Anodic TiO2 nanotubes: A promising material for energy conversion and storage
Source abstract
Abstract
Self-organized TiO2 nanotube (TNT) layers formed by an anodization process have emerged for the conception of innovative systems in the conversion and storage of energy. Herein, the latest progress in power sources with a remarkable electrochemical performance involving these versatile nanomaterials is reported. Besides the key role of their physico-chemical properties, the significance of interfaces established with other materials to achieve the fabrication of batteries, supercapacitors and fuel cells showing high electrochemical performance is also highlighted. Particularly, recent approaches based on the chemical modifications of the TNTs by doping, solid-state reactions, atomic layer deposition, electrodeposition of metallic nanoparticles and copolymers are presented. In addition, the strong potential offered by TNT layers for future research works is discussed. This progress report seeks to demonstrate the strong input of anodic TNT layers for developing the next generation of autonomous devices while stimulating more research efforts dedicated to modern technological applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Electrocatalysts for Energy Conversion · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. High-performance flexible hydrogen sensor made of WS2 nanosheet–Pd nanoparticle composite film10.1088/0957-4484/27/19/195501 ↗
2. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
3. 3-D microbatteries10.1016/S1388-2481(02)00556-8 ↗
4. Self-supported three-dimensional nanoelectrodes for microbattery applications10.1021/nl9014843 ↗
5. High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications10.1038/nmat1672 ↗
6. A general template-based method for the preparation of nanomaterials10.1039/a700027h ↗
7. 3-D integrated all-solid-state rechargeable batteries10.1002/adma.200702398 ↗
8. A novel method for the fabrication of high-aspect ratio C-MEMS structures10.1109/JMEMS.2004.839312 ↗
9. Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery10.1016/j.jpowsour.2007.10.003 ↗
10. Progress in three-dimensional (3D) Li-ion microbatteries10.1016/j.ssi.2006.02.048 ↗
11. An advanced configuration TiO2/LiFePO4 polymer lithium ion battery10.1016/j.jpowsour.2012.05.071 ↗
12. Electrochemical method for direct deposition of nanometric bismuth and its electrochemical properties vs Li10.1149/1.2826705 ↗
13. Three-dimensional self-supported metal oxides for advanced energy storage10.1002/adma.201306126 ↗
14. Long-length titania nanotubes obtained by high-voltage anodization and high-intensity ultrasonication for superior capacity electrode10.1021/jp3050115 ↗
15. Three-dimensional self-supported metal oxides for advanced energy storage10.1002/adma.201306126 ↗
16. Spaced TiO2 nanotube arrays allow for a high performance hierarchical supercapacitor structure10.1039/C6TA10179H ↗
17. Preparation and capacitance properties of Mn-doped TiO2 nanotube arrays by anodisation of Ti–Mn alloy10.1016/j.jallcom.2015.10.204 ↗
18. Optimized polymer electrolyte membrane fuel cell electrode using TiO2 nanotube arrays with well-defined spacing10.1021/acsanm.0c00325 ↗
19. One-dimensional titanium dioxide nanomaterials: nanotubes10.1021/cr500061m ↗
20. Chapter six - recent advancements in the synthesis, properties, and applications of anodic self-organized TiO2 nanotube layers
21. Porous TiO2-based gas sensors for cyber chemical systems to provide security and medical diagnosis10.3390/s17122947 ↗
22. Formation of titanium oxide nanotube10.1021/la9713816 ↗
23. Formation of a titanium dioxide nanotube array10.1021/la9507803 ↗
24. Fabrication of titania nanofibers by electrospinning10.1021/nl034039o ↗
25. ALD coating of centrifugally spun polymeric fibers and postannealing: case study for nanotubular TiO2 photocatalyst10.1039/D1NA00288K ↗
26. Oxide morphology and adhesive bonding on titanium surfaces10.1007/BF02396935 ↗
27. High-aspect-ratio TiO2 nanotubes by anodization of titanium10.1002/anie.200462459 ↗
28. T.R.B. Foong, Y. Shen, X. Hu, A. Sellinger, Template-directed liquid ALD growth of TiO2 nanotube arrays: properties and potential in photovoltaic devices, 20 (2010) 1390‒1396.10.1002/adfm.200902063 ↗
29. Anodic growth of self-organized anodic TiO2 nanotubes in viscous electrolytes10.1016/j.electacta.2006.07.021 ↗
30. 250 µm long anodic TiO2 nanotubes with hexagonal self-ordering
31. M. Kulkarni, A. Mazare, P. Schmuki, A.J.A.M.L. Igli Influence of anodization parameters on morphology of TiO2 nanostructured surfaces, 7 (2016) 23‒28.10.5185/amlett.2016.6156 ↗
32. TiO2 nanotubular and nanoporous arrays by electrochemical anodization on different substrates10.1039/c1ra00077b ↗
33. Large surface area biphase titania for chemical sensing10.1016/j.snb.2014.12.027 ↗
34. A 1D conical nanotubular TiO2/CdS heterostructure with superior photon-to-electron conversion10.1039/C8NR02418A ↗
35. Heterogeneous photocatalytic treatment of organic dyes in air and aqueous media10.1016/j.jphotochemrev.2008.09.001 ↗
36. Self-organized TiO2 nanotube layers as highly efficient photocatalysts10.1002/smll.200600426 ↗
37. Scaling up anodic TiO2 nanotube layers for gas phase photocatalysis10.1016/j.elecom.2018.10.025 ↗
38. Anodic oxidation of titanium and TA6V alloy in chromic media. An electrochemical approach10.1016/S0013-4686(99)00283-2 ↗
39. Self-organized porous titanium oxide prepared in H2SO4/HF electrolytes10.1149/1.1545192 ↗
40. TiO2 nanotubes: self-organized electrochemical formation, properties and applications10.1016/j.cossms.2007.08.004 ↗
41. Self-organized porous titanium oxide prepared in Na2SO4/NaF electrolytes10.1016/j.electacta.2005.01.014 ↗
42. Titanium oxide nanotubes prepared in phosphate electrolytes10.1016/j.elecom.2005.03.007 ↗
43. Smooth anodic TiO2 nanotubes10.1002/anie.200502781 ↗
44. Chemical modification of TiO2 nanotube arrays for label-free optical biosensing applications10.1016/j.apsusc.2017.05.029 ↗
45. Fabrication and investigation of gas sensing properties of Nb-doped TiO2 nanotubular arrays10.1088/0957-4484/23/23/235706 ↗
46. Galvanostatic anodization of titanium—I. Structures and compositions of the anodic films10.1016/0013-4686(88)80223-8 ↗
47. Ultrafast growth of highly ordered anodic TiO2 nanotubes in lactic acid electrolytes10.1021/ja301892g ↗
48. High aspect ratio TiO2 nanotube layers obtained in a very short anodization time10.1016/j.electacta.2021.138080 ↗
49. Effect of electrolyte age and potential changes on the morphology of TiO2 nanotubes10.1016/j.jelechem.2015.11.002 ↗
50. Investigation of anodic TiO2 nanotube composition with high spatial resolution AES and ToF SIMS10.1016/j.apsusc.2017.10.132 ↗
51. Formation of double-walled TiO2 nanotubes and robust anatase membranes10.1002/adma.200801189 ↗
52. The double-walled nature of TiO2 nanotubes and formation of tube-in-tube structures – a characterization of different tube morphologies10.1016/j.electacta.2017.02.094 ↗
53. Anodic TiO2 nanotubes: double walled vs. single walled10.1039/c3fd00020f ↗
54. Formation of ‘single walled’ TiO2 nanotubes with significantly enhanced electronic properties for higher efficiency dye-sensitized solar cells10.1039/c3cc38793c ↗
55. Optimizing TiO2 nanotube morphology for enhanced photocatalytic H2 evolution using single-walled and highly ordered TiO2 nanotubes decorated with dewetted Au nanoparticles10.1016/j.elecom.2017.04.016 ↗
56. Comparison of photoelectrochemical performance of anodic single- and double-walled TiO2 nanotube layers10.1016/j.elecom.2018.09.015 ↗
57. Anodic TiO2 nanotube walls reconstructed: inner wall replaced by ALD TiO2 coating10.1016/j.apsusc.2021.149306 ↗
58. One-step decoration of TiO2 nanotubes with Fe3O4 nanoparticles: synthesis and photocatalytic and magnetic properties10.1021/acsanm.9b02337 ↗
59. TiO2 nanotubes grown on Ti substrates with different microstructure10.1016/j.materresbull.2018.03.036 ↗
60. Influence of the Ti microstructure on anodic self-organized TiO2 nanotube layers produced in ethylene glycol electrolytes10.1016/j.apsusc.2016.03.012 ↗
61. Vertically oriented TiO2 nanotube arrays grown on Ti meshes for flexible dye-sensitized solar cells10.1021/jp903342s ↗
62. Anatase TiO2 nanotube arrays and titania films on titanium mesh for photocatalytic NOX removal and water cleaning10.1016/j.cattod.2016.10.011 ↗
63. 3D nanoporous titania formed by anodization as a promising photoelectrode material10.1016/j.jelechem.2018.06.014 ↗
64. On wafer TiO2 nanotube-layer formation by anodization of Ti-films on Si10.1016/j.cplett.2006.07.062 ↗
65. TiO2 nanotubes manufactured by anodization of Ti thin films for on-chip Li-ion 2D microbatteries10.1016/j.electacta.2009.02.085 ↗
66. Anodic TiO2 nanotube arrays directly grown on quartz glass used in front- and back-side irradiation configuration for photocatalytic H2 generation10.1002/pssa.201600140 ↗
67. Photoelectrochemical and structural properties of TiO2 nanotubes and nanorods grown on FTO substrate: Comparative study between electrochemical anodization and hydrothermal method used for the nanostructures fabrication10.1016/j.cattod.2016.10.022 ↗
68. Transparent titania nanotubes of micrometer length prepared by anodization of titanium thin film deposited on ITO10.1016/j.apsusc.2011.02.087 ↗
69. Fabrication of different crystallographically oriented TiO2 nanotube arrays used in dye-sensitized solar cells10.1039/C5RA04893A ↗
70. TiO2 nanotubular and nanoporous arrays by electrochemical anodization on different substrates10.1039/c1ra00077b ↗
71. Vertically aligned TiO2 nanotubes on plastic substrates for flexible solar cells10.1002/smll.201101356 ↗
72. Anodization of electrodeposited titanium films towards TiO2 nanotube layers10.1016/j.elecom.2020.106788 ↗
73. The growth and morphology of copper phthalocyanine on TiO2 nanotube arrays10.1016/j.jiec.2012.08.011 ↗
74. Fast and robust infiltration of functional material inside titania nanotube layers: case study of a chalcogenide glass sensitizer10.1039/c3nr03014h ↗
75. One-dimensional anodic TiO2 nanotubes coated by atomic layer deposition: towards advanced applications10.1016/j.apmt.2018.11.005 ↗
76. Highly efficient photoelectrochemical and photocatalytic anodic TiO2 nanotube layers with additional TiO2 coating10.1016/j.apmt.2017.06.002 ↗
77. In2S3 atomic layer deposition and its application as a sensitizer on TiO2 nanotube arrays for solar energy conversion10.1021/jp9086943 ↗
78. ZnO coated anodic 1D TiO2 nanotube layers: efficient photo-electrochemical and gas sensing heterojunction10.1002/adem.201700589 ↗
79. Atomic layer deposition of SnO2-coated anodic one-dimensional TiO2 nanotube layers for low concentration NO2 sensing10.1021/acsami.0c07791 ↗
80. ALD Al2O3-coated TiO2 nanotube layers as anodes for lithium-ion batteries10.1021/acsomega.7b00463 ↗
81. ALD growth of MoS2 nanosheets on TiO2 nanotube supports10.1016/j.flatc.2019.100130 ↗
82. TiO2 nanotube layers decorated with Al2O3/MoS2/Al2O3 as Anode for li-ion microbatteries with enhanced cycling stability10.3390/nano10050953 ↗
83. Thin TiO2 coatings by ALD enhance the cell growth on TiO2 nanotubular and flat substrates10.1021/acsabm.0c00871 ↗
84. Antireflection ln2O3 coatings of self-organized TiO2 nanotube layers prepared by atomic layer deposition10.1002/pssr.201510245 ↗
85. Lithium and lithium ion batteries for applications in microelectronic devices: a review10.1016/j.jpowsour.2015.03.164 ↗
86. Three-dimensional battery architectures10.1021/cr020740l ↗
87. Toward high lithium conduction in solid polymer and polymer–ceramic batteries10.1016/j.coelec.2018.03.033 ↗
88. Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview10.1088/0022-3727/41/22/223001 ↗
89. Inorganic solid Li ion conductors: an overview10.1016/j.ssi.2009.03.022 ↗
90. Ceramic and polymeric solid electrolytes for lithium-ion batteries10.1016/j.jpowsour.2010.01.076 ↗
91. A high-voltage, solid-state battery system10.1149/1.2411560 ↗
92. Thin film solid electrolyte and its application to secondary lithium cell10.1016/0167-2738(83)90192-3 ↗
93. A microfabricated solid-state secondary Li battery10.1016/0167-2738(96)00303-7 ↗
94. Thin-film rechargeable lithium batteries10.1016/0378-7753(94)02040-A ↗
95. Integrable lithium solid-state microbatteries10.1016/0378-7753(89)80189-2 ↗
96. Solid state battery with Li2O-V2O5-SiO2 solid electrolyte thin film10.1016/0167-2738(90)90163-L ↗
97. Latest advances in the manufacturing of 3D rechargeable lithium microbatteries10.1016/j.jpowsour.2015.03.133 ↗
98. Nanoarchitectured 3D cathodes for Li-ion microbatteries10.1002/adma.201001922 ↗
99. High areal energy density 3D lithium-ion microbatteries10.1016/j.joule.2018.04.002 ↗
100. Atomic layer deposition of functional layers for on chip 3D Li-ion all solid state microbattery10.1002/aenm.201601402 ↗