Mixed anodic oxides for forming-free memristors revealed by combinatorial screening of hafnium-tantalum system
Source abstract
Abstract
A combinatorial screening approach has been designed for identification of Hf-Ta anodic memristors with enhanced properties. Three distinct compositional zones with similar characteristics have been identified, two of which are relevant for memristive applications. In a Hf-poor zone, (< 50 at.% Hf), the memristive behavior is similar to that of anodic Ta2O5. A second compositional zone (Hf content between 50 and 70 at.%) produced anodic memristors which dramatically differ. Devices in this region resemble forming-free unipolar behavior and show resistive states ratios of more than 8 orders of magnitude while retaining and enduring more than one million switching cycles. Photoelectron spectroscopy with soft and hard X-rays has been applied for understanding the chemistry of these special anodic structures and enrichment of Hf species close to the surface of anodic oxides has been evidenced. Unlike bipolar memristors from the first zone, the newly identified unipolar memristors show an in-depth homogeneous local chemical state of Hf and lower electronic polarizabilities for both O and Hf. High-resolution transmission electron microscopy reveals HfO2 crystallites embedded into an amorphous oxide matrix. These entities formed during the anodization process are considered to be responsible for the coexistence of threshold and non-volatile memristive characteristics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Memory and Neural Computing · Neuroscience and Neural Engineering · Ferroelectric and Negative Capacitance Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Resistive-switching memory effects of NiO nanowire/metal junctions10.1021/ja101742f ↗
2. Inducing tunable switching behavior in a single memristor10.1016/j.apmt.2018.03.003 ↗
3. A high-speed MIM resistive memory cell with an inherent vanadium selector
4. Vacancy associates-rich ultrathin nanosheets for high performance and flexible nonvolatile memory device10.1021/jacs.5b00021 ↗
5. Supramolecular self-assembly in a sub-micrometer electrodic cavity: fabrication of heat-reversible π-gel memristor10.1021/jacs.7b04347 ↗
6. State of the art of metal oxide memristor devices10.1515/ntrev-2015-0029 ↗
7. The future of electronics based on memristive systems10.1038/s41928-017-0006-8 ↗
8. Bioinspired bio-voltage memristors10.1038/s41467-020-15759-y ↗
9. Resistive switching memories based on metal oxides: mechanisms, reliability and scaling10.1088/0268-1242/31/6/063002 ↗
10. Memristive switches enable stateful logic operations via material implication10.1038/nature08940 ↗
11. A review on memristive devices and applications
12. Nanoionics-based resistive switching memories10.1142/9789814287005_0016 ↗
13. Memristive behavior in thin anodic Titania10.1109/LED.2010.2049092 ↗
14. Oxide layer thickness effects on the resistance switching characteristics of Ti/TiO2-NT/Au structure
15. Anodic oxidation as a means to produce memristive films
16. Hafnium-doped tantalum oxide high-k gate dielectrics10.1149/1.2180647 ↗
17. Hafnium-doped tantalum oxide high- k dielectrics with sub-2nm equivalent oxide thickness10.1063/1.2140482 ↗
18. Phosphate incorporation in anodic hafnium oxide memristors10.1016/j.apsusc.2021.149093 ↗
19. Electrochemically prepared oxides for resistive switching memories10.1039/C8FD00112J ↗
20. Use of anodic tantalum pentoxide for high-density capacitor fabrication10.1023/A:1008901624514 ↗
21. The oxidation process and dissipation factor of Al/Ta/Hf multilayered anodized thin-film capacitors10.1002/ecjb.4420771207 ↗
22. Combinatorial investigation of Hf-Ta thin films and their anodic oxides10.1016/j.electacta.2010.03.066 ↗
23. Lohrengel · Rev. J. Mater. Sci. · 1993 · 12 · 24310.1016/0927-796X(93)90005-N ↗
24. Improvement in conductance modulation linearity of artificial synapses based on NaNbO3 memristor
25. A self-rectifying TaOy/nanoporous TaOx memristor synaptic array for learning and energy-efficient neuromorphic systems10.1038/s41427-018-0101-y ↗
26. Solution-processed, low voltage tantalum-based memristive switches10.1016/j.matlet.2020.127676 ↗
27. Influence of electrolyte selection on performance of tantalum anodic oxide memristors10.1016/j.apsusc.2021.150608 ↗
28. Electrolyte-dependent modification of resistive switching in anodic hafnia10.3390/nano11030666 ↗
29. Gallium-enhanced aluminum and copper electromigration performance for flexible electronics10.1021/acsami.0c22211 ↗
30. Sodium phosphate
31. Proposed formula for electron inelastic mean free paths based on calculations for 31 materials10.1016/S0039-6028(87)81156-1 ↗
32. Coexistence of bipolar and unipolar resistive switching behaviors in a Pt TiO2 Pt stack10.1149/1.2742989 ↗
33. Recommended methods to study resistive switching devices10.1002/aelm.201800143 ↗
34. The coexistence of threshold and memory switching characteristics of ALD HfO2memristor synaptic arrays for energy-efficient neuromorphic computing10.1039/D0NR02335C ↗
35. A HfO 2 /site based dual-layer selector device with minor threshold voltage variation10.3390/nano9030408 ↗
36. Research progress on solutions to the sneak path issue in memristor crossbar arrays10.1039/D0NA00100G ↗
37. Reversible transition of volatile to non-volatile resistive switching and compliance current-dependent multistate switching in IGZO/MnO RRAM devices10.1063/1.5082901 ↗
38. Controllable volatile to nonvolatile resistive switching conversion and conductive filaments engineering in Cu/ZrO2/Pt devices
39. Coexistence of diode-like volatile and multilevel nonvolatile resistive switching in a ZrO2/TiO2 stack structure
40. Parylene based memristive devices with multilevel resistive switching for neuromorphic applications10.1038/s41598-019-47263-9 ↗
41. A multilevel memristor-CMOS memory cell as a ReRAM10.1016/j.mejo.2015.10.006 ↗
42. Study of multilevel programming in programmable metallization cell (PMC) memory10.1109/TED.2009.2016019 ↗
43. Unipolar resistive-switching mechanisms
44. Analysis on the filament structure evolution in reset transition of Cu/HfO2/Pt RRAM device
45. Unipolar resistive switching with forming-free and self-rectifying effects in Cu/HfO2/n-Si devices
46. A multi-level memristor based on Al-doped HfO2 thin film10.1186/s11671-019-3015-x ↗
47. Investigation of the retention performance of an ultra-thin HfO2 resistance switching layer in an integrated memory device
48. Filament growth and resistive switching in hafnium oxide memristive devices10.1021/acsami.7b19836 ↗
49. Concepts for chemical state analysis at constant probing depth by lab-based XPS/HAXPES combining soft and hard X-ray sources10.1002/sia.6790 ↗
50. Chemical shifts of Auger lines, and the Auger parameter10.1039/dc9756000291 ↗
51. Auger and photoelectron line energy relationships in aluminium-oxygen and silicon-oxygen compounds10.1116/1.571870 ↗
52. The auger parameter, its utility and advantages: a review10.1016/0368-2048(88)85018-7 ↗
53. Auger spectroscopy and the electronic structure of crystals10.1016/0368-2048(94)02109-0 ↗
54. Watts · 2019
55. Auger parameter and wagner plot in the characterization of chemical states: initial and final state effects10.1016/0368-2048(95)02443-3 ↗
56. Thermodynamics controls amorphous oxide formation: exclusive formation of a stoichiometric amorphous (Al0.33Zr0.67)O1.83 phase upon thermal oxidation of Al-Zr10.1016/j.actamat.2015.04.038 ↗
57. Williams · 2009
58. K. Persson, Materials data on Pt (SG:225) by materials project, (2015), doi:10.17188/1189002.
59. K. Persson, Materials data on HfO2 (SG:225) by materials project, (2014), doi:10.17188/1267443.
60. K. Persson, Materials data on HfO2 (SG:14) by materials project, (2014), doi:10.17188/1206948.
61. Highly uniform resistive switching in HfO2 films embedded with ordered metal nanoisland arrays
62. Enhanced resistive switching characteristics in Al2O3 memory devices by embedded Ag nanoparticles