Infrared Welding as an Efficient Joining Method for Sustainable Thermoplastic Composites
Source abstract
Abstract
Abstract Thermoplastic composites are gaining attention due to their recyclability, high toughness, and ability to undergo fusion bonding. This study investigates the use of infrared radiation (IR) for welding acrylic resin-based thermoplastic composites reinforced with carbon and glass fibers. The Elium ® 150 resin was selected for its hybrid thermoset-thermoplastic properties, enabling room-temperature polymerization and reprocessing. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) determined a glass transition temperature of 94 °C and degradation onset at 204 °C (1% mass loss in air). Lap shear tests were conducted to evaluate the mechanical performance of welded joints at different temperatures (150 °C, 175 °C, and 200 °C) and pressures (0.4 MPa and 0.5 MPa). The highest lap shear strength was observed at 150 °C and 0.5 MPa, with values of 9.59 ± 1.60 MPa for carbon fiber and 13.72 ± 4.76 MPa for glass fiber composites. Fractographic analysis using scanning electron microscopy (SEM) identified adhesive and cohesive failure modes. Results indicate that infrared welding provides a promising, rapid, and contamination-free technique for joining thermoplastic composites, with glass fiber-reinforced laminates showing superior adhesion compared to carbon fiber composites. These findings contribute to the development of lightweight, recyclable composite structures for aerospace, automotive, and wind energy applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Fredi, G., Dorigato, A., Pegoretti, A.: Novel reactive thermoplastic resin as a matrix for laminates containing phase change microcapsules. Polym. Compos. 40, 3711–3724 (2019). https://doi.org/10.1002/pc.2523310.1002/pc.25233 ↗
2. Kandemir, A., Longana, M.L., Hamerton, I., Eichhorn, S.J.: Developing aligned discontinuous flax fibre composites: Sustainable matrix selection and repair performance of vitrimers. Composites Part B: Engineering 243, 110139 (2022). https://doi.org/10.1016/j.compositesb.2022.11013910.1016/j.compositesb.2022.110139 ↗
3. Gizynski, M., Baishya, B.R.: Investigation of carbon fiber – reinforced thermoplastic polymers using thermogravimetric analysis. J. Thermoplast Compos. Mater. 1–15 (2019). https://doi.org/10.1177/089270571983945010.1177/0892705719839450 ↗
4. Gohel, G., Bhudolia, S.K., Bala, S., Elisetty, S., Fai, K., Gerard, P.: Development and impact characterization of acrylic thermoplastic composite bicycle helmet shell with improved safety and performance. Compos. Part B 221, 109008 (2021). https://doi.org/10.1016/j.compositesb.2021.10900810.1016/j.compositesb.2021.109008 ↗
5. Khalili, P., Blinzler, B., Kádár, R., Blomqvist, P., Sandinge, A., Bisschop, R., Liu, X.: Ramie fabric Elium ® composites with fl ame retardant coating : Flammability, smoke, viscoelastic and mechanical properties. Composites Part A: Applied Science and Manufacturing 137, 105986 (2020). https://doi.org/10.1016/j.compositesa.2020.10598610.1016/j.compositesa.2020.105986 ↗
6. Jaeschke, P., Wippo, V., Suttmann, O., Overmeyer, L.: Advanced laser welding of high-performance thermoplastic composites. J. Laser Appl. 27, S29004 (2015). https://doi.org/10.2351/1.490637910.2351/1.4906379 ↗
7. Garofalo, J., Walczyk, D.: In situ impregnation of continuous thermoplastic composite prepreg for additive manufacturing and automated fiber placement. Composites Part A: Applied Science and Manufacturing 147, 106446 (2021). https://doi.org/10.1016/j.compositesa.2021.10644610.1016/j.compositesa.2021.106446 ↗
8. Li, W., Frederick, H., Palardy, G.: Multifunctional films for thermoplastic composite joints: Ultrasonic welding and damage detection under tension loading. Composites Part A: Applied Science and Manufacturing (2021). https://doi.org/10.1016/j.compositesa.2020.10622110.1016/j.compositesa.2020.106221 ↗
9. Pegoretti, A.: Towards sustainable structural composites: A review on the recycling of continuous-fiber-reinforced thermoplastics. Adv. Ind. Eng. Polym. Res. 4, 105–115 (2021). https://doi.org/10.1016/j.aiepr.2021.03.00110.1016/j.aiepr.2021.03.001 ↗
10. Di Benedetto, R.M., Gomes, G.F., Janotti, A., Ancelotti Junior, A.C., Botelho, E.C.: Statistical approach to optimize crashworthiness of thermoplastic commingled composites. Materials Today Communications (2022). https://doi.org/10.1016/j.mtcomm.2022.10365110.1016/j.mtcomm.2022.103651 ↗
11. Olhan, S., Behera, B.K.: Development of GNP nanofiller based textile structural composites for enhanced mechanical, thermal, and viscoelastic properties for automotive components. Advanced Composites and Hybrid Materials 7, 1–24 (2024). https://doi.org/10.1007/s42114-024-00834-510.1007/s42114-024-00834-5 ↗
12. Raponi, O.A., Barbosa, L.C.M., Souza, B.R., De, A., Junior, A.C.: Study of the influence of initiator content in the polymerization reaction of a thermoplastic liquid resin for advanced composite manufacturing. Adv. Polym. Technol. 37, 3579–3587 (2018). https://doi.org/10.1002/adv.2214210.1002/adv.22142 ↗
13. Raponi, O.A., Souza, B.R., Barbosa, L.C.M., Ancelotti Junior, A.C.: Thermal, rheological, and dielectric analyses of the polymerization reaction of a liquid thermoplastic resin for infusion manufacturing of composite materials. Polym. Test. 71, 32–37 (2018). https://doi.org/10.1016/j.polymertesting.2018.08.02410.1016/j.polymertesting.2018.08.024 ↗
14. Gohel, G., Bhudolia, S.K., Kantipudi, J., Leong, K.F., Barsotti, R.J.: Ultrasonic welding of novel Carbon/Elium® with carbon/epoxy composites. Composites Communications 22, 100463 (2020). https://doi.org/10.1016/j.coco.2020.10046310.1016/j.coco.2020.100463 ↗
15. Bhudolia, S.K., Gohel, G., Leong, K.F., Islam, A.: Advances in ultrasonicwelding of thermoplastic composites: A review. Materials (2020). https://doi.org/10.3390/ma1306128410.3390/ma13061284 ↗
16. Bhudolia, S.K., Gohel, G., Kah Fai, L., Barsotti, R.J.: Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites. Mater. Lett. 264, 127362 (2020). https://doi.org/10.1016/j.matlet.2020.12736210.1016/j.matlet.2020.127362 ↗
17. Han, N., Yuksel, O., Zanjani, J.S.M., An, L.L., Akkerman, R., Baran, I.: Experimental investigation of the interlaminar failure of Glass/Elium® thermoplastic composites manufactured with different processing temperatures. Appl. Compos. Mater. 29, 1061–1082 (2022). https://doi.org/10.1007/s10443-021-10000-510.1007/s10443-021-10000-5 ↗
18. Obande, W., Brádaigh, C.M.Ó., Ray, D.: Continuous fibre-reinforced thermoplastic acrylic-matrix composites prepared by liquid resin infusion – A review. Composites Part B: Engineering (2021). https://doi.org/10.1016/j.compositesb.2021.10877110.1016/j.compositesb.2021.108771 ↗
19. Zinnecker, V., Stokes-gri, C.M., Khudiakova, A., Wolfahrt, M., Compston, P.: A comparative study for shear testing of thermoplastic-based composites and metal-composite hybrids. Compos. Part A. 137, 5 (2020). https://doi.org/10.1016/j.compositesa.2020.10595310.1016/j.compositesa.2020.105953 ↗
20. Li, W., Palardy, G.: Investigation of welding repair methods for thermoplastic composite joints. Composites Part B: Engineering 264, 110924 (2023). https://doi.org/10.1016/j.compositesb.2023.11092410.1016/j.compositesb.2023.110924 ↗
21. Shanmugam, L., Kazemi, M.E., Rao, Z., Yang, L., Yang, J.: On the metal thermoplastic composite interface of Ti alloy/UHMWPE-Elium ® laminates. Composites Part B: Engineering (2020). https://doi.org/10.1016/j.compositesb.2019.10757810.1016/j.compositesb.2019.107578 ↗
22. Gebhardt, M., Manolakis, I., Chatterjee, A., Kalinka, G., Deubener, J., Pfnür, H., Chakraborty, S., Meiners, D.: Reducing the raw material usage for room temperature infusible and polymerisable thermoplastic CFRPs through reuse of recycled waste matrix material. Composites Part B: Engineering 216, 108877 (2021). https://doi.org/10.1016/j.compositesb.2021.10887710.1016/j.compositesb.2021.108877 ↗
23. Obande, W., Stankovic, D., Bajpai, A., Devine, M., Wurzer, C., Lykkeberg, A., Garden, J.A., Ó Brádaigh, C.M., Ray, D.: Thermal reshaping as a route for reuse of end-of-life glass fibre-reinforced acrylic composites. Composites Part B: Engineering 257, 110662 (2023). https://doi.org/10.1016/j.compositesb.2023.11066210.1016/j.compositesb.2023.110662 ↗
24. Di Benedetto, R.M., Janotti, A., Gomes, G.F., Ancelotti Junior, A.C., Botelho, E.C.: Development of hybrid steel-commingled composites CF/PEEK/BwM by filament winding and thermoforming. Compos. Sci. Technol. (2022). https://doi.org/10.1016/j.compscitech.2021.10917410.1016/j.compscitech.2021.109174 ↗
25. Barbosa, L.C.M., Duque, G.R.V., Ancelotti Junior, A.C.: Temperature-frequency- dependent properties analysis of a bio-composite based on a new liquid thermoplastic resin reinforced with jute fibers. J. Thermoplast. Compos. Mater. 35, 2125–2145 (2022). https://doi.org/10.1177/089270572095913910.1177/0892705720959139 ↗
26. Bodaghi, M., Park, C.H., Krawczak, P.: Reactive Processing of Acrylic-Based Thermoplastic Composites: A Mini-Review. Front. Mater. 9, 1–8 (2022). https://doi.org/10.3389/fmats.2022.93133810.3389/fmats.2022.931338 ↗
27. Kaybal, H.B., Ulus, H.: Comparative analysis of thermoplastic and thermoset adhesives performance and the influence on failure analysis in jointed elium-based composite structures. Polym. Compos. 45, 3474–3492 (2024). https://doi.org/10.1002/pc.2800310.1002/pc.28003 ↗
28. Benvenuto, L., Ferretti, L., Lertora, E., Mandolfino, C., Benvenuto, M., Pizzorni, M.: Resistance welding of thermoplastic composites with Elium-impregnated carbon-fibre heating element. Mater. Res. Proc. 54, 2327–2336 (2025). https://doi.org/10.21741/9781644903599-25110.21741/9781644903599-251 ↗
29. Hendlmeier, A., Marinovic, L.I., Al-Assafi, S., Stojcevski, F., Henderson, L.C.: Sizing effects on the interfacial shear strength of a carbon fibre reinforced two-component thermoplastic polymer. Composites Part A: Applied Science and Manufacturing (2019). https://doi.org/10.1016/j.compositesa.2019.10562210.1016/j.compositesa.2019.105622 ↗
30. Pantelelis, N., Bistekos, E., Emmerich, R., Gerard, P., Zoller, A., Gallardo, R.R.: Compression RTM of reactive thermoplastic composites using microwaves and cure monitoring. Procedia CIRP. 85, 249–254 (2019). https://doi.org/10.1016/j.procir.2019.10.00510.1016/j.procir.2019.10.005 ↗
31. Kazemi, M.E., Shanmugam, L., Dadashi, A., Shakouri, M., Lu, D., Du, Z., Hu, Y., Wang, J., Zhang, W., Yang, L., Yang, J.: Investigating the roles of fiber, resin, and stacking sequence on the low-velocity impact response of novel hybrid thermoplastic composites. Composites Part B: Engineering (2021). https://doi.org/10.1016/j.compositesb.2020.10855410.1016/j.compositesb.2020.108554 ↗
32. Stanley, W.F., Bandaru, A.K., Rana, S., Parveen, S., Pichandi, S.: Mechanical, dynamic-mechanical and wear performance of novel non-crimp glass fabric-reinforced liquid thermoplastic composites filled with cellulose microcrystals. Mater. Des. 212, 110276 (2021). https://doi.org/10.1016/j.matdes.2021.11027610.1016/j.matdes.2021.110276 ↗
33. Zoller, A., Escalé, P., Gérard, P.: Pultrusion of Bendable Continuous Fibers Reinforced Composites With Reactive Acrylic Thermoplastic ELIUM® Resin. Front. Mater. 6, 1–9 (2019). https://doi.org/10.3389/fmats.2019.0029010.3389/fmats.2019.00290 ↗
34. Bhudolia, S.K., Perrotey, P., Joshi, S.C.: Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix. Composites Part B: Engineering 134, 246–253 (2018). https://doi.org/10.1016/j.compositesb.2017.09.05710.1016/j.compositesb.2017.09.057 ↗
35. Gobikannan, T., Portela, A., Haldar, A.K., Nash, N.H., Bachour, C., Manolakis, I., Comer, A.J.: Flexural properties and failure mechanisms of infusible thermoplastic- and thermosetting based composite materials for marine applications. Compos. Struct. 273, 114276 (2021). https://doi.org/10.1016/j.compstruct.2021.11427610.1016/j.compstruct.2021.114276 ↗
36. Sharma, S., Acharya, A.D., Thakur, Y.S., Bhawna: Controlled synthesis of hierarchical BiOCl nanostructure with exposed { 010 } facets to yield enhanced photocatalytic performance for PMMA deterioration. J. Polym. Res. 29, 1–22 (2022). https://doi.org/10.1007/s10965-022-03313-x10.1007/s10965-022-03313-x ↗
37. Fernández, A., Redondo, A., Martín-de-León, J., Cantero, D.: PMMA stability under hydrothermal conditions. J. Supercrit. Fluids. 198, 1–12 (2023). https://doi.org/10.1016/j.supflu.2023.10593810.1016/j.supflu.2023.105938 ↗
38. Rahman, F., Carbaugh, D.J., Wright, J.T., Rajan, P., Pandya, S.G.: A review of polymethyl methacrylate ( PMMA ) as a versatile lithographic resist – With emphasis on UV exposure. Microelectron. Eng. 224, 111238 (2020). https://doi.org/10.1016/j.mee.2020.11123810.1016/j.mee.2020.111238 ↗
39. Chen, R., Pan, R., Li, Q.: Thermal degradation characteristics, kinetics and thermodynamics of micron-sized PMMA in oxygenous atmosphere using thermogravimetry and deconvolution method based on Gauss function. Journal of Loss Prevention in the Process Industries 71, 104488 (2021). https://doi.org/10.1016/j.jlp.2021.10448810.1016/j.jlp.2021.104488 ↗
40. Cosson, B., Akué Asséko, A.C., Lagardère, M., Dauphin, M.: 3D modeling of thermoplastic composites laser welding process – A ray tracing method coupled with finite element method. Optics & Laser Technology 119, 105585 (2019). https://doi.org/10.1016/j.optlastec.2019.10558510.1016/j.optlastec.2019.105585 ↗
41. Ouyang, Y., Chen, C.: Research advances in the mechanical joining process for fiber reinforced plastic composites. Compos. Struct. 296, 115906 (2022). https://doi.org/10.1016/j.compstruct.2022.11590610.1016/j.compstruct.2022.115906 ↗
42. Li, W., Palardy, G.: Damage monitoring methods for fiber-reinforced polymer joints : A review. Compos. Struct. 299, 116043 (2022). https://doi.org/10.1016/j.compstruct.2022.11604310.1016/j.compstruct.2022.116043 ↗
43. Popp, J., Drummer, D.: Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating. Journal of Advanced Joining Processes 5, 100084 (2022). https://doi.org/10.1016/j.jajp.2021.10008410.1016/j.jajp.2021.100084 ↗
44. Brassard, D., Dubé, M., Tavares, J.R.: Resistance welding of thermoplastic composites with a nanocomposite heating element. Composites Part B: Engineering 165, 779–784 (2019). https://doi.org/10.1016/j.compositesb.2019.02.03810.1016/j.compositesb.2019.02.038 ↗
45. Murray, R.E., Roadman, J., Beach, R.: Fusion joining of thermoplastic composite wind turbine blades : Lap-shear bond characterization. Renewable Energy 140, 501–512 (2019). https://doi.org/10.1016/j.renene.2019.03.08510.1016/j.renene.2019.03.085 ↗
46. Murray, R.E., Beach, R., Barnes, D., Snowberg, D., Berry, D., Rooney, S., Jenks, M., Gage, B., Boro, T., Wallen, S., Hughes, S.: Structural validation of a thermoplastic composite wind turbine blade with comparison to a thermoset composite blade. Renew. Energy. 18 (2020). https://doi.org/10.1016/j.renene.2020.10.04010.1016/j.renene.2020.10.040 ↗
47. Bhudolia, S.K., Gohel, G., Kantipudi, J., Leong, K.F., Gerard, P.: Manufacturing and investigating the load, energy and failure attributes of thin ply carbon/Elium® thermoplastic hollow composites under low-velocity impact. Mater. Des. 206, 1–19 (2021). https://doi.org/10.1016/j.matdes.2021.10981410.1016/j.matdes.2021.109814 ↗
48. Olhan, S., Antil, B., Behera, B.K.: Repair technologies for structural polymeric composites: An automotive perspective. Compos. Struct. 352, 118711 (2025). https://doi.org/10.1016/j.compstruct.2024.11871110.1016/j.compstruct.2024.118711 ↗
49. Olhan, S., Antil, B., Khatkar, V., Behera, B.K.: Mechanical, thermal, and viscoelastic behavior of sisal fibre-based structural composites for automotive applications: Experimental and FEM analysis. Compos. Struct. 322, 117427 (2023). https://doi.org/10.1016/j.compstruct.2023.11742710.1016/j.compstruct.2023.117427 ↗
50. Putnam-Neeb, A.A., Kaiser, J.M., Hubbard, A.M., Street, D.P., Dickerson, M.B., Nepal, D., Baldwin, L.A.: Self-healing and polymer welding of soft and stiff epoxy thermosets via silanolates. Adv. Compos. Hybrid Mater. 5, 3068–3080 (2022). https://doi.org/10.1007/s42114-022-00558-410.1007/s42114-022-00558-4 ↗
51. Li, W., Palardy, G.: Electro-Mechanical Response of Ultrasonically Welded Thermoplastic Composite Interfaces under Static and Cyclic Flexural Loads Using Nanocomposites. Appl. Polym. Mater. 4, 5209–5223 (2022). https://doi.org/10.1021/acsapm.2c0073710.1021/acsapm.2c00737 ↗
52. ASTM D3418-15: Transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning calorimetry., West Conshohocken, PA: (2005)
53. Bamane, S.S., Deshpande, P.P., Patil, S.U., Maiaru, M., Odegard, G.M.: Evolution of Physical, Thermal, and Mechanical Properties of Poly(methyl Methacrylate)-Based Elium Thermoplastic Polymer During Polymerization. The Journal of Physical Chemistry C (2024). https://doi.org/10.1021/acs.jpcc.4c0406110.1021/acs.jpcc.4c04061 ↗
54. Olhan, S., Behera, B.K.: Mechanical, thermogravimetric, and dynamic mechanical behavior of high-performance textile structural composite panels for automotive applications. J. Manuf. Process. 102, 608–621 (2023). https://doi.org/10.1016/j.jmapro.2023.08.00310.1016/j.jmapro.2023.08.003 ↗
55. Li, H., Zhao, L., Qiao, Y., Bai, X., Wang, D., Qu, C., Liu, C., Wang, Y.: Surface treatment of composites with bismaleimide resin-based wet peel ply for enhanced adhesive bonding performance. (2021)10.3390/polym13203488 ↗
56. Alajmi, A.E., Alsaeed, T., Alotaibi, J.G., Srelam, J.K., Yousif, B.F.: Investigating the lap shear adhesion of coir and glass-fibre reinforced epoxy bonding to mild steel with varying volume fractions. Front. Mech. Eng 9, 1–9 (2023). https://doi.org/10.3389/fmech.2023.123264310.3389/fmech.2023.1232643 ↗
57. Obande, W., Ray, D., Brádaigh, C.M.Ó.: Viscoelastic and drop-weight impact properties of an acrylic-matrix composite and a conventional thermoset composite – A comparative study. Materials Letters 238, 38–41 (2019). https://doi.org/10.1016/j.matlet.2018.11.13710.1016/j.matlet.2018.11.137 ↗
58. Akkerman, R., Bouwman, M., Wijskamp, S.: Analysis of the Thermoplastic Composite Overmolding Process : Interface Strength. Frontiers in Materials (2020). https://doi.org/10.3389/fmats.2020.0002710.3389/fmats.2020.00027 ↗
59. Palmieri, B., Petriccione, A., Tommaso, G.. De., Giordano, M., Martone, A.: An Efficient Thermal Cure Profile for Thick Parts Made by Reactive Processing of Acrylic Thermoplastic Composites. Journal of Composites Science (2021). https://doi.org/10.3390/jcs509022910.3390/jcs5090229 ↗
60. Han, N., Baran, I., Seyyed, J., Zanjani, M., Yuksel, O., An, L.: Experimental and computational analysis of the polymerization overheating in thick glass / Elium ® acrylic thermoplastic resin composites. Compos. Part B 202, 108430 (2020). https://doi.org/10.1016/j.compositesb.2020.10843010.1016/j.compositesb.2020.108430 ↗
61. Siddique, A., Iqbal, Z., Nawab, Y., Shaker, K.: A review of joining techniques for thermoplastic composite materials. J. Thermoplast. Compos. Mater 0, 1–38 (2022). https://doi.org/10.1177/0892705722109666210.1177/08927057221096662 ↗
62. Yousef, S., Eimontas, J., Striugas, N., Subadra, S.P., Abdelnaby, M.A.: Thermal degradation and pyrolysis kinetic behaviour of glass fibre-reinforced thermoplastic resin by TG-FTIR, Py-GC / MS, linear and nonlinear isoconversional models. J. Mater. Res. Technol 15, 5360–5374 (2021). https://doi.org/10.1016/j.jmrt.2021.11.01110.1016/j.jmrt.2021.11.011 ↗
63. Cao, D.: Fusion joining of thermoplastic composites with a carbon fabric heating element modified by multiwalled carbon nanotube sheets. Int. J. Adv. Manuf. Technol 128, 4443–4453 (2023). https://doi.org/10.1007/s00170-023-12202-610.1007/s00170-023-12202-6 ↗
64. ARKEMA: Elium 150 - Technical Datasheet
65. Ozturk, F., Cobanoglu, M., Ece, R.E.: Recent advancements in thermoplastic composite materials in aerospace industry. J. Thermoplast Compos. Mater. 37, 3084–3116 (2024). https://doi.org/10.1177/0892705723122282010.1177/08927057231222820 ↗
66. Devine, M., Bajpai, A., Ó Brádaigh, C.M., Ray, D.: ‘Resin welding’: A novel route to joining acrylic composite components at room temperature. Compos. Part B Eng 272, 1–11 (2024). https://doi.org/10.1016/j.compositesb.2024.11121210.1016/j.compositesb.2024.111212 ↗
67. Barbosa, L.C.M., de Souza, S.D.B., Botelho, E.C., Cândido, G.M., Rezende, M.C.: Fractographic evaluation of welded joints of PPS/glass fiber thermoplastic composites. Engineering Failure Analysis 102, 60–68 (2019). https://doi.org/10.1016/j.engfailanal.2019.04.03210.1016/j.engfailanal.2019.04.032 ↗
68. Perrin, H., Mertz, G., Senoussaoui, N.-L., Borghini, L., Klein, S., Vaudemont, R.: Surface functionalization of thermoset composite for infrared hybrid welding. Functional Composite Materials (2021). https://doi.org/10.1186/s42252-021-00021-510.1186/s42252-021-00021-5 ↗
69. Olhan, S., Antil, B., Behera, B.K.: Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures. Compos. Struct. 352, 118676 (2025). https://doi.org/10.1016/j.compstruct.2024.11867610.1016/j.compstruct.2024.118676 ↗
70. Mamalis, D., Obande, W., Koutsos, V., Blackford, J.R., Ó Brádaigh, C.M., Ray, D.: Novel thermoplastic fibre-metal laminates manufactured by vacuum resin infusion: The effect of surface treatments on interfacial bonding. Mater. Des. 162, 331–344 (2019). https://doi.org/10.1016/j.matdes.2018.11.04810.1016/j.matdes.2018.11.048 ↗
71. Holmes, J., Vlandis, G., Stachurski, Z., Das, R., Compston, P.: Failure behaviour in woven thermoplastic composites subjected to various deformation modes. Composites Part A: Applied Science and Manufacturing 146, 106410 (2021). https://doi.org/10.1016/j.compositesa.2021.10641010.1016/j.compositesa.2021.106410 ↗
72. Shanmugam, L., Kazemi, M.E., Rao, Z., Lu, D., Wang, X., Wang, B., Yang, L., Yang, J.: Enhanced Mode I fracture toughness of UHMWPE fabric / thermoplastic laminates with combined surface treatments of polydopamine and functionalized carbon nanotubes. Composites Part B: Engineering 178, 107450 (2019). https://doi.org/10.1016/j.compositesb.2019.10745010.1016/j.compositesb.2019.107450 ↗
73. Fu, X., Yuan, X., Li, G., Wu, Y., Tong, H., Kang, S., Luo, J., Pan, Z., Lu, W.: A study on ultrasonic welding of thermoplastics with significant differences in physical properties under different process parameters. Materials Today Communications 33, 105009 (2022). https://doi.org/10.1016/j.mtcomm.2022.10500910.1016/j.mtcomm.2022.105009 ↗
74. Niu, Y., Wang, Z., Peng, T., Li, C., Qu, F., Qiu, W., Guo, W., Zhao, R., Xu, C., Xu, Q.: Bonding and adhesion mechanisms for laser transmission welding of thermoplastic polymers in liquid flow batteries. Langmuir. 41, 13209–13219 (2025). https://doi.org/10.1021/acs.langmuir.5c0089910.1021/acs.langmuir.5c00899 ↗