Damage Mechanism and Reusability Assessment of 2D C/SiC T-Joint Structure Under Typical Loading
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Sippel, M., Stappert, S., Koch, A.: Assessment of multiple mission reusable launch vehicles. J. Space Saf. Eng. 6, 165–180 (2019)10.1016/j.jsse.2019.09.001 ↗
2. Seedhouse, E.: Dragon design, development, and test. In: Seedhouse, E. (ed.) Spacex’s Dragon: America’s Next Generation Spacecraft, pp. 23–44. Springer International Publishing, Cham (2016)10.1007/978-3-319-21515-0_3 ↗
3. Dumbacher, D.L.: X-37 flight demonstrator project: capabilities for future space transportation system development. In: Proceedings of the 55th International Astronautical Congress, Vancouver, Canada, 4–8 October 2004. Paper IAC-04-V.6.05. American Institute of Aeronautics and Astronautics, Reston, VA (2004)
4. Rasky, D.J., Pittman, B., Newfield, M.: The reusable launch vehicle challenge. In: AIAA SPACE 2006 Conference & Exposition, San Jose, CA, 19–21 September 2006. Paper AIAA 2006-7208. American Institute of Aeronautics and Astronautics, Reston, VA (2006)10.2514/6.2006-7208 ↗
5. Baiocco, P.: Overview of reusable space systems with a look to technology aspects. Acta Astronaut. 189, 10–25 (2021)10.1016/j.actaastro.2021.07.039 ↗
6. Yu, K., Wu, W., Su, L., Ma, X.: Research on reusable technology system for new-generation manned spaceships. Adv. Astronaut. Sci. Technol. 7, 79–86 (2024)10.1007/s42423-024-00157-z ↗
7. Sengupta, P., Manna, I.: Advanced high-temperature structural materials for aerospace and power sectors: a critical review. Trans. Indian Inst. Met. 72, 2043–2059 (2019)10.1007/s12666-019-01598-z ↗
8. Balesdent, M., Brevault, L., Paluch, B., Thépot, R., Wuilbercq, R., Subra, N., et al.: Multidisciplinary design and optimization of winged architectures for reusable launch vehicles. Acta Astronaut. 211, 97–115 (2023)10.1016/j.actaastro.2023.05.041 ↗
9. Shaikh, A., Nithin Kumar, K.C., Avikal, S., Harshit, Chavadaki, S.: Weight optimization of metal T stiffened panel of a transport aircraft wing using CAE tools. Mater. Today Proc. 26, 1650–1653 (2020)10.1016/j.matpr.2020.02.344 ↗
10. He, Z., Chen, B., Zhang, Y., Liu, Y., Zhang, L.: Mechanical behavior of C/SiC T-section under pulling load. J. Mater. Sci. Technol. 35, 2950–2956 (2019)10.1016/j.jmst.2019.04.040 ↗
11. Schmidt, S., Beyer, S., Knabe, H., Immich, H., Meistring, R., Gessler, A.: Advanced ceramic matrix composite materials for current and future propulsion technology applications. Acta Astronaut. 55, 409–420 (2004)10.1016/j.actaastro.2004.05.052 ↗
12. Krenkel, W., Berndt, F.: C/C–SiC composites for space applications and advanced friction systems. Mater. Sci. Eng. A. 412, 177–181 (2005)10.1016/j.msea.2005.08.204 ↗
13. Zhang, Q., Li, G.: A review of the application of C/SiC composite in thermal protection system. Multidiscip Model. Mater. Struct. 5, 199–203 (2009)10.1163/157361109787959903 ↗
14. Glass, D.: Ceramic matrix composite (CMC) thermal protection systems (TPS) and hot structures for hypersonic vehicles. 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Dayton, Ohio: American Institute of Aeronautics and Astronautics; (2008)10.2514/6.2008-2682 ↗
15. Gülaşık, H.: Modeling of mixed-mode delamination in composite t-joints. Master thesis. Middle East Technical University, (2014)
16. Li, Y., Xiao, P., Luo, H., Almeida, R.S.M., Li, Z., Zhou, W., et al.: Fatigue behavior and residual strength evolution of 2.5D C/C-SiC composites. J. Eur. Ceram. Soc. 36, 3977–3985 (2016)10.1016/j.jeurceramsoc.2016.07.009 ↗
17. Wang, M., Laird, C.: Tension-tension fatigue of a cross-woven C/SiC composite. Mater. Sci. Eng. A. 230, 171–182 (1997)10.1016/S0921-5093(97)00018-X ↗
18. Yu, J., Fei, Q., Zhang, P., Li, Y., Chen, Q.: Fatigue life of a 2.5D C/SiC composite under tension–tension cyclic loading: experimental investigation and sensitivity analysis. Acta Mech. Solida Sin. 34, 645–657 (2021)10.1007/s10338-021-00228-w ↗
19. Liu, Y., Li, L., Zhang, Z., Xiong, X.: Monotonic and cyclic loading/unloading tensile behavior of 3D needle-punched C/SiC ceramic-matrix composites. Mater. (Basel Switz). 14, 57 (2020)10.3390/ma14010057 ↗
20. Liu, Y., Li, L., Zhang, Z., Wang, Y.: Micromechanical modeling cyclic loading/unloading hysteresis loops of 3D needle-punched C/SiC ceramic-matrix composites. Compos. Interfaces. 29, 1121–1144 (2022)10.1080/09276440.2021.1926193 ↗
21. Huo, Y., Yang, Q., Chen, S., Meng, S., Zhao, J., Jiang, J.: Modeling and experimental study on electrical impedance response to damage accumulation in 2D C/SiC composites. J. Eur. Ceram. Soc. 42, 4144–4153 (2022)10.1016/j.jeurceramsoc.2022.04.001 ↗
22. Thermo-mechanical fatigue: failure mechanisms and probabilistic fatigue life assessment of C/SiC composites based on GM-bootstrap method. Mater. Today Commun. 44, 112118 (2025)10.1016/j.mtcomm.2025.112118 ↗
23. He, Z., Zhang, L., Chen, B., Liu, Y., Liu, X.: Failure behavior of 2D C/SiC I-beam under bending load. Compos. Struct. 132, 321–330 (2015)10.1016/j.compstruct.2015.04.066 ↗
24. Trask, R.S., Hallett, S.R., Helenon, F.M.M., Wisnom, M.R.: Influence of process induced defects on the failure of composite T-joint specimens. Compos. Part. A. 43, 748–757 (2012)10.1016/j.compositesa.2011.12.021 ↗
25. Guo, S., Li, W.: Numerical analysis and experiment of sandwich T-joint structure reinforced by composite fasteners. Compos. Part. B. 199, 108288 (2020)10.1016/j.compositesb.2020.108288 ↗
26. Hou, G., Shang, D.-G., Zuo, L.-X., Qu, L.-F., Guo, Y.-E., Xia, M., et al.: Fatigue damage identification of SiC coated needled C/SiC composite by acoustic emission. Ceram. Int. 47, 15129–15138 (2021)10.1016/j.ceramint.2021.02.071 ↗
27. Mei, H., Cheng, L., Zhang, L.: Damage mechanisms of C/SiC composites subjected to constant load and thermal cycling in oxidizing atmosphere. Scr. Mater. 54, 163–168 (2006)10.1016/j.scriptamat.2005.09.044 ↗
28. Fatigue behavior and damage: analysis of PIP C/SiC composite. J. Eur. Ceram. Soc. 42, 5391–5398 (2022)10.1016/j.jeurceramsoc.2022.06.053 ↗
29. Grantz, A.: X-37B orbital test vehicle and derivatives. AIAA SPACE 2011 Conference & Exposition, American Institute of Aeronautics and Astronautics; (2011)10.2514/6.2011-7315 ↗
30. Yang, Q., Xu, C., Xie, W., Meng, S., Jin, H.: The damage-induced bi-modulus characteristic of C/SiC materials and experimental validation. Ceram. Int. 43, 9171–9177 (2017)10.1016/j.ceramint.2017.04.068 ↗
31. Wang, P., Yang, Q., Gao, B., Yi, F., Meng, S.: Quantification method for extrapolation errors of constitutive models and a demonstration on C/SiC composite. Compos. Struct. 273, 114286 (2021)10.1016/j.compstruct.2021.114286 ↗
32. Yang, Q., Xu, C., Cheng, G., Meng, S., Xie, W.: Uncertainty quantification method for mechanical behavior of C/SiC composite and its experimental validation. Compos. Struct. 230, 111516 (2019)10.1016/j.compstruct.2019.111516 ↗
33. Deng, Y., Hao, Y., Wang, H., Li, W., Qin, Q., Pan, B., et al.: Effect of temperature and atmosphere on the fracture toughness and failure mechanisms of two-dimensional plain-woven SiCf/SiC composites: experiments and modeling. Acta Mech. Sin. 41, 124333 (2025)10.1007/s10409-024-24333-x ↗
34. Krenkel, W.: Carbon fiber reinforced CMC for high-performance structures. Int. J. Appl. Ceram. Technol. 1, 188–200 (2004)10.1111/j.1744-7402.2004.tb00169.x ↗
35. Hoffman, O.: The brittle strength of orthotropic materials. J. Compos. Mater. 1, 200–206 (1967)10.1177/002199836700100210 ↗
36. Mei, H., Cheng, L.: Stress-dependence and time-dependence of the post-fatigue tensile behavior of carbon fiber reinforced SiC matrix composites. Compos. Sci. Technol. 71, 1404–1409 (2011)10.1016/j.compscitech.2011.05.013 ↗
37. Zhu, S., Mizuno, M., Kagawa, Y., Mutoh, Y.: Monotonic tension, fatigue and creep behavior of SiC-fiber-reinforced SiC-matrix composites: a review. Compos. Sci. Technol. 59, 833–851 (1999)10.1016/S0266-3538(99)00014-7 ↗
38. Li, Y., Xiao, P., Li, Z., Zhou, W., Liensdorf, T., Freudenberg, W., et al.: Tensile fatigue behavior of plain-weave reinforced Cf/C–SiC composites. Ceram. Int. 42, 6850–6857 (2016)10.1016/j.ceramint.2016.01.068 ↗
39. Morales-Rodríguez, A., Moevus, M., Reynaud, P., Fantozzi, G.: Strength enhancement of 2D-SiCf/SiC composites after static fatigue at room temperature. J. Eur. Ceram. Soc. 27, 3301–3305 (2007)10.1016/j.jeurceramsoc.2007.02.180 ↗
40. Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta Metall. Mater. 43, 859–875 (1995)10.1016/0956-7151(94)00304-Z ↗