Dual-ionic hydrogels with ultralong anti-dehydration lifespan and superior anti-icing performance
Source abstract
Abstract
Water-rich hydrogels find a wide range of promising applications due to their combined solid/liquid-like properties. However, hydrogels often exhibit a short lifespan and suffer from functional failure due to water depletion via rapid evaporation and icing/freezing under low temperatures. To tackle these challenges, here we developed a Ca2+ and hydrophilic bonded -SO3− group-based dual-ionic hydrogel (DIH) which possesses an ultralong anti-dehydration lifespan and outstanding anti-icing properties. The as-developed DIH can keep wet and flexible as its initial state for longer than 8 months in practical room environment (15–35 °C, relative humidity of 30–90%), and show low ice adhesion of 2.3 kPa and durably frost-free property at -10.0 °C as well as anti-freezing property down to -49.0 °C. According to the molecular dynamic simulations and experimental results, the superior anti-dehydration performances are due to the low-diffusion and high absorption capacity and self-replenishment of water via the dual-ionic strategy; the sufficient anti-icing Ca2+ result in the extremely low melting point and anti-icing properties of the DIH. This design sheds new light on developing next-generation durable hydrogels with applications in soft materials and functional surfaces under harsh conditions of both low humidity and low temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Hydrogel machines10.1016/j.mattod.2019.12.026 ↗
2. Hydrogels and hydrogel-derived materials for energy and water sustainability10.1021/acs.chemrev.0c00345 ↗
3. Physical organohydrogels with extreme strength and temperature tolerance10.3389/fchem.2020.00102 ↗
4. Bioinspired ultra-stretchable and anti-freezing conductive hydrogel fibers with ordered and reversible polymer chain alignment10.1038/s41467-018-05904-z ↗
5. Antifreezing heat-resistant hollow hydrogel tubes10.1021/acsami.9b03892 ↗
6. Self-powered locomotion of a hydrogel water strider10.1126/scirobotics.abe7925 ↗
7. Self-deicing electrolyte hydrogel surfaces with pa-level ice adhesion and durable antifreezing/antifrost performance10.1021/acsami.0c06912 ↗
8. Bioinspired multifunctional anti-icing hydrogel10.1016/j.matt.2019.12.017 ↗
9. Biomimetic extreme-temperature- and environment-adaptable hydrogels10.1002/cphc.201900545 ↗
10. Biomimetic anti-freezing polymeric hydrogels: keeping soft-wet materials active in cold environments10.1039/D0MH01029D ↗
11. Skin-inspired hydrogel-elastomer hybrids with robust interfaces and functional microstructures10.1038/ncomms12028 ↗
12. Structural changes of water in poly(vinyl alcohol) hydrogel during dehydration10.1063/1.4862996 ↗
13. Rational fabrication of anti-freezing, non-drying tough organohydrogels by one-pot solvent displacement10.1002/anie.201803366 ↗
14. Triboelectric-nanogenerator-based soft energy-harvesting skin enabled by toughly bonded elastomer/hydrogel hybrids10.1021/acsnano.8b00108 ↗
15. High-strength nanocomposite hydrogels with swelling-resistant and anti-dehydration properties10.3390/polym10091025 ↗
16. Facile preparation of hydrogen-bonded supramolecular polyvinyl alcohol-glycerol gels with excellent thermoplasticity and mechanical properties10.1016/j.polymer.2017.01.051 ↗
17. A flexible rechargeable aqueous zinc manganese-dioxide battery working at -20°C10.1039/C8EE02892C ↗
18. Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt10.1063/1.4898189 ↗
19. Wearable and washable conductors for active textiles10.1021/acsami.7b07361 ↗
20. Adaptive and freeze-tolerant heteronetwork organohydrogels with enhanced mechanical stability over a wide temperature range10.1038/ncomms15911 ↗
21. Bioinspired tough organohydrogel dynamic interfaces enabled subzero temperature antifrosting, deicing, and antiadhesion10.1021/acsami.0c17163 ↗
22. Swelling and drying process in ionic hydrogels for low and high pH using fluorescence technique
23. Moisture absorption and absorption kinetics in polyelectrolyte films: influence of film thickness10.1021/la035239i ↗
24. Highly stretchable and tough hydrogels below water freezing temperature10.1002/adma.201801541 ↗
25. A Ca2+-dependent bacterial antifreeze protein domain has a novel β-helical ice-binding fold10.1042/BJ20071372 ↗
26. A comprehensive study of hygroscopic properties of calcium- and magnesium-containing salts: implication for hygroscopicity of mineral dust and sea salt aerosols10.5194/acp-19-2115-2019 ↗
27. Hydration structure of strongly bound water on the sulfonic acid group in a nafion membrane studied by infrared spectroscopy and quantum chemical calculation10.1039/C5CP00567A ↗
28. Synthesis of poly (2-acrylamido-2-methyl propane sulfonic acid) with high water absorbency and absorption under load (AUL) as concrete grade superabsorbent and its performance10.1016/j.conbuildmat.2019.02.070 ↗
29. Water absorption and antimicrobial behavior of physically cross linked poly (vinyl alcohol)/carrageenan films loaded with minocycline10.1080/15685551.2016.1187444 ↗
30. Harvesting water from air: using anhydrous salt with sunlight10.1021/acs.est.7b06373 ↗
31. Revising the hygroscopicity of inorganic sea salt particles10.1038/ncomms15883 ↗
32. Hygroscopic properties of calcium chloride and its role on cold-end corrosion in biomass combustion10.1021/acs.energyfuels.9b02731 ↗
33. Tough adhesion of freezing- and drying-tolerant transparent nanocomposite organohydrogels10.1021/acsami.1c04758 ↗
34. Enhancing the performance of a stretchable and transparent triboelectric nanogenerator by optimizing the hydrogel ionic electrode property10.1021/acsami.0c04219 ↗
35. A conductive, self-healing hybrid hydrogel with excellent water-retention and thermal stability by introducing ethylene glycol as a crystallization inhibitor10.1016/j.colsurfa.2020.125443 ↗
36. Hygroscopic properties of calcium chloride and its role on cold-end corrosion in biomass combustion10.1021/acs.energyfuels.9b02731 ↗
37. The effects of surface wettability on the fog and dew moisture harvesting performance on tubular surfaces10.1038/srep24276 ↗
38. Hydrophilic directional slippery rough surfaces for water harvesting10.1126/sciadv.aaq0919 ↗
39. Water capture by a desert beetle10.1038/35102108 ↗
40. Anti-icing coating with an aqueous lubricating layer10.1021/am501252u ↗
41. Fabrication of robust and durable slippery anti-icing coating on textured superhydrophobic aluminum surfaces with infused silicone oil10.1016/j.apsusc.2019.143677 ↗
42. Designing durable icephobic surfaces10.1126/sciadv.1501496 ↗