Three-dimensional printing of CaTiO3 incorporated porous β-Ca2SiO4 composite scaffolds for bone regeneration
Source abstract
Abstract
Abstract Three-dimensional (3D) printed bioceramics derived from silicone are of great interest in bone tissue engineering owing to their simple processes and low cost. In this study, calcium titanate (CaTiO3) incorporated porous β-Ca2SiO4 (C2S) composite scaffolds have been successfully fabricated from preceramic resin loaded with CaCO3 and TiO2 fillers by 3D printing. The fabricated scaffolds possessed uniform interconnected macropores (ca. 400 μm). The biocompatibility and bioactivity of the CaTiO3-incorporated porous C2S scaffolds were assessed and found that the increase of CaTiO3 significantly decreased the dissolution of the C2S scaffolds, and promoted the cell proliferation and differentiation into osteoblasts. Moreover, CaTiO3-incorporated porous C2S scaffolds possessed a better osteogenic capacity than pure C2S scaffolds in vivo. Therefore, the 3D printed CaTiO3 incorporated porous C2S composite scaffolds would be a promising candidate for bone tissue engineering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair10.1016/j.addr.2015.03.013 ↗
2. Biomimetic approaches in bone tissue engineering: integrating biological and physicomechanical strategies10.1016/j.addr.2014.09.005 ↗
3. Biomimetic approaches for bone tissue engineering10.1089/ten.teb.2016.0289 ↗
4. Scaffolds for bone tissue engineering: state of the art and new perspectives10.1016/j.msec.2017.05.017 ↗
5. 3D printing of pearl/CaSO4 composite scaffolds for bone regeneration10.1039/C7TB02667F ↗
6. Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants10.1016/j.biomaterials.2007.10.023 ↗
7. Three-dimensional bioprinting for bone tissue regeneration10.1016/j.cobme.2017.03.005 ↗
8. Bone tissue engineering using 3D printing10.1016/j.mattod.2013.11.017 ↗
9. Designing biomaterials for 3D printing10.1021/acsbiomaterials.6b00121 ↗
10. 3D-printed poly(ɛ-caprolactone) scaffold integrated with cell-laden chitosan hydrogels for bone tissue engineering10.1038/s41598-017-13838-7 ↗
11. Progress of 3D printing for biomaterials
12. Recent advances in extrusion-based 3D printing for biomedical applications10.1002/adhm.201701161 ↗
13. Third-generation biomedical materials10.1126/science.1067404 ↗
14. 3D-printed bioceramic scaffolds: from bone tissue engineering to tumor therapy10.1016/j.actbio.2018.08.026 ↗
15. Bioinorganics in bioactive calcium silicate ceramics for bone tissue repair: bioactivity and biological properties
16. Influence of preparation conditions on the microstructure and bioactivity of alpha-CaSiO3 ceramics: formation of hydroxyapatite in simulated body fluid10.1002/1097-4636(200010)52:1<30::AID-JBM5>3.0.CO;2-Z ↗
17. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
18. Reconstruction of calvarial defect of rabbits using porous calcium silicate bioactive ceramics10.1016/j.biomaterials.2008.03.013 ↗
19. Three-dimensional printing of tricalcium silicate/mesoporous bioactive glass cement scaffolds for bone regeneration10.1039/C6TB02055K ↗
20. Zirconia incorporation in 3D printed β-Ca2SiO4 scaffolds on their physicochemical and biological property10.15541/jim20180466 ↗
21. The effect of calcium sulfate incorporation on physiochemical and biological properties of 3D-printed mesoporous calcium silicate cement scaffolds10.1016/j.micromeso.2016.11.031 ↗
22. Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid10.1016/S0955-2219(01)00301-6 ↗
23. Comparative study of apatite formation on CaSiO3 ceramics in simulated body fluids with different carbonate concentrations
24. The effect of strontium incorporation into CaSiO3 ceramics on their physical and biological properties10.1016/j.biomaterials.2007.04.002 ↗
25. 3D printing of ceramic-based scaffolds for bone tissue engineering: an overview10.1039/C8TB00677F ↗
26. Mechanical and physical properties of calcium silicate/alumina composite for biomedical engineering applications10.1016/j.jmbbm.2013.10.024 ↗
27. Dental implants from functionally graded materials10.1002/jbm.a.34588 ↗
28. Mechanical properties of sol–gel calcium titanate bioceramic coatings on titanium10.1016/j.surfcoat.2007.07.091 ↗
29. Titanium nanotubes induce osteogenic differentiation through the FAK/RhoA/YAP cascade10.1039/C6RA04002K ↗
30. Improved bioactivity of 3D printed porous titanium alloy scaffold with chitosan/magnesium-calcium silicate composite for orthopaedic applications10.3390/ma12020203 ↗
31. A study on the mechanism of protein adsorption to TiO210.1016/0142-9612(91)90057-H ↗
32. Evaluation of degradability of CaTiO3 thin films in simulated body fluids10.2320/matertrans.45.1778 ↗
33. Characterization of hydroxyapatite-perovskite (CaTiO3) composites: phase evaluation and cellular response10.1002/jbm.b.31716 ↗
34. Testing sol–gel CaTiO3 coatings for biocompatible applications10.1016/S0928-4931(02)00319-3 ↗
35. XPS study of apatite-based coatings prepared by sol–gel technique10.1016/S0169-4332(99)00267-6 ↗
36. CaTiO3 coating on titanium for biomaterial application--optimum thickness and tissue response10.1002/jbm.a.31136 ↗
37. Three-dimensional printing of cerium-incorporated mesoporous calcium-silicate scaffolds for bone repair10.1007/s10853-015-9406-1 ↗
38. Hydroxyapatite whisker-reinforced composite scaffolds through 3D printing for bone repair10.15541/jim20160628 ↗
39. Incorporation of titanium into calcium silicate improved their chemical stability and biological properties10.1002/jbm.a.31623 ↗
40. 3D printed porous β-Ca2SiO4 scaffolds derived from preceramic resin and their physicochemical and biological properties10.1080/14686996.2018.1471653 ↗
41. Activation of phospholipase D1 by surface roughness of titanium in MG63 osteoblast-like cell10.1016/j.biomaterials.2006.06.023 ↗
42. Response of MG63 osteoblast-like cells to titanium and titanium alloy is dependent on surface roughness and composition10.1016/S0142-9612(98)00144-6 ↗
43. Novel isolation of alkaline phosphatase-positive subpopulation from periodontal ligament fibroblasts10.1902/jop.2003.74.6.780 ↗
44. 3D printed mesoporous bioactive glass/metal-organic framework scaffolds with antitubercular drug delivery10.1016/j.micromeso.2018.06.012 ↗
45. Concepts of osteoblast growth and differentiation: basis for modulation of bone cell development and tissue formation10.1177/10454411920030030501 ↗