The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing
Source abstract
Abstract
Abstract During laser powder bed fusion additive manufacturing, laser power absorption is governed by a protean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their instantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we focus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser absorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 µs due to a dramatic change in the vapor depression aspect ratio – an event known to create porosity. As several industrial scan strategies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addition to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. On the approximation of black bodies which are employed as receivers
2. Corrections d'ouverture des corps noirs artificiels compte tenu des diffusions multiples internes
3. Radiant emission characteristics of diffuse conical cavities10.1364/JOSA.53.000816 ↗
4. Spectral-absorptance measurements for laser calorimetry10.1364/JOSA.65.000573 ↗
5. Penetration welding with lasers
6. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing10.1016/j.jmatprotec.2014.06.005 ↗
7. Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging10.1126/science.aav4687 ↗
8. Energy-Beam redistribution and absorption in a drilling or welding cavity10.1007/BF02649669 ↗
9. A study of the effect of multiple reflections on the shape of the keyhole in the laser processing of materials10.1088/0022-3727/30/23/006 ↗
10. Energy absorption in a conical cavity truncated by spherical cap subject to a focused high-intensity beam10.1016/S0017-9310(96)00223-2 ↗
11. Effect of laser-matter interaction on molten pool flow and keyhole dynamics10.1103/PhysRevApplied.11.064054 ↗
12. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing10.1126/science.aay7830 ↗
13. Geometry and absorptance of the cutting fronts during laser beam cutting Geometry and absorptance of the cutting fronts during laser beam cutting10.2351/7.0000024 ↗
14. Keyhole-induced porosities in laser-based powder bed fusion (L-PBF) of Ti6Al4V: high-fidelity modelling and experimental validation
15. Revealing internal flow behaviour in arc welding and additive manufacturing of metals10.1038/s41467-018-07900-9 ↗
16. Geometry and stability of the capillary during deep-penetration laser welding of AlMgSi at high feed rates
17. Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction10.1038/s41598-017-03761-2 ↗
18. Ultrafast X-ray imaging of laser – metal additive manufacturing processes10.1107/S1600577518009554 ↗
19. Study of dynamic absorptivity at 10.6 µm (CO2) and 1.06 µm (Nd-YAG) wavelengths as a function of temperature
20. Development of a time-resolved energy absorption measurement technique for laser beam spot welds
21. Time-resolved absorptance and melt pool dynamics during intense laser irradiation of metal10.1103/PhysRevApplied.10.044061 ↗
22. Dynamic laser absorptance measured in a geometrically characterized stainless-steel powder layer10.1103/PhysRevApplied.13.024057 ↗
23. Investigation of keyhole plume and molten pool based on a three-dimensional dynamic model with sharp interface formulation10.1088/0022-3727/46/5/055501 ↗
24. Energy coupling mechanisms and scaling behavior associated with laser powder bed fusion additive manufacturing
25. Review of in situ process monitoring and in situ metrology for metal additive manufacturing10.1016/j.matdes.2016.01.099 ↗
26. In-process sensing in selective laser melting (SLM) additive manufacturing10.1186/s40192-016-0045-4 ↗
27. A review on process monitoring and control in metal-based additive manufacturing
28. In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system10.1007/s00170-014-6214-8 ↗
29. Linking pyrometry to porosity in additively manufactured metals
30. Bulk-explosion-induced metal spattering during laser processing
31. International journal of machine tools and manufacture direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding10.1016/j.ijmachtools.2020.103555 ↗
32. Supervised deep learning for real- time quality monitoring of laser welding with X-ray radiographic guidance10.1038/s41598-020-60294-x ↗
33. Analysis of the keyhole and weld pool dynamics by imaging evaluation and photodiode monitoring
34. Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: a correlation between in situ pyrometry and ex situ X-ray radiography
35. Sensing defects during directed-energy additive manufacturing of metal parts using optical emissions spectroscopy
36. Time-resolved detection of vaporization during laser metal processing with laser-induced fluorescence10.1016/j.procir.2018.08.072 ↗
37. The role of additive manufacturing in the era of industry 4.0
38. A digital twin for rapid qualification of 3D printed metallic components10.1016/j.apmt.2018.11.003 ↗
39. Standard Reference Material (SRM) 654b, Titanium Alloy, Al-V, (National Institute of Standards and Technology; U.S. Department of Commerce, Gaithersburg, MD, 2013).
40. Certain commercial equipment, software, and/or materials are identified in this paper in order to adequately specify the experimental procedure. In no case does such identification imply recommendation or endorsement by the National Institute of Standards.
41. Simultaneous high-speed x-ray transmission imaging and absolute dynamic absorptance measurements during high-power laser-metal processing10.1016/j.procir.2020.09.135 ↗
42. Energy-coupling mechanisms revealed through simultaneous keyhole depth and absorptance measurements during laser-metal processing10.1103/PhysRevApplied.13.064070 ↗
43. In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing10.1016/j.apmt.2017.08.006 ↗
44. Depth dependence and keyhole stability at threshold, for different laser welding regimes10.3390/app10041487 ↗
45. Sensitivity of Marangoni convection and weld shape variations to welding parameters in O2-Ar shielded GTA welding10.1016/j.scriptamat.2004.03.004 ↗
46. The effect of powder oxidation on defect formation in laser additive manufacturing10.1016/j.actamat.2018.12.027 ↗
47. Temperature-dependent absorptance of painted aluminum, stainless steel 304, and titanium for 1.07 um and 10.6 um laser beams10.1016/j.optlaseng.2011.10.001 ↗
48. Dynamics of pore formation during laser powder bed fusion additive manufacturing10.1038/s41467-019-10009-2 ↗
49. Model of radiation and heat transfer in laser-powder interaction zone at selective laser melting10.1115/1.3109245 ↗
50. Modelling of radiation transfer in metallic powders at laser treatment10.1016/j.ijheatmasstransfer.2005.01.044 ↗
51. Experimental study of the dynamical coupling between the induced vapour plume and the melt pool for Nd-Yag CW laser welding10.1088/0022-3727/39/2/023 ↗
52. Melt pool and keyhole behaviour analysis for deep penetration laser welding
53. Scaling laws for the additive manufacturing10.1016/j.jmatprotec.2018.02.034 ↗
54. Measurement and prediction of efficiency in laser beam energy transfer welding
55. Simultaneous in operando monitoring of keyhole depth and absorptance in laser processing of AISI 316 stainless steel at 200 kHz10.1016/j.procir.2020.09.157 ↗
56. Transient Laser Energy Absorption, Co-axial Melt Pool Monitoring, and Relationship to Melt Pool Morphology