo10.1002/adma.201906308 ↗
14. Enhancing mechanical and thermal properties of epoxy nanocomposites via alignment of magnetized SiC whiskers10.1021/acsami.7b04546 ↗
15. Significantly enhanced dielectric performances and high thermal conductivity in poly (vinylidene fluoride)-based composites enabled by SiC@ SiO2 core–shell whiskers alignment10.1021/acsami.7b14751 ↗
16. In situ electric field driven assembly to construct adaptive graded permittivity BaTiO3/epoxy resin composites for improved insulation performance
17. Evaluating the optimum nanofiber alignment in conductive composites with a stereology-based anisotropic degree10.1016/j.compositesa.2023.107485 ↗
18. Dielectrophoretic modeling of the dynamic carbon nanotube network formation in viscous media under alternating current electric fields10.1016/j.carbon.2013.12.035 ↗
19. Tuning dielectric/mechanical performance of polymeric composites for flexible electronics based on electric field-driven configurational entropy change: high throughput simulation and application10.1016/j.coco.2023.101513 ↗
20. Review of the difference between the press pack IGBT using for converter valve and for DC breaker
21. Electric-field-dominated partial discharge in medium voltage SiC power module packaging: model, mechanism, reshaping, and assessment10.1109/TPEL.2021.3132695 ↗
22. Layered nanocomposites by shear-flow-induced alignment of nanosheets10.1038/s41586-020-2161-8 ↗
23. Design of 3D printed bioinspired nacre-like structured materials with significantly enhanced thermal conductivity10.1063/5.0042812 ↗
24. Study on nonlinear conductivity of copper-titanate-calcium/liquid silicone rubber composites10.1109/TDEI.2018.007483 ↗
25. Grading of electric field distribution of AC polymeric outdoor insulators using field grading material10.1109/TDEI.2019.007989 ↗
26. Review of nonlinear conductivity theory research of modified composite materials10.1109/ACCESS.2019.2906662 ↗
27. Enhanced field-dependent conductivity and material properties of nano-AlN/micro-SiC/silicone elastomer hybrid composites for electric stress mitigation in high-voltage power modules10.1088/1361-6528/ac8aa0 ↗
28. Simulation of the electric field strength in the vicinity of metallization edges on dielectric substrates10.1109/TDEI.2014.004285 ↗
29. Mechanism study of the conductivity characteristics of cellulose electrical insulation influenced by moisture10.1063/5.0121978 ↗