journal article·2021-09

Highly conductive titania supported iridium oxide nanoparticles with low overall iridium density as OER catalyst for large-scale PEM electrolysis

Daniel Böhm, Michael Beetz, Christian Gebauer, Maximilian Bernt, Jonas Schröter, Matthias Kornherr, Florian Zoller, Thomas Bein, Dina Fattakhova-Rohlfing

Publisher page

Abstract

Abstract To enable future large-scale generation of hydrogen via proton exchange membrane (PEM) electrolysis, utilization of scarce iridium-based catalysts required for the oxygen evolution reaction (OER) has to be significantly lowered. To address this question, the facile synthesis of a highly active TiO2 supported iridium oxide based OER catalyst with reduced noble metal content and an Ir-density of the catalyst powder as low as 0.05–0.08 gIr cm-3 is described in this work. A high surface area corrosion-resistant titania catalyst support homogeneously coated with a 1-2 nm thin layer of amorphous IrOOHx is oxidized in molten NaNO3 between 350-375°C. This procedure allows for a controllable phase transformation and crystallization to form a layer of interconnected IrO2 nanoparticles of ≈2 nm on the surface of the TiO2 support. The increase in crystallinity is thereby accompanied by a significant increase in conductivity of up to 11 S cm-1 for a 30 wt% Ir loaded catalyst. Oxidized samples further display a significantly increased stability with less detectable Ir dissolution under OER conditions. With a mass-based activity of 59 A g-1 at an overpotential of 300 mV, the electrocatalytic activity is maintained at the level of the highly active amorphous IrOOHx phase used as precursor and outperforms it at higher current densities through the increased conductivity. MEA measurements with catalyst loadings of 0.2-0.3 mg cm-2 further confirm the high catalytic activity and initial stability at industrially relevant current densities. The introduced synthesis approach therefore shows a path for the fabrication of novel highly active and atom-efficient oxide supported catalysts with complex nanostructures and thin homogenous nanoparticle coatings that allows a future large-scale application of PEM electrolysis technology without restrictions by the natural abundance of iridium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. EU leadership in international climate policy: achievements and challenges10.1080/03932720802280594 ↗
2. The role of large-scale energy storage under high shares of renewable energy10.1002/wene.114 ↗
3. PEM electrolysis for production of hydrogen from renewable energy sources10.1016/j.solener.2004.09.003 ↗
4. Recent advances in cell cost and efficiency for PEM-based water electrolysis10.1149/1.3684798 ↗
5. Current challenges in catalyst development for PEM water electrolyzers10.1002/cite.201900101 ↗
6. Closing the loop for rare metals used in consumer products: opportunities and challenges
7. The rational doping of P and W in multi-stage catalysts to trigger Pt-like electrocatalytic performance10.1039/D0TA08679G ↗
8. Amorphous cobalt phosphate porous nanosheets derived from twodimensional cobalt phosphonate organic frameworks for high performance of oxygen evolution reaction
9. Advances and challenges of Fe-MOFs based materials as electrocatalysts for water splitting
10. Fe-doped CoP core-shell structure with open cages as efficient electrocatalyst for oxygen evolution10.1016/j.jechem.2020.02.031 ↗
11. Anodic oxidation enabled cation leaching for promoting surface reconstruction in water oxidation10.1002/anie.202015060 ↗
12. Activity–stability trends for the oxygen evolution reaction on monometallic oxides in acidic environments10.1021/jz501061n ↗
13. Oxygen evolution activity and stability of iridium in acidic media. Part 2.–Electrochemically grown hydrous iridium oxide10.1016/j.jelechem.2016.05.015 ↗
14. Hemin-mediated construction of iridium oxide with superior stability for the oxygen evolution reaction10.1039/C6TA10097J ↗
15. Iridium–nickel composite oxide catalysts for oxygen evolution reaction in acidic water electrolysis10.1134/S1023193516110124 ↗
16. IrOx core-shell nanocatalysts for cost- and energy-efficient electrochemical water splitting10.1039/C4SC01065E ↗
17. Oxygen evolution in Co-doped RuO2 and IrO2: experimental and theoretical insights to diminish electrolysis overpotential10.1016/j.jpowsour.2014.06.029 ↗
18. Unraveling the beneficial electrochemistry of IrO2/MoO3 hybrid as a highly stable and efficient oxygen evolution reaction catalyst10.1021/acssuschemeng.7b04266 ↗
19. Bismuth iridium oxide oxygen evolution catalyst from hydrothermal synthesis10.1021/cm302468b ↗
20. Composite thin film iridium- niobium oxide Electrocatalysts for the oxygen evolution electrode10.1149/05036.0071ecst ↗
21. Performance of a PEM electrolyzer using RuIrCoOx electrocatalysts for the oxygen evolution electrode10.1016/j.ijhydene.2012.12.071 ↗
22. Fluorine doped (Ir,Sn,Nb)O2 anode electro-catalyst for oxygen evolution via PEM based water electrolysis10.1016/j.ijhydene.2013.10.123 ↗
23. Study of fluorine doped (Nb,Ir)O2 solid solution electro-catalyst powders for proton exchange membrane based oxygen evolution reaction10.1016/j.mseb.2016.06.015 ↗
24. Iridium-based nanowires as highly active, oxygen evolution reaction Electrocatalysts10.1021/acscatal.7b03787 ↗
25. Iridium-Tin oxide solid-solution nanocatalysts with enhanced activity and stability for oxygen evolution10.1016/j.jpowsour.2016.06.004 ↗
26. Oxide-supported Ir nanodendrites with high activity and durability for the oxygen evolution reaction in acid PEM water electrolyzers10.1039/C5SC00518C ↗
27. Iridium oxide dendrite as a highly efficient dual electro-catalyst for water splitting and sensing of H2O210.1149/2.0061705jes ↗
28. Synthesis and oxygen electrocatalysis of iridium oxide Nanosheets10.1007/s12678-016-0348-4 ↗
29. Enhanced electrochemical evolution of oxygen by using nanoflowers made from a gold and iridium oxide composite10.1007/s00604-012-0818-1 ↗
30. Synthesis of Cu-Ir nanocages with enhanced electrocatalytic activity for the oxygen evolution reaction10.1039/C5TA05384F ↗
31. Sputtered iridium oxide films as electrocatalysts for water splitting via PEM electrolysis10.1016/j.electacta.2006.11.005 ↗
32. Iridium oxide coatings with templated porosity as highly active oxygen evolution catalysts: structure-activity relationships10.1002/cssc.201402988 ↗
33. Mesoporous IrO2 films Templated by PEO-PB-PEO block-copolymers: self-assembly, crystallization behavior, and electrocatalytic performance10.1021/cm200761f ↗
34. Triblock polymer mediated synthesis of Ir–Sn oxide electrocatalysts for oxygen evolution reaction10.1016/j.jpowsour.2013.10.088 ↗
35. Nanosized IrOx and IrRuOx electrocatalysts for the O2 evolution reaction in PEM water electrolysers10.1016/j.apcatb.2014.09.005 ↗
36. Efficient OER catalyst with low ir volume density obtained by homogeneous deposition of iridium oxide nanoparticles on macroporous antimony-doped tin oxide support
37. Pathways to ultra-low platinum group metal catalyst loading in proton exchange membrane electrolyzers10.1016/j.cattod.2015.10.019 ↗
38. Oxide-supported IrNiOx core–shell particles as efficient, cost-effective, and stable catalysts for electrochemical water splitting10.1002/ange.201411072 ↗
39. Physical and electrochemical evaluation of ATO supported IrO2 catalyst for proton exchange membrane water electrolyser10.1016/j.jpowsour.2014.06.078 ↗
40. Preparation of mesoporous Sb-, F-, and In-Doped SnO2 bulk powder with high surface area for use as catalyst supports in electrolytic cells10.1002/adfm.201401919 ↗
41. Investigation of supported IrO2 as electrocatalyst for the oxygen evolution reaction in proton exchange membrane water electrolyser10.1016/j.ijhydene.2013.11.056 ↗
42. Self-assembly of active IrO2 colloid catalyst on an ITO electrode for efficient electrochemical water oxidation10.1021/jp0550208 ↗
43. Metal carbide and oxide supports for iridium-based oxygen evolution reaction electrocatalysts for polymer-electrolyte-membrane water electrolysis10.1016/j.electacta.2017.06.048 ↗
44. Performance of a PEM water electrolyser using a TaC-supported iridium oxide electrocatalyst10.1016/j.ijhydene.2013.12.085 ↗
45. Stability limits of tin-based electrocatalyst supports10.1038/s41598-017-04079-9 ↗
46. Electrocatalysis: understanding the success of DSA®10.1016/S0013-4686(00)00338-8 ↗
47. Electrocatalytic oxygen evolution reaction on iridium oxide model film catalysts: influence of oxide type and catalyst substrate interactions10.1149/05802.0039ecst ↗
48. Electrocatalytic oxygen evolution on iridium oxide: uncovering catalyst-substrate interactions and active iridium oxide species10.1149/2.0411409jes ↗
49. Non-conductive TiO2 as the anode catalyst support for PEM water electrolysis10.1016/j.ijhydene.2012.05.129 ↗
50. IrO2-TiO2: a high-surface-area, active, and stable electrocatalyst for the oxygen evolution reaction10.1021/acscatal.6b03246 ↗
51. Simultaneous co-doping of RuO2 and IrO2 into anodic TiO2 nanotubes: a binary catalyst for electrochemical water splitting10.1016/j.ijhydene.2016.12.018 ↗
52. Investigation of V-doped TiO2 as an anodic catalyst support for SPE water electrolysis10.1016/j.ijhydene.2017.02.131 ↗
53. Carbon-templated conductive oxide supports for oxygen evolution catalysis10.1039/C9NR03013A ↗
54. IrO2/Nb–TiO2 electrocatalyst for oxygen evolution reaction in acidic medium10.1016/j.ijhydene.2014.02.114 ↗
55. PI, H. X.; Newton, M., High-Performance, Long-Lifetime Catalysts for Proton Exchange Membrane Electrolysis. NREL project report PD103 2015.
56. Towards stable and conductive titanium oxynitride high-surface-area support for iridium nanoparticles as oxygen evolution reaction electrocatalyst10.1002/cctc.201901487 ↗
57. Investigation on IrO2 supported on hydrogenated TiO2 nanotube array as OER electro-catalyst for water electrolysis10.1016/j.ijhydene.2016.12.098 ↗
58. Preparation and characterization of titanium suboxides as conductive supports of IrO2 electrocatalysts for application in SPE electrolysers10.1016/j.electacta.2009.05.094 ↗
59. Oxygen evolution catalysts based on Ir–Ti Mixed oxides with templated Mesopore structure: impact of ir on activity and conductivity10.1002/cssc.201800932 ↗
60. Tailored mesoporous Ir/TiOx: Identification of structure-activity relationships for an efficient oxygen evolution reaction10.1016/j.jcat.2019.06.044 ↗
61. A simple one-pot Adams method route to conductive high surface area IrO2–TiO2 materials10.1039/C5NJ02400E ↗
62. Influence of ionomer content in IrO2/TiO2 electrodes on PEM water electrolyzer performance10.1149/2.0231611jes ↗
63. Lopez, M.; Schleunung, A.; Biberbach, P., Precious metal oxide catalyst for water electrolysis. (Umicore AG) U.S. 7,976,989B2, 2004
64. Activity and stability of electrochemically and thermally treated iridium for the oxygen evolution reaction10.1149/2.0181611jes ↗
65. Voltammetric and galvanostatic studies of hydrous and anhydrous iridium oxide films10.1007/BF01019573 ↗
66. Oxygen evolution reaction on thermally treated iridium oxide films10.1007/BF01007809 ↗
67. Iridium Oxide for the oxygen evolution reaction: correlation between particle size, morphology, and the surface Hydroxo layer from operando XAS10.1021/acs.chemmater.6b02625 ↗
68. Nanosized IrO2 electrocatalysts for oxygen evolution reaction in an SPE electrolyzer10.1007/s11051-010-9917-2 ↗
69. Raman spectra of titanium dioxide10.1016/0022-4596(82)90006-8 ↗
70. Raman scattering characterization of well-aligned RuO2 and IrO2 nanocrystals10.1002/jrs.1655 ↗
71. Raman spectrum of IrO210.1016/0038-1098(89)90942-3 ↗
72. Operando X-ray characterization of high surface area iridium oxides to decouple their activity losses for the oxygen evolution reaction10.1039/C9EE01018A ↗
73. Ex-Situ electrochemical characterization of IrO2 synthesized by a modified adams fusion method for the oxygen evolution reaction10.3390/catal9040318 ↗
74. The Scherrer formula for X-Ray particle size determination10.1103/PhysRev.56.978 ↗
75. Effect of heating rates and composition on the thermal decomposition of nitrate based molten salts10.1016/j.egypro.2015.03.075 ↗
76. The thermal decomposition of sodium nitrate and the effects of several oxides on the decomposition10.1246/bcsj.54.1385 ↗
77. Guire · 2004
78. A new interpretation of the charge storage and electrical conductivity behaviour of hydrous iridium oxide10.1016/S0022-0728(81)80313-0 ↗
79. Proton and electron conductivity in hydrous ruthenium oxides evaluated by electrochemical impedance spectroscopy: the origin of large capacitance10.1021/jp044252o ↗
80. Impedance of hydrated iridium oxide electrodes10.1016/0013-4686(89)87112-9 ↗
81. Electronic structure of IrO2: the role of the metal d orbitals10.1021/acs.jpcc.5b00861 ↗
82. Electronic Conductivity of Films of Electroflocculated 2 nm Iridium Oxide Nanoparticles10.1021/ja413226j ↗
83. Effect of electronic conductivities of iridium oxide/Doped SnO2 oxygen-evolving catalysts on the polarization properties in proton exchange membrane water electrolysis10.3390/catal9010074 ↗
84. Ultrathin IrO2 nanoneedles for electrochemical water oxidation10.1002/adfm.201704796 ↗
85. Electrochemical comparison of IrO2 prepared by anodic oxidation of pure iridium and IrO2 prepared by thermal decomposition of H2IrCl6 precursor solution10.1007/s10800-009-9809-2 ↗
86. Iridium anodic oxidation to Ir(III) and Ir(IV) hydrous oxides10.1002/elan.200403200 ↗
87. Self-supported hydrous iridium–nickel oxide two-dimensional nanoframes for high activity oxygen evolution electrocatalysts10.1021/acscatal.8b02171 ↗
88. Calcination temperature dependent catalytic activity and stability of IrO2 –Ta2O5 anodes for oxygen evolution reaction in aqueous sulfate electrolytes10.1149/2.0061710jes ↗
89. Observing the oxidation state turnover in heterogeneous iridium-based water oxidation catalysts10.1039/C4SC00975D ↗
90. Analysis of voltage losses in PEM water electrolyzers with low platinum group metal loadings10.1149/2.0641805jes ↗
91. M. Bernt, C. Schramm, J. Schröter, C. Gebauer, J. Byrkness, C. Eickes, H.A. Gasteiger; Effect of the IrOx Conductivity on the Anode Electrode/Porous Transport Layer Interfacial Resistance in PEM Water Electrolyzers. manuscript to be submitted.
92. Platinum oxide as a catalyst in the reduction of organic compounds. III. Preparation and properties of the oxide of platinum obtained by the fusion of chloroplatinic acid with sodium nitrate10.1021/ja01662a022 ↗