Study on Tensile-Shear Strength of Single Lap Joint Laminates with Defects

1. Li, H., Li, P., Li, Z., Xiong, J., Zhou, B., Zhang, H., Bai, H., Wang, S., Wang, X., Cao, H., Sun, W., Han, Q., Zhou, J., Guan, Z.: Analytical modeling and analysis of the low-velocity penetration and non-penetration behaviors of fiber-reinforced composite cylindrical shells based on critical impact velocity criterion. Int. J. Impact Eng. 186, 104858 (2024). https://doi.org/10.1016/j.ijimpeng.2023.10485810.1016/j.ijimpeng.2023.104858 ↗

2. Cai, X., Zhang, W., Wang, J., Gao, Z.F., Pan, Y., Sun, C., Zhang, H.: Anti-penetration response and response mechanism of laminated structures made of different composite materials under impact load. Thin-Walled Struct. 199, 111840 (2024). https://doi.org/10.1016/j.tws.2024.11184010.1016/j.tws.2024.111840 ↗

3. Anitha Priyadharshani, S., Meher Prasad, A., Sundaravadivelu, R.: Study of GFRP composite stiffened panels with square opening. Mater. Today: Proc. (2023). https://doi.org/10.1016/j.matpr.2023.03.56210.1016/j.matpr.2023.03.562 ↗

4. McMullen, P.: Fibre/resin composites for aircraft primary structures: a short history, 1936–1984. Composites. 15, 222–230 (1984). https://doi.org/10.1016/0010-4361(84)90279-910.1016/0010-4361(84)90279-9 ↗

5. Costa, A.P.D., Botelho, E.C., Costa, M.L.: Nilson Eiji Narita, José Ricardo Tarpani: A review of welding technologies for thermoplastic composites in aerospace applications. JATM. 4, 255–266 (2012). https://doi.org/10.5028/jatm.2012.04030391210.5028/jatm.2012.040303912 ↗

6. Dirk, H.-J.A., Lukaszewicz, C., Ward, K.D., Potter: The engineering aspects of automated prepreg layup: History, present and future. Compos. Part. B: Eng. 43, 997–1009 (2012). https://doi.org/10.1016/j.compositesb.2011.12.00310.1016/j.compositesb.2011.12.003 ↗

7. Ebrahim Oromiehie, B., Gangadhara Prusty, P., Compston: Ginu Rajan: Automated fibre placement based composite structures: Review on the defects, impacts and inspections techniques. Compos. Struct. 224, 110987 (2019). https://doi.org/10.1016/j.compstruct.2019.11098710.1016/j.compstruct.2019.110987 ↗

8. Carosella, S., Hügle, S., Helber, F., Middendorf, P.: A short review on recent advances in automated fiber placement and filament winding technologies. Compos. Part. B: Eng. 287, 111843 (2024). https://doi.org/10.1016/j.compositesb.2024.11184310.1016/j.compositesb.2024.111843 ↗

9. Ma, Y., Zhang, Z., Wang, S., Pan, B., Sun, M., Zhang, G., Chai, H., Wu, H., Jiang, S.: Effect of embedded periodic fiber placement gap defects on the microstructure and bistable behavior of thermoplastic composite laminates. Polym. Compos. 44, 9008–9025 (2023). https://doi.org/10.1002/pc.2775310.1002/pc.27753 ↗

10. Tang, C., Sun, D., Zou, J., Xiong, Y., Fang, G., Zhang, W.: Lay-up defects inspection for automated fiber placement with structural light scanning and deep learning. Polym. Compos. 46 (2025). https://doi.org/10.1002/pc.2967210.1002/pc.29672 ↗

11. Weiwei Qu, J., Gao, D., Yang, R., He, Yang, Q., Cheng, L., Ke, Y.: Automated fiber placement path generation method based on prospective analysis of path performance under multiple constraints. Compos. Struct. 255, 112940 (2021). https://doi.org/10.1016/j.compstruct.2020.11294010.1016/j.compstruct.2020.112940 ↗

12. Dennis Budelmann, C., Schmidt, D., Meiners: Prepreg tack: A review of mechanisms, measurement, and manufacturing implication. Polym. Compos. 41, 3440–3458 (2020). https://doi.org/10.1002/pc.2564210.1002/pc.25642 ↗

13. Sawicki, A., Minguett, P.: The effect of intraply overlaps and gaps upon the compression strength of composite laminates. In: 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit. American Institute of Aeronautics and Astronautics, Long Beach,CA,U.S.A. (1998)10.2514/6.1998-1786 ↗

14. Lan, M., Cartié, D., Davies, P., Baley, C.: Influence of embedded gap and overlap fiber placement defects on the microstructure and shear and compression properties of carbon–epoxy laminates. Compos. Part A: Appl. Sci. Manufac. 82, 198–207 (2016). https://doi.org/10.1016/j.compositesa.2015.12.00710.1016/j.compositesa.2015.12.007 ↗

15. Turoski, L.E.: Effects of manufacturing defects on the strength of toughened carbon/ epoxy prepreg composites: (2000)

16. Croft, K., Lessard, L., Pasini, D., Hojjati, M., Chen, J., Yousefpour, A.: Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates. Compos. Part A: Appl. Sci. Manufac. 42, 484–491 (2011). https://doi.org/10.1016/j.compositesa.2011.01.00710.1016/j.compositesa.2011.01.007 ↗

17. Woigk, W., Hallett, S.R., Jones, M.I., Kuhtz, M., Hornig, A., Gude, M.: Experimental investigation of the effect of defects in Automated Fibre Placement produced composite laminates. Compos. Struct. 201, 1004–1017 (2018). https://doi.org/10.1016/j.compstruct.2018.06.07810.1016/j.compstruct.2018.06.078 ↗

18. Guin, W.E., Jackson, J.R., Bosley, C.M.: Effects of tow-to-tow gaps in composite laminates fabricated via automated fiber placement. Compos. Part A: Appl. Sci. Manufac. 115, 66–75 (2018). https://doi.org/10.1016/j.compositesa.2018.09.01410.1016/j.compositesa.2018.09.014 ↗

19. Greenhalgh, E., Meeks, C., Clarke, A., Thatcher, J.: The effect of defects on the performance of post-buckled CFRP stringer-stiffened panels. Compos. Part A: Appl. Sci. Manufac. 34, 623–633 (2003). https://doi.org/10.1016/S1359-835X(03)00098-810.1016/S1359-835X(03)00098-8 ↗

20. Gädke, M., Geier, B., -Chr, H., Goetting, H., Klein, K., Rohwer, R., Zimmermann: Damage influence on the buckling load of CFRP stringer-stiffened panels. Compos. Struct. 36, 249–275 (1996). https://doi.org/10.1016/S0263-8223(96)00080-310.1016/S0263-8223(96)00080-3 ↗

21. Suh, S.S., Han, N.L., Yang, J.M., Hahn, H.T.: Compression behavior of stitched stiffened panel with a clearly visible stiffener impact damage. Compos. Struct. 62, 213–221 (2003). https://doi.org/10.1016/S0263-8223(03)00116-810.1016/S0263-8223(03)00116-8 ↗

22. Pietropaoli, E., Riccio, A.,: A Global/Local Finite Element Approach for Predicting Interlaminar and Intralaminar Damage Evolution in Composite Stiffened Panels Under Compressive Load. Appl. Compos. Mater. 18, 113 (2010). https://doi.org/10.1007/S10443-010-9135-110.1007/S10443-010-9135-1 ↗

23. Orifici, A.C., Thomson, R.S., Degenhardt, R., Bisagni, C., Bayandor, J.: A Finite Element Methodology for Analysing Degradation and Collapse in Postbuckling Composite Aerospace Structures. J. Compos. Mater. 43, 3239–3263 (2009). https://doi.org/10.1177/002199830934529410.1177/0021998309345294 ↗

24. Zhao, L., Wang, K., Ding, F., Qin, T., Xu, J., Liu, F., Zhang, J.: A post-buckling compressive failure analysis framework for composite stiffened panels considering intra-, inter-laminar damage and stiffener debonding. Results Phys. 13, 102205 (2019). https://doi.org/10.1016/j.rinp.2019.10220510.1016/j.rinp.2019.102205 ↗

25. Gliszczynski, A., Kubiak, T.,: Progressive failure analysis of thin-walled composite columns subjected to uniaxial compression. Compos. Struct. 169, 52–61 (2017). https://doi.org/10.1016/j.compstruct.2016.10.02910.1016/j.compstruct.2016.10.029 ↗

26. Gong, Y., Zhao, L., Zhang, J., Wang, Y., Hu, N.: Delamination propagation criterion including the effect of fiber bridging for mixed-mode I/II delamination in CFRP multidirectional laminates. Compos. Sci. Technol. 151, 302–309 (2017). https://doi.org/10.1016/j.compscitech.2017.09.00210.1016/j.compscitech.2017.09.002 ↗

27. Yap, J.W.H., Scott, M.L., Thomson, R.S., Hachenberg, D.: The analysis of skin-to-stiffener debonding in composite aerospace structures. Compos. Struct. 57, 425–435 (2002). https://doi.org/10.1016/S0263-8223(02)00110-110.1016/S0263-8223(02)00110-1 ↗

28. Yap, J.W.H., Scott, M.L., Thomson, R.S., Hachenberg, D.: Influence of post-buckling behaviour of composite stiffened panels on the damage criticality. Compos. Struct. 66, 197–206 (2004). https://doi.org/10.1016/j.compstruct.2004.04.03810.1016/j.compstruct.2004.04.038 ↗

29. Yetman, J.E., Sobey, A.J., Blake, J.I.R., Shenoi, R.A.: Investigation into skin stiffener debonding of top-hat stiffened composite structures. Compos. Struct. 132, 1168–1181 (2015). https://doi.org/10.1016/j.compstruct.2015.06.06110.1016/j.compstruct.2015.06.061 ↗

30. Ji, R., Zhao, L., Wang, K., Liu, F., Gong, Y., Zhang, J.: Effects of debonding defects on the postbuckling and failure behaviors of composite stiffened panel under uniaxial compression. Compos. Struct. 256, 113121 (2021). https://doi.org/10.1016/j.compstruct.2020.11312110.1016/j.compstruct.2020.113121 ↗

31. Zhang, H., Li, M., Zhou, J., Yang, D., Wang, H., Song, X., Ke, Y.: Applicability evaluation of damage evolution models in simulating repeated low-velocity impact behavior of composite laminates. J. Reinf. Plast. Compos. 44, 1216–1237 (2025). https://doi.org/10.1177/0731684424123946810.1177/07316844241239468 ↗

32. ASTM D14 Committee: Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies

33. Li, X., Ma, D., Liu, H., Tan, W., Gong, X., Zhang, C., Li, Y.: Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact. Compos. Struct. 207, 727–739 (2019). https://doi.org/10.1016/j.compstruct.2018.09.09310.1016/j.compstruct.2018.09.093 ↗

34. Hashin, Z.: Failure Criteria for Unidirectional Fiber Composites. J. Appl. Mech. 47, 329–334 (1980). https://doi.org/10.1115/1.315366410.1115/1.3153664 ↗

35. Chang, F.K., Springer, G.S.: The Strengths of Fiber Reinforced Composite Bends. J. Compos. Mater. 20, 30–45 (1986). https://doi.org/10.1177/00219983860200010310.1177/002199838602000103 ↗

36. Benzeggagh, M.L., Kenane, M.: Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos. Sci. Technol. 56, 439–449 (1996). https://doi.org/10.1016/0266-3538(96)00005-X10.1016/0266-3538(96)00005-X ↗

37. Qian, S., Liu, X., Ye, Y., Xu, Q., Zhang, T., Li, X.: Effect of gap and overlap fiber placement defects on the delamination behavior of L-shaped composite laminates. Compos. Struct. 268, 113963 (2021). https://doi.org/10.1016/j.compstruct.2021.11396310.1016/j.compstruct.2021.113963 ↗

38. Chen, Q., Ye, Y., Qian, S., Xu, Q., Qu, W., Song, X., Ke, Y.: Modeling on the effect of automated fiber placement induced gaps in curved composite laminates. Compos. Struct. 328, 117721 (2024). https://doi.org/10.1016/j.compstruct.2023.11772110.1016/j.compstruct.2023.117721 ↗