Efficient oil removal from wastewater based on polymer coated superhydrophobic tetrapodal magnetic nanocomposite adsorbent
Source abstract
Abstract
Abstract We report the synthesis of an effective, biocompatible, magnetic nanosorbent polydimethylsiloxane@zinc oxide tetrapod@iron oxide nanorod nanohybrid using a hydrothermal process. The synthesized nanohybrid has been applied as a magnetic nanosorbent for oil removal from wastewater. The structural, chemical and magnetic characterizations of synthesized nanohybrid have been performed using X-ray diffraction, scanning electron microscopy, Brunauer–Emmett–Teller analysis and magnetization measurements using a superconducting quantum interference device. The prepared nanohybrid consists of ZnO tetrapods that are coated on the surface by Fe2O3 nanorods. The as-synthesized nanohybrid exhibits an exceptional adsorption ability and considerable magnetic separation due to its large surface area and high magnetic saturation value. The mechanism for the oil adsorption has been explicated by exploring different adsorption kinetics and isotherms models. It is inferred that this magnetic nanosorbent can be employed for effective oil removal from oily wastewater.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Electrohydrodynamics and Fluid Dynamics · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Enhancing oil removal from water using ferric oxide nanoparticles doped carbon nanotubes adsorbents10.1016/j.cej.2016.02.040 ↗
2. Fe3O4/PS magnetic nanoparticles: synthesis, characterization and their application as sorbents of oil from waste water10.1016/j.jmmm.2015.06.045 ↗
3. Synthesis of magnetic iron oxide nanoparticles onto fluorinated carbon fabrics for contaminant removal and oil–water separation10.1016/j.seppur.2016.11.006 ↗
4. Efficient removal of oil from oil contaminated water by superhydrophilic and underwater superoleophobic nano/micro structured TiO2 nanofibers coated mesh10.1016/j.chemosphere.2016.12.031 ↗
5. Practical oil spill recovery by a combination of polyolefin absorbent and mechanical skimmer10.1021/acssuschemeng.8b02322 ↗
6. Separation of emulsified crude oil in saline water by dissolved air flotation with micro and nanobubbles10.1016/j.seppur.2017.06.007 ↗
7. Produced water treatment by membranes: a review from a colloidal perspective10.1016/j.jcis.2016.10.013 ↗
8. Removal of emulsified oil from oily wastewater using agricultural waste barley straw10.1016/j.bej.2009.11.013 ↗
9. Coconut shell based activated carbon-iron oxide magnetic nanocomposite for fast and efficient removal of oil spills10.1016/j.jece.2015.04.028 ↗
10. Barium removal from synthetic natural and produced water using MXene as two dimensional (2-D) nanosheet adsorbent10.1016/j.cej.2017.02.090 ↗
11. Special wettable materials for oil/water separation10.1039/C3TA13397D ↗
12. Rapid adsorption for oil using superhydrophobic and superoleophilic polyurethane sponge10.1002/jctb.4646 ↗
13. ZnO tetrapods and activated carbon based hybrid composite: adsorbents for enhanced decontamination of hexavalent chromium from aqueous solution10.1016/j.cej.2018.10.031 ↗
14. Synthesis of hierarchical superhydrophobic zinc oxide nano-structures for oil/water separation10.1016/j.ceramint.2018.05.023 ↗
15. Synthesis and application of monodisperse hydrophobic magnetite nanoparticles as an oil spill collector using an ionic liquid10.1039/C7RA02426F ↗
16. ZnO tetrapod materials for functional applications10.1016/j.mattod.2017.11.003 ↗
17. Structural evolution and characteristics of the phase transformations between α-Fe2O3, Fe3O4 and γ-Fe2O3 nanoparticles under reducing and oxidizing atmospheres10.1039/c3ce41269e ↗
18. Chitosan-silica hybrid nanosorbents for oil removal from water10.1016/j.colsurfa.2017.04.076 ↗
19. Novel fabrication of a robust superhydrophobic PU@ZnO@Fe3O4@SA sponge and its application in oil–water separations10.1038/s41598-017-17761-9 ↗
20. Fabrication of superhydrophobic copper stearate@Fe3O4 coating on stainless steel meshes by dip-coating for oil/water separation10.1016/j.surfcoat.2018.06.001 ↗
21. Effect of CNT/PDMS nanocomposites on the dynamics of pioneer bacterial communities in the natural biofilms of seawater10.3390/ma11060902 ↗
22. A facile and cost-effective method for separation of oil–water mixtures using polymer-coated iron oxide nanoparticles10.1021/es5037755 ↗
23. Removal of oil from water by calcium alginate hydrogel modified with maleic anhydride10.1007/s10924-018-1188-5 ↗
24. Effective oil removal from water by magnetically driven superhydrophobic and oleophilic magnetic titania nanotubes10.1007/s11356-017-9458-7 ↗
25. Improved super-hydrophobicity of eco-friendly coating from palm oil fuel ash (POFA) waste10.1016/j.surfcoat.2017.11.070 ↗
26. Fabrication of macroscopically flexible and highly porous 3D semiconductor networks from interpenetrating nanostructures by a simple flame transport approach10.1002/ppsc.201300197 ↗
27. Porous ceramics based on hybrid inorganic tetrapodal networks for efficient photocatalysis and water purification10.1016/j.ceramint.2017.08.008 ↗
28. Direct growth of freestanding ZnO tetrapod networks for multifunctional applications in photocatalysis, UV photodetection, and gas sensing10.1021/acsami.5b02816 ↗
29. Synthesis of goethite α-FeOOH particles by air oxidation of ferrous hydroxide Fe(OH)2 suspensions: insight on the formation mechanism10.1021/cg501191h ↗
30. Removal of iron as oxyhydroxide (FeOOH) from aqueous solution by fluidized-bed homogeneous crystallization10.1016/j.jtice.2018.12.022 ↗
31. C. Infectious, D. Advance, accepted manuscript (2012) 0–13.
32. Removal of oil droplets from contaminated water using magnetic carbon nanotubes10.1016/j.watres.2013.02.056 ↗
33. Adsorptive removal of organic dyes from aqueous solutions using acrylic acid–acrylonitrile–N-isopropylacrylamide polymeric gels as adsorbents: linear and non linear isotherms10.1080/19443994.2015.1132393 ↗
34. Poly(vinyl alcohol)/Vitamin C-multi walled carbon nanotubes composites and their applications for removal of methylene blue: advanced comparison between linear and nonlinear forms of adsorption isotherms and kinetics models10.1016/j.polymer.2018.11.035 ↗
35. Hydrothermal fabrication and characterization of ZnO/Fe2O3 heterojunction devices for hydrogen production10.15406/japlr.2018.07.00246 ↗
36. Template-free synthesis of monodisperse α-Fe2O3 porous ellipsoids and their application to gas sensors10.1039/c2ce06400f ↗
37. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
38. Poly(butyl methacrylate) (PBMA) XPS reference core level and energy loss spectra10.1116/11.20051104 ↗
39. Photocurrent detection of chemically tuned hierarchical ZnO nanostructures grown on seed layers formed by atomic layer deposition10.1186/1556-276X-7-290 ↗
40. Water-soluble non-polymeric electrospun cyclodextrin nanofiber template for the synthesis of metal oxide tubes by atomic layer deposition10.1039/C4RA12073F ↗
41. PDMS residues-free micro/macrostructures on flexible substrates10.1016/j.mee.2015.04.037 ↗
42. Novel nanostructured hematite-spongin composite developed using an extreme biomimetic approach10.1039/C5RA09379A ↗
43. Investigation of multiplet splitting of Fe2p XPS spectra and bonding in iron compounds10.1002/sia.1984 ↗
44. Facile synthetic fabrication of iron oxide particles and novel hydrogen superoxide supercapacitors10.1039/c2ra01139e ↗
45. A novel metal-protected plasma treatment for the robust bonding of polydimethylsiloxane10.1039/b709761a ↗
46. Efficient separation of heavy metal cations by anchoring polyacrylic acid on superparamagnetic magnetite nanoparticles through surface modification10.1016/j.cej.2010.02.041 ↗
47. SPION/β-cyclodextrin core-shell nanostructures for oil spill remediation and organic pollutant removal from waste water10.1016/j.cej.2015.05.126 ↗
48. Removal of emulsified oil from water by fruiting bodies of macro-fungus (Auricularia polytricha)10.1371/journal.pone.0095162 ↗
49. Treatment of the oily produced water (OPW) using coagulant mixtures10.1016/j.ejpe.2015.09.006 ↗
50. Enhanced photocatalytic activity of ZnO/CuO nanocomposite for the degradation of textile dye on visible light illumination10.1016/j.msec.2012.08.011 ↗
51. Elastomeric microparticles for acoustic mediated bioseparations10.1186/1477-3155-11-22 ↗
52. c-Si/n-ZnO-based flexible solar cells with silica nanoparticles as a light trapping metamaterial10.1039/C7CP01128H ↗
53. Preparation and corrosion resistance of chromium-free Zn-Al coatings with two different silane coupling agents10.1016/j.surfcoat.2019.03.020 ↗
54. Nanomagnetic organic-inorganic hybrid (Fe@Si-Gu-Prs): a novel magnetically green catalyst for the synthesis of tetrahydropyridine derivatives at room temperature under solvent-free conditions10.1016/j.tet.2014.12.010 ↗
55. Fe3O4@SiO2-MoO3H nanoparticles: a magnetically recyclable nanocatalyst system for the synthesis of 1,8-dioxo-decahydroacridine derivatives10.1039/C6RA25571J ↗
56. Improved hydrophobicity of polydimethylsiloxane (PDMS) coating with ZnO nanostructures10.1088/1742-6596/1082/1/012106 ↗
57. Toward 3D graphene oxide gels based adsorbents for high-efficient water treatment via the promotion of biopolymers10.1016/j.jhazmat.2013.09.065 ↗
58. Efficient adsorption of oil in water by hydrophobic nonwoven fabrics coated with cross-linked polydivinylbenzene fibers10.1002/jctb.5753 ↗
59. Adsorption of soluble oil from water to graphene10.1007/s11356-014-2504-9 ↗
60. Adsorption separation of condensate oil from produced water using ACTF prepared of oil palm leaves by batch and fixed bed techniques10.1016/j.ejpe.2017.05.005 ↗