Modeling Study on the Mechanical Properties of CFRP Joint Under Hygrothermal Conditions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Health Monitoring Techniques · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Kolanu, N.R., Raju, G., Ramji, M.: Damage assessment studies in CFRP composite laminate with cut-out subjected to in-plane shear loading [J]. Compos. Part. B-Eng. 166, 257 – 71 (2019)10.1016/j.compositesb.2018.11.142 ↗
2. Liu, P.F., Zheng, J.Y.: Recent developments on damage modeling and finite element analysis for composite laminates: A review [J]. Mater. Design. 31(8), 3825–3834 (2010)10.1016/j.matdes.2010.03.031 ↗
3. Hamzat, A.K., Murad, M.S., Adediran, I.A., et al.: Fiber-reinforced composites for aerospace, energy, and marine applications: an insight into failure mechanisms under chemical, thermal, oxidative, and mechanical load conditions. Adv. Compos. Hybrid. Mater. 8, 152 (2025)10.1007/s42114-024-01192-y ↗
4. Malekinejad, H., et al.: Enhancing fatigue life and strength of adhesively bonded composite joints: A comprehensive review. Mater. (Basel) 16(19), 6468 (2023)10.3390/ma16196468 ↗
5. Malekinejad, H., et al.: Experimental investigation of bio-inspired Bouligand-type CFRP adherends in adhesive joints under multi-rate and multi-directional tensile loading. Int. J. Adhes. Adhes. 104170 (2025)10.1016/j.ijadhadh.2025.104170 ↗
6. Malekinejad, H., et al.: Performance of hybrid reinforced composite substrates in adhesively bonded joints under varied loading rates. Polym. (Basel) 17(4), 469 (2025)10.3390/polym17040469 ↗
7. Xu, G., Cheng, H., Zhang, K., et al.: Modeling of damage behavior of carbon fiber reinforced plastic composites interference bolting with sleeve [J]. Mater. Des. 194, 108904 (2020)10.1016/j.matdes.2020.108904 ↗
8. Zain, et al.: Classification of progressive failure and mechanical behavior of dissimilar material hybrid joints at varying temperatures. Thin-Walled Struct. 182, 110212 (2023)10.1016/j.tws.2022.110212 ↗
9. Khan, S.A., et al.: Investigation of the mechanical behavior of FDM processed CFRP/Al hybrid joint at elevated temperatures. Thin-Walled Struct. 192, 111135 (2023)10.1016/j.tws.2023.111135 ↗
10. Nazim, M., et al.: Design, Development, and Performance Evaluation of FDM-Based Fastening Techniques for Single-Lap Joints. Jom. 76(2), 930–940 (2023)10.1007/s11837-023-06324-1 ↗
11. Ahmad Khan, S., et al.: Development of a design space for dissimilar materials joining in aerospace applications. Aeronaut [J]. 128(1324), 1284–1301(2023)
12. Thomason, J.: The interface region in glass fibre-reinforced epoxy resin composites: 2. Water absorption, voids and the interface [J]. Composites. 26(7), 477–85 (1995)10.1016/0010-4361(95)96805-G ↗
13. Costa, M.L., Rezende, M.C., De Almeida, S.F.M.: Effect of void content on the moisture absorption in polymeric composites [J]. Polym.-Plast. Technol. Eng. 45(6), 691–698 (2006)10.1080/03602550600609549 ↗
14. Joliff, Y., Rekik, W., Bélec, L., et al.: Study of the moisture/stress effects on glass fibre/epoxy composite and the impact of the interphase area [J]. Compos. Struct. 108, 876–85 (2014)10.1016/j.compstruct.2013.10.001 ↗
15. Jiang, X., Kolstein, H., Bijlaard, F., et al.: Effects of hygrothermal aging on glass-fibre reinforced polymer laminates and adhesive of FRP composite bridge: Moisture diffusion characteristics [J]. Compos. Part A: Appl. Sci. Manufac. 57, 49–58 (2014)10.1016/j.compositesa.2013.11.002 ↗
16. Kondo, K., Taki, T.: Moisture diffusivity of unidirectional composites [J]. J. Compos. Mater. 16(2), 82–93 (1982)10.1177/002199838201600201 ↗
17. Wallace, W.E., Van Zanten, J.H., Wu, W.: Influence of an impenetrable interface on a polymer glass-transition temperature [J]. Phys. Rev. E. 52(4), R3329 (1995)10.1103/PhysRevE.52.R3329 ↗
18. Van Zanten, J.H., Wallace, W.E., Wu, W.L.: .:Effect of strongly favorable substrate interactions on the thermal properties of ultrathin polymer films [J]. Phys. Rev. E. 53(3), R2053 (1996)10.1103/PhysRevE.53.R2053 ↗
19. Lin, E.K., Wu, W.-L., Satija, S.K.: Polymer interdiffusion near an attractive solid substrate [J]. Macromolecules. 30(23), 7224–7231 (1997)10.1021/ma9704424 ↗
20. Demaggio, G., Frieze, W., Gidley, D., et al.: Interface and surface effects on the glass transition in thin polystyrene films [J]. Phys. Rev. Lett. 78(8), 1524 (1997)10.1103/PhysRevLett.78.1524 ↗
21. Sugita, S., Awaki, H., Kurihara, D., et al.: Studies of the moisture absorption of thin carbon fiber reinforced plastic substrates for x-ray mirrors [J]. J. Astron. Telescopes Instruments Syst. 1(3), 034003 (2015)10.1117/1.JATIS.1.3.034003 ↗
22. Chandrasekar, M., Ishak, M., Jawaid, M., et al.: An experimental review on the mechanical properties and hygrothermal behaviour of fibre metal laminates [J]. J. Reinf. Plast. Compos. 36(1), 72–82 (2017)10.1177/0731684416668260 ↗
23. Botelho, E., Almeida, R., Pardini, L., et al.: Influence of hygrothermal conditioning on the elastic properties of Carall laminates [J]. Appl. Compos. Mater. 14, 209–22 (2007)10.1007/s10443-007-9041-3 ↗
24. Y, Liu, J., Lin., H., Wang, et al.: Degradation and strength prediction of CFRP under hygrothermal-mechanical coupling environment[J]. Polym. Compos. (2026)
25. Li, F., et al.: Effect of high temperature and hygrothermal aging on interlaminar mechanical properties of carbon fiber reinforced plastics. Polym. Compos. 46, S463–S479 (2025)10.1002/pc.29852 ↗
26. Karimi, S., et al.: An experimental investigation on the influence of environmental ageing on strength and fatigue behavior of different single lap joints. Compos. Struct. 322, 117423 (2023)10.1016/j.compstruct.2023.117423 ↗
27. Karimi, S.: Investigating the durability of nano-reinforced CFRP‐aluminum and CFRP‐CFRP bonded and bonded/bolted joints under hygrothermal conditions. Polym. Compos. 46(5), 4075–4095 (2024)10.1002/pc.29225 ↗
28. Karimi, S.: Utilizing a combination of experimental and machine learning methods to predict and correlate between accelerated and natural aging of CFRP/AL adhesive joints under hygrothermal conditions. Polym. Compos. 46(5), 4096–4111 (2024)10.1002/pc.29226 ↗
29. Bai, J.-B., et al.: Experimental and numerical investigation on thermomechanical behavior of diverse plain-woven CFRP bolted joint configurations. Thin-Walled Struct. 114155 (2026)10.1016/j.tws.2025.114155 ↗
30. Wei, Y., et al.: On impact response and damage tolerance of adhesively bonded joints–An experimental and numerical study. Thin-Walled Struct. 208, 112606 (2025)10.1016/j.tws.2024.112606 ↗
31. Osa-uwagboe, N., et al.: Effects of moisture absorption on penetration performance of FRP sandwich structures. Compos. Struct. 344, 118319 (2024)10.1016/j.compstruct.2024.118319 ↗
32. Osa-uwagboe, N., Silberschmidt, V.V.: Review on Mechanical Performance of Fibre-Reinforced Plastics in Marine Environments. Appl. Compos. Mater. 31(6), 1991–2018 (2024)10.1007/s10443-024-10247-8 ↗
33. Russo, A., Palumbo, C.: The role of intralaminar damages on the delamination evolution in laminated composite structures. Heliyon 9(4), e15060 (2023)10.1016/j.heliyon.2023.e15060 ↗
34. Russo, A., et al.: A robust numerical methodology for fatigue damage evolution simulation in composites. Materials 14(12), 3348 (2021)10.3390/ma14123348 ↗
35. Russo, A., et al.: Cross-influence between intra-laminar damages and fibre bridging at the skin-stringer interface in stiffened composite panels under compression. Mater. (Basel) 12(11), 1856 (2019)10.3390/ma12111856 ↗
36. Li, M., Zhang, H., Li, S., et al.: Machine learning and materials informatics approaches for predicting transverse mechanical properties of unidirectional CFRP composites with microvoids [J]. Mater. Des. 224, 111340 (2022)10.1016/j.matdes.2022.111340 ↗
37. Tiryaki, S., Aydin, A.: An artificial neural network model for predicting compression strength of heat-treated woods and comparison with a multiple linear regression model [J]. Constr. Build. Mater. 62, 102–8 (2014)10.1016/j.conbuildmat.2014.03.041 ↗
38. Khademi, F., Akbari, M., Jamal, S.M., et al.: Multiple linear regression, artificial neural network, and fuzzy logic prediction of 28-day compressive strength of concrete [J]. Front. Struct. Civil Eng. 11, 90–9 (2017)10.1007/s11709-016-0363-9 ↗
39. Li, M., Li, S., Tian, Y., et al.: A deep learning convolutional neural network and multi-layer perceptron hybrid fusion model for predicting the mechanical properties of carbon fiber [J]. Mater. Design. 227, 111760 (2023)10.1016/j.matdes.2023.111760 ↗
40. Udu, A.G., et al.: A machine learning approach to characterise fabrication porosity effects on the mechanical properties of additively manufactured thermoplastic composites. J. Reinf. Plast. Compos. 44(17–18), 1060–1094 (2024)
41. Qadir, A., Udu, A.G.: Optimising mechanical performance of additive manufactured composites for biomedical applications. Fibers 13(6), 79 (2025)10.3390/fib13060079 ↗
42. Zhou, Y., Hubert, P.: Properties prediction of discontinuous-fibre reinforced thermoplastic composites with fibre-cell-based fibre distribution description [J]. Mater. Today Commun. 33, 104565 (2022)10.1016/j.mtcomm.2022.104565 ↗
43. Shi, B., Deng, Z.: Multiscale reliability analysis of composite structures based on computer vision [J]. Compos. Struct. 292, 115587 (2022)10.1016/j.compstruct.2022.115587 ↗
44. Gu, G.X., Chen, C.T., Richmond, D.J., et al.: Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment [J]. Mater. Horiz. 5(5), 939–45 (2018)10.1039/C8MH00653A ↗
45. Xiong, J., Zhang, T., Shi, S.: Machine learning of mechanical properties of steels [J]. Sci. China Technological Sci. 63(7), 1247–1255 (2020)10.1007/s11431-020-1599-5 ↗
46. Osa-Uwagboe, N., et al.: Effects of seawater on mechanical performance of composite sandwich structures: A machine learning framework. Mater. (Basel) 17(11), 2549 (2024)10.3390/ma17112549 ↗
47. Guo, W., Deng, F., Meng, Z., et al.: A hybrid back-propagation neural network and intelligent algorithm combined algorithm for optimizing microcellular foaming injection molding process parameters [J]. J. Manuf. Process. 50, 528–538 (2020)10.1016/j.jmapro.2019.12.020 ↗
48. Song, Z., Liu, S., Wang, X., et al.: Optimization and prediction of volume shrinkage and warpage of injection-molded thin-walled parts based on neural network [J]. Int. J. Adv. Manuf. Technol. 109(3), 755–69 (2020)10.1007/s00170-020-05558-6 ↗
49. Rasmussen, C.E.: Evaluation of Gaussian processes and other methods for non-linear regression [D]. University of Toronto, Toronto, Canada (1997)
50. Williams, N.J., Osborne, C., Seymour, I.D., et al.: Application of finite Gaussian process distribution of relaxation times on SOFC electrodes [J]. Electrochem. Commun. 149, 107458 (2023)10.1016/j.elecom.2023.107458 ↗
51. Li, S., Fan, X.Y., Guo, Y.H., et al.: Optimization of injection molding process of transparent complex multi-cavity parts based on Kriging model and various optimization techniques [J]. Arab. J. Sci. Eng. 46(12), 11835–11845 (2021)10.1007/s13369-021-05724-2 ↗
52. Shen, C.H., Springer, G.S.: Moisture absorption and desorption of composite materials. J. Compos. Mater. 10(1), 2–20 (1976)10.1177/002199837601000101 ↗
53. Muñoz, E., García-Manrique, J.A.: Water absorption behaviour and its effect on the mechanical properties of flax fibre reinforced bioepoxy composites. Int. J. Polym. Sci. 2015(1), 390275 (2015)
54. Naseri, A.: Moisture diffusion properties of fabric composite (glass fiber/epoxy resin) (2009)
55. Melo, R.Q., Fook, M.V.L., Lima, A.G.: Non-fickian moisture absorption in vegeTable fiber reinforced polymer composites: the effect of the mass diffusivity. Polymers. 13(5), 761 (2021)10.3390/polym13050761 ↗
56. Gai, D., et al.: Dynamic load characteristics and performance degradation of CFRP wing-body connection lugs under elevated temperature wet conditions. J. Reinf. Plast. Compos. 45(1–2), 268–291 (2024)
57. Zhang, S., et al.: Research on the mechanical properties of CFRP-Al adhesively bonded structures in hygrothermal environments [J]. Int. J. Adhes. Adhes. 138, 103939 (2025)10.1016/j.ijadhadh.2025.103939 ↗
58. Yao, Z., et al.: Analysis of the influence of damp-heat aging on the shear failure of the adhesive joint of composite materials[C]. J. Phys. Conf. Ser. IOP Publ. 2783(1), 012014 (2024)10.1088/1742-6596/2783/1/012014 ↗
59. Niu, R., et al.: Durability of two epoxy adhesive bfrp joints dipped in seawater under high temperature environment. Polym. (Basel) 15(15), 3232 (2023)10.3390/polym15153232 ↗
60. American Society for Testing and Materials (ASTM): Standard test method for tensile properties of polymer matrix composite materials, ASTM D3039/D3039M-14 (2008)
61. Standard test method for shear properties of composite materials by the V-Notched: Rail shear method, ASTM D 7078/D7078M-05. American Society for Testing and Materials, West Conshohocken, PA (2005)
62. Astm, D.: Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials. Annu. Book. ASTM Stand. 15, 215–226 (2004)
63. D5961/D5961M-05: e1 Standard Test Method for Bearing Response of Polymer – Matrix Composite Laminates. Vol.15.03. Composite Materials. ASTM International, West Conshohocken,PA (2005)
64. Rocha, I.B.C.M., et al.: A combined experimental/numerical investigation on hygrothermal aging of fiber-reinforced composites. Eur. J. Mech. A. Solids. 73, 407–419 (2019)10.1016/j.euromechsol.2018.10.003 ↗
65. Wang, Z., et al.: Cohesive zone model prediction of debonding failure in CFRP-to-steel bonded interface with a ductile adhesive[J]. Compos. Sci. Technol. 230, 109315 (2022)10.1016/j.compscitech.2022.109315 ↗
66. Brewer, J.C., et al.: Quadratic stress criterion for initiation of delamina-tion[J]. J. Compos. Mater. 22(12), 1141–1155 (1988)10.1177/002199838802201205 ↗
67. Benzeggagh, M.L., et al.: ,Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus[J]. Compos. Sci. Technol. 56(4), 439–449 (1996)10.1016/0266-3538(96)00005-X ↗
68. Du, C., et al.: A micromechanical model for shape memory alloy fiber reinforced plastics considering cyclic hygrothermal damage. Int. J. Solids Struct. 311, 113228 (2025)10.1016/j.ijsolstr.2025.113228 ↗