Diazonium chemistry surface treatment of piezoelectric polyhydroxybutyrate scaffolds for enhanced osteoblastic cell growth
Source abstract
Abstract
Abstract Biodegradable piezoelectric 3D polymer scaffolds attract great attention due to possibilities to mimic the functional and mechanical properties of the extracellular matrix, avoiding secondary surgery, and electrically stimulated tissue repair. However, the preservation of piezoelectric response and improvement of wettability of hydrophobic fibrous polymer scaffolds, limiting their application in tissue engineering and regenerative medicine, is a challenge. Here, a facile and mild approach is presented to improve wettability and cell spreading on the surface of piezoelectric polyhydroxybutyrate (PHB) and non-piezoelectric polycaprolactone (PCL) scaffolds. The surface of electrospun 3D fibrous scaffolds was modified by 3,4-dicarboxybenzenediazonium tosylate (ADT-(COOH)2) via photo-induced formation of aryl radicals under ultraviolet irradiation. According to scanning electron microscopy and x-ray diffraction analyses, the intrinsic structure of 3D scaffolds remains unaffected after the treatment. Meanwhile, the attachment of hydrophilic 3,4-dicaboxyphenyl groups to the surface led to an apparent decrease of the water contact angle from 127±4° to 82±1° for PCL and from 126±4° to 78±2° for PHB, i.e. resulting in the change of the scaffold's wettability from hydrophobic to hydrophilic. Furthermore, no aging of the improved wetting was observed for 21 days. The diazonium modification allows to preserve a pronounced piezoelectric response, since PHB scaffolds demonstrate a slightly reduced effective d33 from 2.5 ± 0.3 pC•N−1 to 2.1 ± 0.4 pC•N−1 and surface electric potential from 510±56 mV to 458±25 mV after surface treatment. At the same time, after C6H3-(COOH)2 grafting, osteoblastic cells were well-spread along the PCL and PHB fibrous scaffolds. Moreover, after 7 days of incubation, the cell density is increased on the surface of ADT-(COOH)2-treated fibers in comparison to that on pristine ones, while cells formed a distinct osteoblastic network.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A review of key challenges of electrospun scaffolds for tissue‐engineering applications10.1002/term.1978 ↗
2. Biodegradable and biocompatible polymers for tissue engineering application: a review10.3109/21691401.2016.1146731 ↗
3. A phenomenological model for the degradation of biodegradable polymers10.1016/j.biomaterials.2008.04.042 ↗
4. Development of optimized strategies for growth factors incorporation onto electrospun fibrous scaffolds to promote prolonged release10.1021/acsami.9b20697 ↗
5. Substrate curvature as a cue to guide spatiotemporal cell and tissue organization10.1016/j.biomaterials.2019.119739 ↗
6. Artificial small-diameter blood vessels: materials, fabrication, surface modification, mechanical properties, and bioactive functionalities10.1039/C9TB01849B ↗
7. Electrospun fibrous scaffolds with continuous gradations in mineral contents and biological cues for manipulating cellular behaviors10.1016/j.actbio.2012.01.003 ↗
8. Piezoelectric 3-D fibrous poly (3-hydroxybutyrate)-based scaffolds ultrasound-mineralized with calcium carbonate for bone tissue engineering: inorganic phase formation, osteoblast cell adhesion, and proliferation10.1021/acsami.9b04936 ↗
9. Biomedical applications of polyhydroxyalkanoates, an overview of animal testing and in vivo responses10.1586/17434440.3.6.853 ↗
10. Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment10.1016/j.progpolymsci.2019.05.004 ↗
11. Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings10.1016/j.ijpharm.2017.04.077 ↗
12. Hybrid biodegradable scaffolds of piezoelectric polyhydroxybutyrate and conductive polyaniline: piezocharge constants and electric potential study10.1016/j.matlet.2018.03.022 ↗
13. Strong piezoelectricity in bioinspired peptide nanotubes10.1021/nn901327v ↗
14. Hybrid lead-free polymer-based nanocomposites with improved piezoelectric response for biomedical energy-harvesting applications: a review10.1016/j.nanoen.2019.04.090 ↗
15. Synthesis of magnesium phosphate nanoflakes and its PCL composite electrospun nanofiber scaffolds for bone tissue regeneration10.1016/j.msec.2019.110527 ↗
16. In vivo analysis of vascularization and biocompatibility of electrospun polycaprolactone fibre mats in the rat femur chamber10.1002/term.2868 ↗
17. Effect of surface modification on the in vitro calcium phosphate growth on the surface of poly (methyl methacrylate) and bioactivity10.1016/j.colsurfb.2009.11.012 ↗
18. Low-temperature argon and ammonia plasma treatment of poly-3-hydroxybutyrate films: surface topography and chemistry changes affect fibroblast cells in vitro10.1016/j.eurpolymj.2018.12.040 ↗
19. Cells-Grab-on Particles: a novel approach to control cell focal adhesion on hybrid thermally annealed hydrogels10.1021/acsbiomaterials.0c00119 ↗
20. A comparison study between electrospun polycaprolactone and piezoelectric poly (3-hydroxybutyrate-co-3-hydroxyvalerate) scaffolds for bone tissue engineering10.1016/j.colsurfb.2017.09.004 ↗
21. Composites of amorphous calcium phosphate and poly (hydroxybutyrate) and poly (hydroxybutyrate-co-hydroxyvalerate) for bone substitution: assessment of the biocompatibility10.1007/s10853-006-0023-x ↗
22. Composites of calcium phosphate and polymers as bone substitution materials10.1007/s00068-006-6044-y ↗
23. Surface modification of poly (D, L-lactic acid) scaffolds for orthopedic applications: a biocompatible, nondestructive route via diazonium chemistry10.1021/am502752j ↗
24. Functionalized synthetic biodegradable polymer scaffolds for tissue engineering10.1002/mabi.201100466 ↗
25. Spatially selective modification of PLLA surface: from hydrophobic to hydrophilic or to repellent10.1016/j.apsusc.2016.11.062 ↗
26. Chehimi · 2012
27. Covalent modification of carbon surfaces by aryl radicals generated from the electrochemical reduction of diazonium salts10.1021/ja963354s ↗
28. Photochemical grafting of diazonium salts on metals
29. Effect of lipase treatment on the biocompatibility of microbial polyhydroxyalkanoates
30. Bioinspired growth of crystalline carbonate apatite on biodegradable polymer substrata10.1021/ja012433n ↗
31. Piezoelectric polymers as biomaterials for tissue engineering applications10.1016/j.colsurfb.2015.08.043 ↗
32. Piezoelectric smart biomaterials for bone and cartilage tissue engineering10.1186/s41232-018-0059-8 ↗
33. Piezoelectric materials as stimulatory biomedical materials and scaffolds for bone repair10.1016/j.actbio.2018.04.026 ↗
34. Image processing with ImageJ
35. J. Walton, P. Wincott, N. Fairley, A. Carrick, Peak fitting with CasaXPS: a casa pocket book, 2010.
36. Enhanced piezoelectric response of hybrid biodegradable 3D poly (3-hydroxybutyrate) scaffolds coated with hydrothermally deposited ZnO for biomedical applications10.1016/j.eurpolymj.2019.05.016 ↗
37. Fabrication and characterization of PCL/gelatin/chitosan ternary nanofibrous composite scaffold for tissue engineering applications10.1007/s10853-013-7785-8 ↗
38. Cyanobacterial polyhydroxybutyrate (PHB): screening, optimization and characterization10.1371/journal.pone.0158168 ↗
39. Precise cancer detection via the combination of functionalized SERS surfaces and convolutional neural network with independent inputs10.1016/j.snb.2020.127660 ↗
40. Amelioration of blood compatibility and endothelialization of polycaprolactone substrates by surface-initiated atom transfer radical polymerization
41. Crist · 2000
42. Low pressure plasma treatment of poly (3‐hydroxybutyrate): toward tailored polymer surfaces for tissue engineering scaffolds10.1002/jbm.1274 ↗
43. Carbon, Thermo Scientific XPS. https://xpssimplified.com/elements/carbon.php, (accessed on 10 February 2020).
44. Oxygen, Thermo Scientific XPS. https://xpssimplified.com/elements/oxygen.php, (accessed on 11 February 2020).
45. Smart, piezo-responsive polyvinylidenefluoride/polymethylmethacrylate surface with triggerable water/oil wettability and adhesion10.1021/acsami.8b06840 ↗
46. Improved piezoelectric performances of highly orientated poly (β-hydroxybutyrate) electrospun nanofiber membrane scaffold blended with multiwalled carbon nanotubes10.1016/j.matlet.2019.01.010 ↗
47. Evaluation of metronidazole-loaded poly (3‐hydroxybutyrate) membranes to potential application in periodontitis treatment10.1002/jbm.b.33357 ↗
48. X-ray crystal structure analysis of poly (3-hydroxybutyrate) β-form and the proposition of a mechanism of the stress-induced α-to-β phase transition10.1021/acs.macromol.9b00225 ↗
49. Tagantsev · 2010
50. J.F. Nye, Physical properties of crystals: their representation by tensors and matrices. Oxford university press, 1985.
51. Hierarchy of hybrid materials–the place of inorganics-in-organics in it, their composition and applications10.3389/fchem.2019.00179 ↗
52. Nanostructured biointerfaces based on bioceramic calcium carbonate/hydrogel coatings on titanium with an active enzyme for stimulating osteoblasts growth10.1002/admi.201800452 ↗
53. Adhesion behavior of human bone marrow stromal cells on differentially wettable polymer surfaces10.1089/ten.2006.0062 ↗
54. Charge density is more important than charge polarity in enhancing osteoblast-like cell attachment on poly (ethylene glycol)-diacrylate hydrogel10.1016/j.msec.2017.03.051 ↗
55. Progress in concept and practice of growing anchorage-dependent mammalian cells in three dimension10.1290/1543-706X(2003)039<0187:RICAPO>2.0.CO;2 ↗
56. Modification of silk fibroin using diazonium coupling chemistry and the effects on hMSC proliferation and differentiation10.1016/j.biomaterials.2008.03.039 ↗
57. Surface phosphonation enhances hydroxyapatite coating adhesion on polyetheretherketone and its osseointegration potential10.1016/j.actbio.2016.10.004 ↗