Dual-functional coatings on magnesium alloys: Enhancing corrosion behavior under stress and osteogenic effect in osteoporotic rats
Source abstract
Abstract
Magnesium-based implants are subjected to complicated stresses during implantation in the human body. In this case, they undergo stress-induced corrosion and usually lead to early breakage or disintegration of implants. Calcium phosphate compounds have been used as coatings, bone cement and drug carrier in orthopedic application. Their success has been expanded to Mg alloys. Calcium phosphate-based coatings succeeded in corrosion control and osteointegration of Mg alloys in a big extent. However, their protective effect under stress condition is questionable considering the brittle nature. With the assistance of high pH microenvironment near Mg alloy surface, calcium phosphate coatings have the self-repair potential via the dissolution-precipitation mechanism. Inspired by this phenomenon, strontium doped hydroxyapatite (Sr-HA) coatings with higher solubility have been prepared on the surface of Mg alloys. Sr-HA coatings served as not only a physical barrier effect to postpone pitting formation, but also provide ion supplement to seal the cracks initiated during tensile deformation. The results obtained in slow strain rate tensile test (SSRT) demonstrated improved corrosion and mechanical behaviors of Sr-HA coated Mg alloys. Specifically, the elongation of Sr-HA coated alloy increased by 56.7 and 35.2% as compared to the bare and HA coated one in DMEM. In ovariectomized rats, the implants exhibited only 2.7–5.6% reduction of implant volume after 12 weeks implantation. Sr-HA coating further increased early new bone formation than HA coated implants. 12 weeks post-implantation, a large amount of bony tissue with higher trabecular thickness and hardness was formed adjacent to the Sr-HA coated implants. This study demonstrated the efficiency of a rapid dissolved Sr-HA coating on the corrosion behavior of Mg alloys under mechanical loading and the osteogenesis in ovariectomized rats. It therefore holds a promising practical significance for the future coating design strategy for Mg alloys when trying to expand their application range to locations with higher loading conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Fundamental theory of biodegradable metals—definition, criteria, and design10.1002/adfm.201805402 ↗
2. High-purity weight-bearing magnesium screw: translational application in the healing of femoral neck fracture10.1016/j.biomaterials.2020.119829 ↗
3. Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats10.1038/nm.4162 ↗
4. Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects10.1016/j.biomaterials.2021.121301 ↗
5. Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy10.1073/pnas.1518238113 ↗
6. Early results using a biodegradable magnesium screw for modified chevron osteotomies10.1002/jor.23241 ↗
7. Bioabsorbable metal screws in traumatology: a promising innovation10.1016/j.tcr.2017.01.012 ↗
8. Internal fixation of three-dimensional distal metatarsal I osteotomies in the treatment of hallux valgus deformities using biodegradable magnesium screws in comparison to titanium screws10.1016/j.fas.2018.02.005 ↗
9. The effect of tensile and fluid shear stress on the in vitro degradation of magnesium alloy for stent applications
10. Effect of strain on degradation behaviors of WE43, Fe and Zn wires10.1016/j.actbio.2020.06.028 ↗
11. Effect of stress on corrosion of high-purity magnesium in vitro and in vivo10.1016/j.actbio.2018.11.019 ↗
12. A critical review of the stress corrosion cracking (SCC) of magnesium alloys10.1002/adem.200500071 ↗
13. Effect of plasma electrolytic oxidation coating on the stress corrosion cracking behaviour of wrought AZ61 magnesium alloy10.1016/j.corsci.2008.05.018 ↗
14. In-vitro biodegradation and corrosion-assisted cracking of a coated magnesium alloy in modified-simulated body fluid10.1016/j.msec.2017.04.079 ↗
15. Stress corrosion cracking of an extruded magnesium alloy (ZK21) in a simulated body fluid10.1016/j.engfracmech.2018.09.002 ↗
16. Control of magnesium alloy corrosion by bioactive calcium phosphate coating: implications for resorbable orthopaedic implants10.1016/j.mtla.2019.100291 ↗
17. Hydroxyapatite coatings on Mg-Ca alloy prepared by pulsed laser deposition: properties and corrosion resistance in simulated body fluid10.1016/j.ceramint.2018.06.095 ↗
18. Corrosion resistance and antibacterial properties of hydroxyapatite coating induced by gentamicin-loaded polymeric multilayers on magnesium alloys10.1016/j.colsurfb.2019.04.029 ↗
19. Self-healing behavior of sodium polyacrylate-hydroxyapatite coatings on biodegradable magnesium alloy10.5006/2509 ↗
20. Self-healing property of hydroxyapatite and octacalcium phosphate coatings on pure magnesium and magnesium alloy10.1016/j.corsci.2015.08.001 ↗
21. Insights into self-healing behavior and mechanism of dicalcium phosphate dihydrate coating on biomedical Mg
22. Strontium calcium phosphate nanotubes as bioinspired building blocks for bone regeneration10.1021/acsami.0c12434 ↗
23. Strontium doped hydroxyapatite from Mercenaria clam shells: synthesis, mechanical and bioactivity study10.1016/j.jmbbm.2018.10.027 ↗
24. Fabrication of strontium-substituted hydroxyapatite scaffolds using 3D printing for enhanced bone regeneration10.1007/s10853-020-05391-y ↗
25. Degradation and biocompatibility of a series of strontium substituted hydroxyapatite coatings on magnesium alloys10.1039/C9RA02210D ↗
26. Inorganic biomaterials for regenerative medicine10.1021/acsami.9b17801 ↗
27. Flow-induced corrosion of absorbable magnesium alloy: in-situ and real-time electrochemical study10.1016/j.corsci.2015.12.020 ↗
28. 2012
29. Corrosion fatigue behaviors of two biomedical Mg alloys – AZ91D and WE43 – in simulated body fluid10.1016/j.actbio.2010.07.026 ↗
30. Stress corrosion cracking of several hot-rolled binary Mg–X alloys10.1016/j.corsci.2015.04.023 ↗
31. Comparative study of two types of herbal capsules with different Epimedium species for the prevention of ovariectomised-induced osteoporosis in rats
32. Up-regulated CST5 inhibits bone resorption and activation of osteoclasts in rat models of osteoporosis via suppression of the NF-κB pathway10.1111/jcmm.14552 ↗
33. Enhanced osteointegration of orthopaedic implant gradient coating composed of bioactive glass and nanohydroxyapatite10.1007/s10856-010-4077-6 ↗
34. In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal10.1016/j.actbio.2012.02.018 ↗
35. Titanium alloy osseointegration in cancellous and cortical bone of ovariectomized animals: histomorphometric and bone hardness measurements
36. Promotion of bone repair by implantation of cryopreserved bone marrow–derived mononuclear cells in a rabbit model of steroid-associated osteonecrosis10.1002/art.34525 ↗
37. Electrochemical deposition of Sr and Sr/Mg-co-substituted hydroxyapatite on Ti-40Nb alloy10.1016/j.matlet.2019.03.141 ↗
38. The in vitro and in vivo performance of a strontium-containing coating on the low-modulus Ti35Nb2Ta3Zr alloy formed by micro-arc oxidation10.1007/s10856-015-5533-0 ↗
39. Titania nanotube interface to increase adhesion strength of hydroxyapatite sol-gel coatings on Ti-6Al-4V for orthopedic applications10.1016/j.surfcoat.2019.04.071 ↗
40. Synthesis, characterization, corrosion and bioactivity investigation of nano-HA coating deposited on biodegradable Mg-Zn-Mn alloy10.1016/j.surfcoat.2018.04.035 ↗
41. Bio-corrosion behavior of ceramic coatings containing hydroxyapatite on Mg-Zn-Ca magnesium alloy10.3390/app8040569 ↗
42. Fatigue property of a bioabsorbable magnesium alloy with a hydroxyapatite coating formed by a chemical solution deposition10.1016/j.jmbbm.2013.04.021 ↗
43. Stress corrosion cracking of rare-earth containing magnesium alloys ZE41, QE22 and Elektron 21 (EV31A) compared with AZ8010.1016/j.msea.2007.07.070 ↗
44. Stress corrosion cracking behavior of LSP/MAO treated magnesium alloy during SSRT in a simulated body fluid10.1016/j.jallcom.2020.153707 ↗
45. Elucidating the role of microstructural modification on stress corrosion cracking of biodegradable Mg4Zn alloy in simulated body fluid10.1016/j.msec.2019.110164 ↗
46. Influence of phase dissolution and hydrogen absorption on the stress corrosion cracking behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy in 3.5wt% NaCl solution10.1016/j.corsci.2018.07.019 ↗
47. Effect of duty cycle on preparation and corrosion behavior of electrodeposited calcium phosphate coatings on AZ9110.1016/j.apsusc.2017.07.111 ↗
48. Effect of pH value and preparation temperature on the formation of magnesium phosphate conversion coatings on AZ31 magnesium alloy10.1016/j.apsusc.2019.05.309 ↗
49. Wire arc additive manufacturing of AZ31 magnesium alloy: grain refinement by adjusting pulse frequency10.3390/ma9100823 ↗
50. Initial formation of corrosion products on pure zinc in simulated body fluid10.1016/j.jmst.2018.05.005 ↗
51. Effects of strain on the corrosion behaviour of X80 steel10.1016/j.corsci.2011.05.011 ↗
52. A novel observation of the interaction between the macroelastic stress and electrochemical corrosion of low carbon steel in 3.5wt% NaCl solution10.1016/j.electacta.2012.08.079 ↗
53. Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials10.1016/j.actbio.2015.04.011 ↗
54. Intervention timing of strontium treatment on estrogen depletion-induced osteoporosis in rats: bone microstructure and mechanics10.1002/jor.22517 ↗
55. Corrosion fatigue fracture of magnesium alloys in bioimplant applications: a review10.1016/j.engfracmech.2014.08.009 ↗
56. Improving stress corrosion cracking behavior of AZ31 alloy with conformal thin titania and zirconia coatings for biomedical applications10.1016/j.jmbbm.2020.104005 ↗
57. Hydroxyapatite coating containing multi-walled carbon nanotubes on AZ31 magnesium: mechanical-electrochemical degradation in a physiological environment10.1016/j.ceramint.2018.02.015 ↗
58. In-vitro biodegradation and corrosion-assisted cracking of a coated magnesium alloy in modified-simulated body fluid10.1016/j.msec.2017.04.079 ↗
59. A layer-by-layer assembled coating for improved stress corrosion cracking on biomedical magnesium alloy in cell culture medium
60. Influence of a MAO+PLGA coating on biocorrosion and stress corrosion cracking behavior of a magnesium alloy in a physiological environment10.1016/j.corsci.2018.12.005 ↗
61. Effects of strontium in modified biomaterials10.1016/j.actbio.2010.08.031 ↗
62. Effects of strontium and zinc substituted plasma sprayed hydroxyapatite coating on bone-like apatite layer formation and cell-material interaction10.1016/j.matchemphys.2021.125219 ↗
63. A functionalized TiO2/Mg2TiO4 nano-layer on biodegradable magnesium implant enables superior bone-implant integration and bacterial disinfection10.1016/j.biomaterials.2019.119372 ↗
64. A surface-engineered multifunctional TiO2 based nano-layer simultaneously elevates the corrosion resistance, osteoconductivity and antimicrobial property of a magnesium alloy10.1016/j.actbio.2019.09.008 ↗
65. Degradation and osteogenic induction of a SrHPO4-coated Mg–Nd–Zn–Zr alloy intramedullary nail in a rat femoral shaft fracture model10.1016/j.biomaterials.2020.119962 ↗
66. Magnesium implantation or supplementation ameliorates bone disorder in CFTR-mutant mice through an ATF4-dependent Wnt/β-catenin signaling
67. Strontium-doped bioactive glass nanoparticles in osteogenic commitment10.1021/acsami.8b06154 ↗
68. Dual actions of osteoclastic-inhibition and osteogenic-stimulation through strontium-releasing bioactive nanoscale cement imply biomaterial-enabled osteoporosis therapy10.1016/j.biomaterials.2021.121025 ↗
69. Strontium combined with bioceramics for osteoporotic bone repair: oral intake or as a dopant?
70. High proportion strontium-doped micro-arc oxidation coatings enhance early osseointegration of titanium in osteoporosis by anti-oxidative stress pathway
71. Strontium calcium phosphate nanotubes as bioinspired building blocks for bone regeneration10.1021/acsami.0c12434 ↗
72. From estrogen-centric to aging and oxidative stress: a revised perspective of the pathogenesis of osteoporosis10.1210/er.2009-0024 ↗