Numerical Generation of Random Fiber Bundles and the Influence of Microstructural Properties on Mechanical Behavior
Source abstract
Abstract
Understanding the mechanical behavior of quasi-parallel fiber networks is essential for improving the manufacturing processes of fiber-reinforced composites. Mesoscale models of dry yarns and reinforcements require constitutive laws that accurately reflect the heterogeneous microstructure of fiber bundles. This study aims to develop a numerical generator of random fiber bundles for microscopic parametric studies of compaction behavior. A real fiber bundle was first reconstructed from X-ray microtomography data, and the numerical strategy was validated by tracking fiber cross-sections along the bundle length, with a fiber-position error of 5.2%. Based on this validated framework, an experiment-independent generator was established to create parameterized fiber bundles. The generated bundles reproduced the experimental compaction response with good agreement. Parametric results showed that increasing fiber waviness enhances inter-fiber interactions, increases transverse stiffness, and requires a higher load to reach the same fiber volume fraction. This framework provides a useful microscopic basis for studying fiber-bundle deformation mechanisms and for developing future mesoscopic constitutive laws.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Material Mechanics · Theoretical and Computational Physics · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Fang, H., Xi, L., Huang, Y., et al.: Fiber-reinforced composites: A comprehensive review of traditional and additive manufacturing processes and material architectures. Compos. Part A: Appl. Sci. Manufac. 205, 109684 (2026). https://doi.org/10.1016/j.compositesa.2026.10968410.1016/j.compositesa.2026.109684 ↗
2. De, B., Bera, M., Bhattacharjee, D., et al.: A comprehensive review on fiber-reinforced polymer composites: Raw materials to applications, recycling, and waste management. Prog. Mater. Sci. 146, 101326 (2024). https://doi.org/10.1016/j.pmatsci.2024.10132610.1016/j.pmatsci.2024.101326 ↗
3. Sharma, H., Kumar, A., Rana, S., et al.: Critical review on advancements on the fiber-reinforced composites: Role of fiber/matrix modification on the performance of the fibrous composites. J. Mater. Res. Technol. 26, 2975–3002 (2023). https://doi.org/10.1016/j.jmrt.2023.08.03610.1016/j.jmrt.2023.08.036 ↗
4. Phiri, R., Mavinkere Rangappa, S., Siengchin, S., et al.: Advances in lightweight composite structures and manufacturing technologies: A comprehensive review. Heliyon. 10(21), e39661 (2024). https://doi.org/10.1016/j.heliyon.2024.e3966110.1016/j.heliyon.2024.e39661 ↗
5. Alzahrani, M.M., Alamry, K.A., Hussein, M.A.: Recent advances of Fiber-reinforced polymer composites for defense innovations. Results Chem. 15, 102199 (2025). https://doi.org/10.1016/j.rechem.2025.10219910.1016/j.rechem.2025.102199 ↗
6. Zhang, X., Sun, G., Wang, C., et al.: A review of structural topology optimization for fiber-reinforced composites. Compos. Part. B: Eng. 299, 112393 (2025). https://doi.org/10.1016/j.compositesb.2025.11239310.1016/j.compositesb.2025.112393 ↗
7. Xie, J., Guo, Z., Shao, M., et al.: Mechanics of textiles used as composite preforms: A review. Compos. Struct. 304, 116401 (2023). https://doi.org/10.1016/j.compstruct.2022.11640110.1016/j.compstruct.2022.116401 ↗
8. Yang, T., Zhang, L., Li, Z., et al.: Experimental characterization methods and numerical models of woven composite preforms: A review. Compos. Part A: Appl. Sci. Manufac. 185, 108329 (2024). https://doi.org/10.1016/j.compositesa.2024.10832910.1016/j.compositesa.2024.108329 ↗
9. Rajinth, S., Prosser, R., Potluri, P., et al.: Modelling and simulation of the polymer resin flow through fibres during resin transfer moulding: a comprehensive review. Compos. Part A: Appl. Sci. Manufac. 109839 (2026). https://doi.org/10.1016/j.compositesa.2026.10983910.1016/j.compositesa.2026.109839 ↗
10. Bai, R., Guzman-Maldonado, E., Zheng, R., et al.: Influence of in-plane bending behaviour on textile composite reinforcement forming. Int. J. Mech. Sci. 273, 109206 (2024). https://doi.org/10.1016/j.ijmecsci.2024.10920610.1016/j.ijmecsci.2024.109206 ↗
11. Wang, D., Shan, Z., Liu, F., et al.: Study on tension-driven deformation compensation and fiber volume fraction regulation method for flexible oriented three-dimensional woven composite preforms. Compos. Struct. 380, 119950 (2026). https://doi.org/10.1016/j.compstruct.2025.11995010.1016/j.compstruct.2025.119950 ↗
12. Liu, J., Gao, Y., Shan, Z., et al.: Multi-parameter prediction and yarn interlacing behavior simulation in the step-by-step three-dimensional rotatry braiding process. Compos. Commun. 59, 102560 (2025). https://doi.org/10.1016/j.coco.2025.10256010.1016/j.coco.2025.102560 ↗
13. Tan, Y., Chuan Lian, N.Y., Raju, K., et al.: Brittle-ductile transition in woven thermoplastic composites incorporating yarn reorientation after structural forming: Mesoscale modeling and experimental investigation. Compos. Part A: Appl. Sci. Manufac. 203, 109579 (2026). https://doi.org/10.1016/j.compositesa.2026.10957910.1016/j.compositesa.2026.109579 ↗
14. Gao, S., Qiao, T., Zhang, Y.: Development of a multi-scale finite element model for analyzing yarn angle effects on low-velocity impact damage in woven thermoplastic composites. Thin-Walled Struct. 221, 114495 (2026). https://doi.org/10.1016/j.tws.2026.11449510.1016/j.tws.2026.114495 ↗
15. Bouhala, L., Ozyigit, S., Laachachi, A., et al.: Multiscale finite element procedure to predict the effective elastic properties of woven composites. Compos. Part. C: Open. Access. 15, 100539 (2024). https://doi.org/10.1016/j.jcomc.2024.10053910.1016/j.jcomc.2024.100539 ↗
16. Lin, J., Wang, S., Sun, Y., et al.: Fiber orientation effect on the interfacial properties of aligned fibrous materials: Percolation threshold and effective fraction of soft interfaces. Mater. Today Commun. 44, 111946 (2025). https://doi.org/10.1016/j.mtcomm.2025.11194610.1016/j.mtcomm.2025.111946 ↗
17. Wang, W., Wang, H., Fei, S., et al.: Generation of random fiber distributions in fiber reinforced composites based on Delaunay triangulation. Mater. Design. 206, 109812 (2021). https://doi.org/10.1016/j.matdes.2021.10981210.1016/j.matdes.2021.109812 ↗
18. Kumar, A., Dasgupta, A., Jain, A.: Microstructure generation algorithm and micromechanics of curved fiber composites with random waviness. Int. J. Solids Struct. 289, 112625 (2024). https://doi.org/10.1016/j.ijsolstr.2023.11262510.1016/j.ijsolstr.2023.112625 ↗
19. Pham, Q.H., Ha-Minh, C., Chu, T.L., et al.: On microscopic and homogenized macroscopic analysis of one Kevlar® KM2 yarn under transverse compressive loading. Mech. Res. Commun. (2020). https://doi.org/10.1016/j.mechrescom.2020.10349610.1016/j.mechrescom.2020.103496 ↗
20. Madi, S.E., Chatziathanasiou, T., Vanhulst, J., et al.: In situ biaxial tensile testing of composites: coupling X-ray computed tomography and digital volume correlation with finite element simulations. Compos. Part. B: Eng. 306, 112815 (2025). https://doi.org/10.1016/j.compositesb.2025.11281510.1016/j.compositesb.2025.112815 ↗
21. Wang, Y., Chen, Q., Luo, Q., et al.: Characterizing damage evolution in fiber reinforced composites using in-situ X-ray computed tomography, deep machine learning and digital volume correlation (DVC). Compos. Sci. Technol. 254, 110650 (2024). https://doi.org/10.1016/j.compscitech.2024.11065010.1016/j.compscitech.2024.110650 ↗
22. Holmes, J., Sommacal, S., Stachurski, Z., et al.: Digital image and volume correlation with X-ray micro-computed tomography for deformation and damage characterisation of woven fibre-reinforced composites. Compos. Struct. 279, 114775 (2022). https://doi.org/10.1016/j.compstruct.2021.11477510.1016/j.compstruct.2021.114775 ↗
23. Melenka, G.W., Gholami, A.: Fiber identification of braided composites using micro-computed tomography. Compos. Commun. 27, 100813 (2021). https://doi.org/10.1016/j.coco.2021.10081310.1016/j.coco.2021.100813 ↗
24. Toda, M., Grabowska, K., Ciesielska-Wróbel, I.: Application of micro-computed tomography (micro-CT) to study unevenness of the structure of yarns. Text. Res. J. 87(3), 351–368 (2017). https://doi.org/10.1177/004051751662914910.1177/0040517516629149 ↗
25. Henyš, P., Čapek, L.: Individual yarn fibre extraction from micro-CT: multilevel machine learning approach. J. Text. Inst. 112(12), 1979–1985 (2021). https://doi.org/10.1080/00405000.2020.186550310.1080/00405000.2020.1865503 ↗
26. Haji, O., Song, X., Hivet, A., et al.: Modeling of Quasi-Parallel Fiber Networks at the Microscopic Scale. Appl. Compos. Mater. 30(2), 653–675 (2023). https://doi.org/10.1007/s10443-023-10105-z10.1007/s10443-023-10105-z ↗
27. Bral, A., Daelemans, L., Degroote, J.: A novel technique to simulate and characterize yarn mechanical behavior based on a geometrical fiber model extracted from microcomputed tomography imaging. Text. Res. J. 93(9–10), 2042–2062 (2023). https://doi.org/10.1177/0040517522113700910.1177/00405175221137009 ↗
28. Zhang, H., Jabbar, A., Li, A., et al.: Image-based finite element modelling of fibre dynamics in polyester staple spun yarns. Compos. Sci. Technol. 261, 111036 (2025). https://doi.org/10.1016/j.compscitech.2025.11103610.1016/j.compscitech.2025.111036 ↗