Additive manufacturing technology empowered complex electromechanical energy conversion devices and transformers
Source abstract
Abstract
Abstract Additive manufacturing technology (AMT) is popularly known as 3-dimensional (3D) printing has emerged as a reliable, efficient, and cost-effective method for the production of complex 3D-physical models. Effectively coordinated advanced 3D printing technological developments as well as the advanced integrated techniques with pre-existed 2-dimensional (2D) printing techniques have expedited the expansion of this technology to various applications in wide-field disciplines. In this paper, we aim to provide principles of machines and transformers; a comprehensive overview of additive printing technology, process, and the AMT facilitated compatible materials for empowered complex electromechanical energy conversion devices and transformers. Electromechanical energy conversion devices and transformers supply most of the electricity to all applications. Hence, we have provided an informative report broadcasting of additively manufactured electromechanical devices and transformers with significant utilization in electrical power industries. Additionally, AMT advances in electromechanical energy conversion devices such as electrical machines (motors, generators, and transformers) were described. Also, the traditional methods induced complexities overcoming AMT technique and their advantages were elucidated. Thus the additive manufacturing technology is acceptable for fabricating complex electromechanical devices and transformers additionally acquiring the performance, reliability, and cost-effectiveness of the same. Moreover, the current body of research in 3D printed manufacturing is summarized, and the challenges are highlighted to assist in the further development of this field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Modular Robots and Swarm Intelligence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives10.1016/S0007-8506(07)60206-6 ↗
2. A review of additive manufacturing10.5402/2012/208760 ↗
3. Energy harvesting with 3D-printed electrostatic generators
4. E.M. Sachs, J.S. Haggerty, M.J. Cima, P.A. Williams, Three-dimensional printing techniques, U.S. Patent No. 5,204,055, 1993. https://www.google.com/patents/US5204055.
5. C.R. Deckard, Method and apparatus for producing parts by selective sintering, PCT Patent WO1988002677 A2, 1986.
6. Comparison of density of stainless steel 316L parts produced with selective laser melting using different powder grades
7. F.P. Jeantette, D.M. Keicher, J.A. Romero, L.P. Schanwald, Method and system for producing complex-shape objects, US Patent US 6046426 A, 1996.
8. L.E. Andersson, M. Larsson, Device and arrangement for producing a three-dimensional object, US Patent US 7537722 B2, 2000.
9. Gibson · 2010
10. C.W. Hull, 1986. Apparatus for production of three-dimensional objects by stereolithography. US Patent 4,575,330.
11. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
12. The potential of 3D printing to reduce the environmental impacts of production
13. P.W.C. & Zpryme survey and analysis “Disruptive Manufacturing Innovative Survey” https://ec.europa.eu/growth/toolsdatabases/dem/monitor/sites/default/files/DTM_The%20disruptive%20nature%20of%203D%20printing%20v1.pdf. 2014.
14. Mill · 2013
15. Adam · 2009
16. Additive manufacturing technology: potential implications for US manufacturing competitiveness
17. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives10.1016/S0007-8506(07)60206-6 ↗
18. Hawary · 1986
19. Wohlers · 2012
20. Additive manufacturing: technology, applications and research needs10.1007/s11465-013-0248-8 ↗
21. The kit of power and secondary equipment scaled models
22. Smith · 2009
23. Effect of process control and powder quality on Inconel 718 produced using electron beam melting
24. Study on microstructure and mechanical properties of laser rapid forming Inconel 71810.1016/j.msea.2007.05.079 ↗
25. Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured INCONEL 71810.1007/s11661-009-9949-3 ↗
26. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
27. 3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications10.1007/s10404-016-1715-4 ↗
28. 3D printing with polymers: challenges among expanding options and opportunities10.1016/j.dental.2015.09.018 ↗
29. Metal-based inkjet inks for printed electronics10.2174/1874183501104010019 ↗
30. Formulation of Sol–Gel derived bismuth silicate dielectric in for flexible electronic applications10.1021/acs.iecr.6b00871 ↗
31. Formulation of novel screen-printable dielectric ink for fully-printed TIPs pentacene OFETs10.1039/C4RA06931E ↗
32. The status, challenges, and future of additive manufacturing in engineering10.1016/j.cad.2015.04.001 ↗
33. 3-D printed metal-pipe rectangular waveguides10.1109/TCPMT.2015.2462130 ↗
34. Daniel · 2013
35. U.S. Energy Information Administration/Monthly Energy Review, Washington, DC. http://www.eia.gov/totalenergy/data/monthly, 2016. DOE/EIA-0035(2016/6).
36. Climate change 2007: Mitigation
37. Energy conservation through motors in Pakistan's industrial sector-need to use of energy efficient motors
38. Energy-efficiency policy opportunities for electric motor-driven systems
39. Effective methods for power systems grounding
40. Numerical modeling of 3D printed electric machines
41. 3D printing of electro mechanical systems
42. The impact of additive manufacturing on the development of electrical machines for MEA Applications: A feasibility study
43. Fabrication and characterization of non-resonant magneto-mechanical low-frequency vibration energy harvester10.1016/j.ymssp.2017.09.036 ↗
44. Structural optimization of a direct-drive wind turbine generator inspired by additive manufacturing10.1016/j.promfg.2018.07.084 ↗
45. GE Nine Sigma, Names 10 Finalists in GE Global 3D Printing Production Quest, Cleveland, https://www.ninesigma.com/press-release/ninesigma-ge-announce-selection-of-10-finalists-in-ge-global-3d-printing-production-quest, 2013.
46. Additive manufacturing of metal structures at the micrometer scale10.1002/adma.201604211 ↗
47. Influences of process parameters on rare earth magnets produced by laser beam melting
48. Fabrication of highly dense isotropic Nd-Fe-B nylon bonded magnets via extrusion-based additive manufacturing10.1016/j.addma.2018.04.001 ↗
49. Wawrzyniak · 2016
50. Magnetic characteristic analysis of the motor considering 2-D vector magnetic property10.1109/TMAG.2006.871468 ↗
51. Influence of the magnetic anisotropy on electrical machines
52. 3D printing magnetic material with arbitrary anisotropy
53. Matshediso · 2013 · 33
54. Magnetostriction distribution in a model transformer core
55. Relevance of magnetostriction and forces for the generation of audible noise of transformer cores10.1109/20.908346 ↗
56. John · 2012
57. Beach · 1999 · 119
58. Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 71810.1016/j.matdes.2015.10.155 ↗
59. The effect of nitrogen annealing on lithium ion intercalation in nickel-doped lithium trivanadate10.1007/s11434-015-0970-1 ↗
60. Progress of phase-field investigations of CO rafting in nickel-base single-crystal superalloys10.1007/s11434-014-0228-3 ↗
61. Aging effects on the microstructure and creep behavior of Inconel 718 superalloy10.1016/j.msea.2008.04.097 ↗
62. The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools10.1016/j.matdes.2006.09.004 ↗
63. Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured Inconel 71810.1007/s11661-009-9949-3 ↗
64. Study on the machinability characteristics of superalloy Inconel 718 during high speed turning10.1016/j.matdes.2008.07.011 ↗
65. Hybrid machining of Inconel 71810.1016/S0890-6955(03)00134-2 ↗
66. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
67. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles10.1016/j.matdes.2015.10.027 ↗
68. Effect of surface conditioning on the flowability of Ti6Al7Nb powder for selective laser melting applications10.1016/j.apsusc.2011.11.081 ↗
69. Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting10.1016/j.matdes.2015.12.135 ↗
70. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
71. Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting10.1016/j.matdes.2015.10.065 ↗
72. Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting10.1016/j.matlet.2015.10.136 ↗
73. Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms10.1007/s11434-016-1098-7 ↗
74. PM Lightweight and Porous Materials: Direct Typing-a New Method for the Production of Cellular P/M Parts
75. 3D Screen Printing technology—Opportunities to use revolutionary materials and machine designs
76. Stone · 2004
77. Juha · 2013
78. Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors10.1109/TEC.2005.847979 ↗
79. X. Ye, Kilowatt Three-phase Rotary Transformer Design for Permanent Magnet DC Motor with On-rotor Drive System, http://www.diva-portal.org/smash/get/diva2:932733/FULLTEXT01.pdf, 2016.
80. Iron-loss modeling for rotating machines: comparison between Bertotti's three-term expression and 3-D eddy-current analysis10.1109/TMAG.2010.2044384 ↗
81. Promising applications of neodymium boron iron magnets in electrical machines10.1109/TMAG.1985.1064113 ↗
82. W.R. Mischler, Laminated motor stator structure with molded composite pole pieces. U.S. Patent 4,255,684, 1981.
83. Spray-Formed Hybrid-Field Electric Motor
84. Jayaraman · 2017
85. Characteristic comparison of transversally laminated anisotropic synchronous reluctance motor fabrication based on 2D lamination and 3D printing
86. Metal 3D printing of synchronous reluctance motor
87. Vijay · 2016
88. Application of additive manufacturing for low torque ripple of 6/4 switched reluctance motor
89. Engineering a lunar photolithoautotroph to thrive on the moon–life or simulacrum?
90. Goodbye wires and formers: 3-D additive manufacturing and fractal cooling applied to construction of MRI gradient coils
91. Fiber encapsulation additive manufacturing: An enabling technology for 3D printing of electromechanical devices and robotic components10.1089/3dp.2015.0003 ↗
92. The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review10.1016/j.rser.2018.03.109 ↗
93. Thermal design of high power-density additively-manufactured induction motors
94. Galitsky · 2008
95. 3D printed magnetic polymer composite transformers10.1016/j.jmmm.2017.06.070 ↗
96. Additive Manufacturing of Magnetic Components for Heterogeneous Integration
97. Magnetic paste as feedstock for additive manufacturing of power magnetics
98. 3-D-printed air-core inductors for high-frequency power converters10.1109/TPEL.2015.2441005 ↗
99. Challenges in three-dimensional printing of high-conductivity copper10.1115/1.4039974 ↗
100. Development and verification of printed circuit board toroidal transformer model