The impact of surface scratches on the corrosion behavior of nanocrystalline high entropy alloy coatings: Electrochemical experiments and first-principles study
Source abstract
Abstract
To prolong the service life of engineering components used in aggressive environments, a TiZrHfMoW refractory high entropy alloy (RHEA) coating was prepared onto a titanium alloy substrate. Various electrochemical analytical techniques were used to evaluate the corrosion resistance of the scratched RHEA coating in a 3.5 wt.% NaCl solution. The electrochemical corrosion tests indicate that the scratched RHEA coating exhibits a higher electrochemical stability and a lower corrosion rate than the bare titanium alloy. The effects of the localized plastic deformation on the corrosion behavior for the RHEA coating was investigated. A slab model for the RHEA surface was proposed for the first-principles calculation to explored the change of the electron work function (EWF) as a function of external stress. The influence of the constituent elements in the RHEA on the mechanical properties and the electron work function was study to uncover the mechanism underlying the high scratch corrosion resistance of the RHEA coating and provide guidance for the composition design of refractory high entropy alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Damage tolerance in engineering components: implementation to anchor heads10.1016/j.engfracmech.2022.108503 ↗
2. Deformation behavior and dominant abrasion micro mechanisms of tempering steel with varying carbon content under controlled scratch testing10.1016/j.wear.2019.01.073 ↗
3. Corrosion fatigue lifetime assessment of high-speed railway axle EA4T steel with artificial scratch10.1016/j.engfracmech.2021.107588 ↗
4. Fatigue life prediction of TC17 titanium alloy based on micro scratch10.1016/j.ijfatigue.2020.105793 ↗
5. Size effect of scratches on the degradation behavior of alloy 690TT in high temperature caustic solution10.1016/j.corsci.2021.109314 ↗
6. Effects of surface grinding for scratched alloy 690TT tube in PWR nuclear power plant: microstructure and stress corrosion cracking10.1016/j.jmst.2021.11.009 ↗
7. Characteristics of the corrosion products on three scratched heat-resisting alloys in closed-loop supercritical and high-temperature CO210.1016/j.corsci.2022.110148 ↗
8. Localized corrosion behavior of scratches on nickel-base Alloy 690TT10.1016/j.electacta.2010.08.028 ↗
9. Effect of surface scratch depth on microstructure change and stress corrosion cracking behavior of alloy 690TT steam generator tube10.1016/j.corsci.2021.109792 ↗
10. Corrosion response of surface engineered titanium alloys damaged by prior abrasion10.1016/S0043-1648(01)00753-0 ↗
11. A primary study of the effect of hydrostatic pressure on stress corrosion cracking of Ti-6Al-4 V alloy in 3.5% NaCl solution10.1016/j.corsci.2019.108402 ↗
12. Pitting corrosion on anodized titanium: effect of halides10.1002/maco.201810171 ↗
13. Fretting corrosion behavior of experimental Ti-20Cr compared to titanium10.3390/ma10020194 ↗
14. Synergistic effect of F− ions and scratch on the dynamic corrosion behavior of ZTi6010.1016/j.corsci.2022.110355 ↗
15. Mechanical properties and corrosion behaviour after scratch and tribological tests of electrodeposited Co-Mo/TiO2 nano-composite coatings10.1016/j.apsusc.2018.12.099 ↗
16. Electrochemical investigation of chromium nanocarbide coated Ti–6Al–4 V and Co–Cr–Mo alloy substrates10.1016/j.electacta.2011.10.085 ↗
17. Effect of TiN coating on functional properties of implant titanium alloy10.4028/www.scientific.net/SSP.147-149.782 ↗
18. Understanding of fracture conditions and material response in a model TiN film/stainless steel substrate system – A cross-sectional scratch test study10.1016/j.surfcoat.2022.128340 ↗
19. TiN versus TiSiN coatings in indentation, scratch and wear setting10.1016/j.apsusc.2021.150356 ↗
20. Iodine-induced stress corrosion cracking behavior of alloy ZIRLO with Zr coatings by electrodepositing with different pulse current densities10.1016/j.corsci.2021.109890 ↗
21. A machine learning-based alloy design system to facilitate the rational design of high entropy alloys with enhanced hardness10.1016/j.actamat.2021.117431 ↗
22. Composition design and preparation process of refractory high-entropy alloys: a review10.1016/j.ijrmhm.2022.105836 ↗
23. Friction and wear behavior of a single-phase equiatomic TiZrHfNb high-entropy alloy studied using a nanoscratch technique10.1016/j.actamat.2018.01.014 ↗
24. The scratch behaviour of AlXCoCrFeNi (x=0.3 and 1.0) high entropy alloys10.1016/j.wear.2019.03.026 ↗
25. Strain rate dependent deformation behavior of BCC-structured Ti29Zr24Nb23Hf24 high entropy alloy at elevated temperatures10.1016/j.jallcom.2021.161859 ↗
26. Evaluation of corrosion resistance of the single-phase light refractory high entropy alloy TiCrVNb0.5Al0.5 in chloride environment10.1016/j.jallcom.2020.158278 ↗
27. Corrosion and serration behaviors of TiZr0.5NbCr0.5VxMoy high entropy alloys in aqueous environments10.3390/met4040597 ↗
28. Titanium bipolar plates augmented by nanocrystalline TiZrHfMoW coatings for application in proton exchange membrane fuel cells10.1016/j.apsusc.2022.153200 ↗
29. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
30. Electrochemical noise analysis to identify the corrosion type using the stockwell transform and the shannon energy: part II10.1016/j.jelechem.2019.113597 ↗
31. Novel time–frequency characterization of electrochemical noise data in corrosion studies using Hilbert spectra10.1016/j.corsci.2012.09.007 ↗
32. Efficient stochastic generation of special quasirandom structures10.1016/j.calphad.2013.06.006 ↗
33. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
34. Effect of Zr on phase separation, mechanical and corrosion behavior of heterogeneous CoCrFeNiZr high-etropy alloy10.1016/j.jmst.2021.08.062 ↗
35. Plastic deformation of solid-solution strengthened Hf-Nb-Ta-Ti-Zr body-centered cubic medium/high-entropy alloys10.1016/j.scriptamat.2021.113927 ↗
36. Compositional dependence of hydrogenation performance of Ti-Zr-Hf-Mo-Nb high-entropy alloys for hydrogen/tritium storage10.1016/j.jmst.2019.08.060 ↗
37. Unexpected crystallographic structure, phase transformation, and hardening behavior in the AlCoCrFeNiTi0.2 high-entropy alloy after high-dose nitrogen ion implantation
38. Corrosion behavior of two bipolar plate materials in simulated PEMFC environment by electrochemical noise technique10.1016/j.electacta.2007.01.080 ↗
39. On the stability of the passive Ti-6Al-4 V film of friction stir welds with stainless steel: effect of not native metal species10.1016/j.electacta.2020.136900 ↗
40. Potentiodynamic polarization behaviour of AISI type 316 stainless steel in NaCl solution10.1016/j.corsci.2013.04.028 ↗
41. Electrochemical noise (EN) technique: review of recent practical applications to corrosion electrochemistry research10.1080/01694243.2019.1587224 ↗
42. Spectral analysis of electrochemical noise with different transient shapes10.1016/S0013-4686(99)00406-5 ↗
43. Sensing localised corrosion by means of electrochemical noise detection and analysis10.1016/j.snb.2009.03.061 ↗
44. Formation mechanism and corrosion performance of phosphate conversion coatings on AZ91 and Mg-Gd-Y-Zr alloy10.1149/2.0221810jes ↗
45. A novel approach for the evaluation of under deposit corrosion in marine environments using combined analysis by electrochemical impedance spectroscopy and electrochemical noise10.1016/j.electacta.2016.08.146 ↗
46. Effects of scratching on corrosion and stress corrosion cracking of Alloy 690TT at 58 °C and 330 °C10.1016/j.corsci.2009.07.015 ↗
47. Effects of strain localization on the corrosion behavior of ultra-fine grained aluminum alloy AA606110.1016/j.corsci.2018.04.023 ↗
48. Effects of dissolved oxygen on partial slip fretting corrosion of Alloy 690TT in high temperature pure water10.1016/j.jnucmat.2020.152483 ↗
49. Why does pitting preferentially occur on shear bands in bulk metallic glasses10.1016/j.intermet.2013.05.006 ↗
50. Wettability, electron work function and corrosion behavior of CoCrFeMnNi high entropy alloy films10.1016/j.surfcoat.2020.126222 ↗
51. Mechanical properties and stability of Body-Centered-Tetragonal C8 at high pressures10.1515/zna-2018-0164 ↗
52. Exploring the mechanical anisotropy and ideal strengths of tetragonal B4CO410.3390/ma10020128 ↗
53. Study of electronic structure, stabilities and electron localization behavior of AgPbn (n=1–14) nanoclusters: a first principal investigation10.1016/j.physe.2021.114725 ↗
54. Toughening of α-Nb5Si3 by Ti10.1016/j.jallcom.2016.07.317 ↗
55. First-principles study on pitting corrosion of Al deoxidation stainless steel with rare earth element (La) treatment
56. Influence of surface morphology on corrosion and electronic behavior10.1016/j.actamat.2005.09.017 ↗