journal article·2026-04Open access

A Review on Optimization and Damage Simulation in Cylinders for Green Hydrogen Storage

Marcos Lazaro Batista, Felipe Palato, Geovani Rodrigues, Anthonin Demarbaix, Yohan Ali Diaz Méndez, Sebastião Simoes Cunha

Applied Composite Materials· Volume 33· Issue 2

Abstract

Abstract This review article addresses the optimization and damage simulation in Type III and IV composite cylinders for the safe and efficient storage of green hydrogen, a promising energy alternative. The text details the multiple failure modes that can compromise the structural integrity of these high-pressure tanks, such as manufacturing defects, hydrogen embrittlement, permeation, cracks, and delamination. To mitigate these risks, the study highlights the importance of design optimization thru advanced computational simulations, using software such as ANSYS and ABAQUS and failure criteria like Tsai-Wu and Hashin, which allow predicting the burst pressure and identifying critical points in the structure. The integration of experimental tests with these numerical simulations is, therefore, fundamental to developing lighter and more reliable cylinders, ensuring the safety of hydrogen storage systems, especially in risk scenarios such as fires.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Combustion and Detonation Processes · Risk and Safety Analysis · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Zhang, L., Jia, C., Bai, F., Wang, W., An, S., Zhao, K., Li, Z., Li, J., Sun, H.: A comprehensive review of the promising clean energy carrier: Hydrogen production, transportation, storage, and utilization (hptsu) technologies. Fuel 355, 129455 (2024)
2. Bhuiyan, M.M.H., Siddique, Z.: Hydrogen as an alternative fuel: A comprehensive review of challenges and opportunities in production, storage, and transportation. Int. J. Hydrogen Energy 102, 1026–1044 (2025)10.1016/j.ijhydene.2025.01.033 ↗
3. Hamedani, E.A., Alenabi, S.A., Talebi, S.: Hydrogen as an energy source: A review of production technologies and challenges of fuel cell vehicles. Energy Rep. 12, 3778–3794 (2024)10.1016/j.egyr.2024.09.030 ↗
4. Boretti, A., Pollet, B.G.: Hydrogen economy: Paving the path to a sustainable, low-carbon future. Int. J. Hydrogen Energy 93, 307–319 (2024)10.1016/j.ijhydene.2024.10.350 ↗
5. Feki, I., Shirinbayan, M., Nouira, S., Bi, R. T., Maeso, J. B., Thomas, C., Fitoussi, J.: Composites in high-pressure hydrogen storage: A review of multiscale characterization and mechanical behavior. Composites Part C: Open Access, 16, 100555 (2025)10.1016/j.jcomc.2024.100555 ↗
6. Barbosa, L.G., Gomes, G.F.: Numerical simulation of pressure vessel explosions using metallic and composite materials: A comparative study. Int. J. Hydrogen Energy 58, 289–301 (2024)10.1016/j.ijhydene.2024.01.149 ↗
7. Sapre, S., Pareek, K.: Investigation of structural stability of type IV compressed hydrogen storage tank during refueling of fuel cell vehicle. Energy Storage 2, 03 (2020)10.1002/est2.150 ↗
8. Zhang, M., Lv, H., Kang, H., Zhou, W., Zhang, C.: A literature review of failure prediction and analysis methods for composite high-pressure hydrogen storage tanks. Int. J. Hydrogen Energy 44(47), 25777–25799 (2019)10.1016/j.ijhydene.2019.08.001 ↗
9. Su, Y., Lv, H., Zhou, W., Zhang, C.: Review of the hydrogen permeability of the liner material of type IV on-board hydrogen storage tank. World Electr. Vehicle J., 12(3) (2021)10.3390/wevj12030130 ↗
10. Alves, M.P., Gul, W., Cimini Junior, C.A., Ha, S.K.: A review on industrial perspectives and challenges on material, manufacturing, design and development of compressed hydrogen storage tanks for the transportation sector. Energies, 15(14) (2022)10.3390/en15145152 ↗
11. Roham, R., Mahdi, F., Hadi, H.: The influence of production inconsistencies on the functional failure of grp pipes. Steel Compos. Struct. 19(6), 1369–1379 (2015)10.12989/scs.2015.19.6.1369 ↗
12. Rafiee, R.: Apparent hoop tensile strength prediction of glass fiber-reinforced polyester pipes. J. Compos. Mater. 47(11), 1377–1386 (2013)10.1177/0021998312447209 ↗
13. Wang, X., Tian, M., Chen, X., Xie, P., Yang, J., Chen, J., Yang, W.: Advances on materials design and manufacture technology of plastic liner of type IV hydrogen storage vessel. Int. J. Hydrogen Energy 47(13), 8382–8408 (2022)10.1016/j.ijhydene.2021.12.198 ↗
14. Li, W., Lv, H., Zhang, L., He, P., Zhang, C.: Experiment, simulation, optimization design, and damage detection of composite shell of hydrogen storage vessel-a review. J. Reinf. Plast. Compos. 42(11–12), 507–536 (2023)10.1177/07316844221132744 ↗
15. Ashrith, H.S., Jeevan, T.P., Xu, J.: A review on the fabrication and mechanical characterization of fibrous composites for engineering applications. J. Composites Sci. 7(6), 252 (2023)10.3390/jcs7060252 ↗
16. Han, H., Xia, Y., Ha, S.K.: Characterization of fatigue properties of fiber-reinforced polymer composites based on a multiscale approach. Polymers, 17(2) (2025)10.3390/polym17020157 ↗
17. Mulky, L., Srivastava, S., Lakshmi, T., Sandadi, E.R., Gour, S., Thomas, N.A., Priya, S.S., Sudhakar, K.: An overview of hydrogen storage technologies - key challenges and opportunities. Mater. Chem. Phys. 325, 129710 (2024)10.1016/j.matchemphys.2024.129710 ↗
18. Ueda, M., Hidaka, T., Ichihara, N., Yang, H., Iwase, W., Matsuda, T., Morita, N., Aoki, R., Yokozeki, T.: Voids in type-IV composite pressure vessels manufactured by a dry filament-winding process. Int. J. Press. Vessels Pip. 208, 105154 (2024)10.1016/j.ijpvp.2024.105154 ↗
19. Liao, B.B., Wang, D.L., Hamdi, M., Zheng, J.Y., Jiang, P., Gu, C.H., Hong, W.R.: Acoustic emission-based damage characterization of 70 MPa type IV hydrogen composite pressure vessels during hydraulic tests. Int. J. Hydrogen Energy 44, 03 (2019)
20. Feki, I., Shirinbayan, M., Nouira, S., Heripre, E., Tie Bi, R., Maeso, J.B., Thomas, C., Fitoussi, J.: Multi-scale experimental investigation of porosity-induced damage effects in filament-wound carbon fiber reinforced epoxy composites used in hydrogen storage tanks. Polym. Compos. 46(3), 2532–2544 (2025)10.1002/pc.29121 ↗
21. Pan, J., Zhu, C., Hu, J., Zhu, X., Yang, J., Guo, Y., Tan, L.: Detection of void and crack defects in type IV hydrogen storage vessels by microwave technique. J. Physics Conf. Series 2468(012101), 04 (2023)
22. Pan, J., Zhu, C., Jian, H., Zhu, X., Yang, J., Guo, Y., Tan, L.: Identifying void and crack defects in type III hydrogen storage vessels based on microwave inspection. J. Phys: Conf. Ser. 2468(1), 012081 (2023)
23. Ge, L., Zhao, J., Li, H., Dong, J., Geng, H., Lei, Z., Lin, S., Jia, X., Yang, X.: A three-dimensional progressive failure analysis of filament-wound composite pressure vessels with void defects. Thin-Walled Structures 199, 111858 (2024)
24. Nimdum, P., Patamaprohm, B., Renard, J., Villalonga, S.: Experimental method and numerical simulation demonstrate non-linear axial behaviour in composite filament wound pressure vessel due to thermal expansion effect. Int. J. Hydrogen Energy 40(38), 13231–13241 (2015)10.1016/j.ijhydene.2015.05.068 ↗
25. Bo, K., Feng, H., Jiang, Y., Deng, G., Wang, D., Zhang, Y.: Study of blister phenomena on polymer liner of type IV hydrogen storage cylinders. Int. J. Hydrogen Energy 54, 922–936 (2024)10.1016/j.ijhydene.2023.09.146 ↗
26. Cheng, Q., Zhang, R., Shi, Z., Lin, J.: Review of common hydrogen storage tanks and current manufacturing methods for aluminium alloy tank liners. International Journal of Lightweight Materials and Manufacture 7(2), 269–284 (2024)10.1016/j.ijlmm.2023.08.002 ↗
27. Chen, R., Zheng, J., Xu, P., Kai, F., Liu, P.: Hydrogen embrittlement of metallic materials in high-pressure hydrogen at normal temperature. Taiyangneng Xuebao/Acta Energiae Solaris Sinica 29(04), 502–508 (2008)
28. Muhammed, N.S., Gbadamosi, A.O., Epelle, E.I., Abdulrasheed, A.A., Haq, B., Patil, S., Al-Shehri, D., Kamal, M.S.: Hydrogen production, transportation, utilization, and storage: Recent advances towards sustainable energy. J. Energy Storage 73, 109207 (2023)10.1016/j.est.2023.109207 ↗
29. Okonkwo, P.C., Belgacem, I.B., Mansir, I.B., Aliyu, M., Emori, W., Uzoma, P.C., Beitelmal, W.H., Akyüz, E., Radwan, A.B., Shakoor, R.A.: A focused review of the hydrogen storage tank embrittlement mechanism process. Int. J. Hydrogen Energy 48(35), 12935–12948 (2023)10.1016/j.ijhydene.2022.12.252 ↗
30. Pepin, J., Lainé, E., Grandidier, J.-C., Castagnet, S., Blanc-vannet, P., Papin, P., Weber, M.: Determination of key parameters responsible for polymeric liner collapse in hyperbaric type IV hydrogen storage vessels. Int. J. Hydrogen Energy 43(33), 16386–16399 (2018)10.1016/j.ijhydene.2018.06.177 ↗
31. Qi, Z., Shi, H., Hua, Z., Yang, M., Peng, W.: Hydrogen permeation behavior of the liner of type IV hydrogen storage cylinders under different pressures. 11 (2024)10.1115/PVP2024-123342 ↗
32. Li, X., Huang, Q., Liu, Y., Zhao, B., Li, J.: Review of the hydrogen permeation test of the polymer liner material of type IV on-board hydrogen storage cylinders. Materials, 16(15) (2023)10.3390/ma16155366 ↗
33. Błachut, A., Wollmann, T., Panek, M., Vater, M., Kaleta, J., Detyna, J., Hoschützky, S., Gude, M.: Influence of fiber tension during filament winding on the mechanical properties of composite pressure vessels. Compos. Struct. 304, 116337 (2023)10.1016/j.compstruct.2022.116337 ↗
34. Moskvichev, E.: Numerical modeling of stress-strain behavior of composite overwrapped pressure vessel. Procedia Structural Integrity, 2:2512–2518 (2016). 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy10.1016/j.prostr.2016.06.314 ↗
35. Liu, W., Zhang, L., Geng, C., Yu, Z., Ruan, B.: Liner damage analysis for hydrogen storage vessels subjected to local compressive loads using the submodeling method. Chinese J. Mech. Eng. 37, 12 (2024)10.1186/s10033-024-00994-x ↗
36. Harada, S., Arai, Y., Araki, W., Iijima, T., Kurosawa, A., Ohbuchi, T., Sasaki, N.: A simplified method for predicting burst pressure of type III filament-wound cfrp composite vessels considering the inhomogeneity of fiber packing. Compos. Struct. 190, 79–90 (2018)10.1016/j.compstruct.2018.02.011 ↗
37. Motaharinejad, V., Delnaud, L., Fouque, M., Lucas, A., Shirinbayan, M., Fitoussi, J., Tcharkhtchi, A.: Enhancement of adhesion between the polymeric liner and the metallic connector of high-pressure hydrogen storage tank. Int. J. Material For. 14, 03 (2021)
38. Sharma, P., Neogi, S.: Performance-based design and manufacturing of filament wound type-4 cylinders for compressed gas storage. Compos. Struct. 309, 116710 (2023)
39. Lin, S., Yang, L., Hui, X., Jia, X., Yang, X., Lei, Z.: Progressive damage analysis for multiscale modelling of composite pressure vessels based on puck failure criterion. Compos. Struct. 255, 113046 (2021)
40. Parvizi, A., Bailey, J.E.: On multiple transverse cracking in glass fibre epoxy cross-ply laminates. J. Mater. Sci. 13, 2131–2136 (1978)10.1007/BF00541666 ↗
41. Bertin, M., Touchard, F., Lafarie-Frenot, M.C.: Experimental study of the stacking sequence effect on polymer/composite multi-layers submitted to thermomechanical cyclic loadings. Int. J. Hydrogen Energy, 35(20), 11397–11404 (2010). Hyceltec 2009 Conference10.1016/j.ijhydene.2010.07.018 ↗
42. Jiang, L., Ulven, C., Gutschmidt, D., Anderson, M., Balo, S., Lee, M., Vigness, J.: Recycling carbon fiber composites using microwave irradiation: Reinforcement study of the recycled fiber in new composites. J. Appl. Polym. Sci. 132, 07 (2015)
43. Shokrieh, M.M., Omidi, M.J.: Tension behavior of unidirectional glass/epoxy composites under different strain rates. Compos. Struct. 88(4), 595–601 (2009)10.1016/j.compstruct.2008.06.012 ↗
44. Vu, D.Q., Gigliotti, M., Lafarie-Frenot, M.C.: The effect of thermo-oxidation on matrix cracking of cross-ply [0/90]s composite laminates. Compos. A Appl. Sci. Manuf. 44, 114–121 (2013)10.1016/j.compositesa.2012.08.013 ↗
45. Lv, H., Chen, G., Gao, X., Qiming, X., Zhao, Y., Shen, S., Xia, L., Zhang, G., Kun, H.: Study on the methodology for evaluating the filling quality of type III hydrogen storage cylinders. Int. J. Hydrogen Energy 48(94), 36825–36835 (2023)10.1016/j.ijhydene.2023.06.012 ↗
46. Pourahmadi, E., Shadmehri, F., Ganesan, R.: Interlaminar shear strength of carbon/peek thermoplastic composite laminate: Effects of in-situ consolidation by automated fiber placement and autoclave re-consolidation. Compos. B Eng. 269, 111104 (2024)10.1016/j.compositesb.2023.111104 ↗
47. Tang, J., Shi, S., Dai, H., Jiaqi, H., Guo, C., Chen, X.: On the role of hydrogen in the stress corrosion cracking behavior of Q345R steel in HF vapor environment. Int. J. Hydrogen Energy 48(73), 28549–28566 (2023)10.1016/j.ijhydene.2023.04.027 ↗
48. Zhou, Y., Han, B., Liu, Y., Shi, W., Liu, Y., Li, B., Chen, L., Liu, P.: Comparative analysis of impact damage and residual burst pressure of type III and type IV hydrogen storage cylinders. Int. J. Hydrogen Energy 98, 370–383 (2025)10.1016/j.ijhydene.2024.11.211 ↗
49. Hu, J., Chandrashekhara, K.: Fracture analysis of hydrogen storage composite cylinders with liner crack accounting for autofrettage effect. Int. J. Hydrogen Energy 34(8), 3425–3435 (2009)10.1016/j.ijhydene.2009.01.094 ↗
50. Zhu, J., Li, Y., Cao, W., Li, Y., Gao, Z.: Failure analysis of novel boss structures for type IV hydrogen storage vessels. Energies, 16(10) (2023)10.3390/en16104005 ↗
51. Meng, Z., Jin, S., Yu, M., Mehari, A., Jiang, L.: Analysis of the boss structure of type IV composite vessel for a high-pressure hydrogen tube trailer. Sustainability, 16(12) (2024)10.3390/su16125098 ↗
52. Jin, Z., Su, Y., Lv, H., Liu, M., Li, W., Zhang, C.: Review of decompression damage of the polymer liner of the type IV hydrogen storage tank. Polymers, 15(10) (2023)10.3390/polym15102258 ↗
53. Sapre, S., Pareek, K.: Investigation of structural stability of type IV compressed hydrogen storage tank during refueling of fuel cell vehicle. Energy Storage 2, 03 (2020)10.1002/est2.150 ↗
54. Bouhala, L., Koutsawa, Y., Karatrantos, A., Bayreuther, C.: Design of type-iv composite pressure vessel based on comparative analysis of numerical methods for modeling type-III vessels. J. Composit. Sci., 8(2) (2024)10.3390/jcs8020040 ↗
55. Yang, X., Zhan, L., Jiang, C., Zhao, X., Guan, C., Chang, T.: Evaluating random vibration assisted vacuum processing of carbon/epoxy composites in terms of interlaminar shear strength and porosity. J. Compos. Mater. 53(17), 2367–2376 (2019)10.1177/0021998319829531 ↗
56. Turner, J., Lippert, D., Seo, D., Grasinger, M., George, A.: Effect of wettability on the void formation during liquid infusion into fibers. Polym. Compos. 45(16), 14931–14942 (2024)10.1002/pc.28811 ↗
57. do Nascimento, A.M., de Souza, R.E., Silva, S.G.: Fragilização por hidrogênio em barras de aço de alta resistência: um estudo de caso. In: Anais do 71° Congresso Anual da ABM – Internacional e 16° Encontro Nacional de Estudantes de Engenharia Metalúrgica. de Materiais e de Minas – ENEMET, vol. 71, pp. 313–320. RJ, Brasil, Rio de Janeiro (2016)10.5151/1516-392X-27594 ↗
58. Dadfarnia, M., Novak, P., Ahn, D.C., Liu, J.B., Sofronis, P., Johnson, D.D., Robertson, I.M.: Recent advances in the study of structural materials compatibility with hydrogen. Advanced materials (Deerfield Beach, Fla.), 22(03), 1128–35 (2010)10.1002/adma.200904354 ↗
59. Chen, Y., Zhao, S., Ma, H., Wang, H., Hua, L., Fu, S.: Analysis of hydrogen embrittlement on aluminum alloys for vehicle-mounted hydrogen storage tanks: A review. Metals, 11(8) (2021)10.3390/met11081303 ↗
60. Reda, R., Ashraf, A., Magdy, I., Ragab, M., Eldabaa, N., Abo Elmagd, M., Abdelhafiz, M., El-Banna, O., Fouad, A., Aly, H.A., Tlija, M.: Elshaghoul. An investigation on the potential of utilizing aluminum alloys in the production and storage of hydrogen gas. Materials, 17(16) (2024)10.3390/ma17164032 ↗
61. Drichel, A., Spiewak, M., Röttger, A., Lützenkirchen- Hecht, D., Rodrigues, B.V.M., Slabon, A.: Hydrogen economy vs. hydrogen embrittlement: Indirect electrochemical determination of hydrogen diffusion in steel (2024). Preprint, not peer-reviewed10.26434/chemrxiv-2024-x99z8 ↗
62. Figueredo, R.M., de Oliveira, M.C., de Paula, L.J., Acciari, H.A., Codaro, E.N.: Um estudo comparativo da fragilização pelo hidrogênio dos aços carbono api 5l b e x52ms. In Anais do 72° Congresso Anual da ABM – ABM WEEK 2017, pages 143–154, São Paulo, (2017). ABM10.5151/1516-392X-30112 ↗
63. Santos, M., Maciel, T., Santana, R.: Uma contribuição para o entendimento da influência das tensõões residuais na fragilização por hidrogênio em aços api 5l. Soldagem & Inspeção, 27 (2022)10.1590/0104-9224/si27.17 ↗
64. Pengfei, B., Ruan, W.: Simulation analysis of composite axial tensile failure considering fiber strength dispersion. J. Phys: Conf. Ser. 2660(1), 012040 (2023)
65. Papula, S., Saukkonen, T., Talonen, J., Hänninen, H.: Delayed cracking of metastable austenitic stainless steels after deep drawing. ISIJ Int. 55(10), 2182–2188 (2015)10.2355/isijinternational.ISIJINT-2015-078 ↗
66. Han, Y., Luo, J., Fu, A., Yin, C.: Hydrogen sulfide stress cracking in a Q345R welded joint. Mater. Sci. Forum 1035, 486–491 (2021)10.4028/www.scientific.net/MSF.1035.486 ↗
67. Papula, S., Sarikka, T., Anttila, S., Talonen, J., Virkkunen, I., Hänninen.: Hydrogen-induced delayed cracking in trip-aided lean-alloyed ferritic-austenitic stainless steels. Materials, 10(6) (2017)10.3390/ma10060613 ↗
68. Xue, L., Deng, J., Wang, X., Wang, Z., Liu, B.: Numerical simulation and optimization of rapid filling of high-pressure hydrogen storage cylinder. Energies, 15(14) (2022)10.3390/en15145189 ↗
69. Zumelzu, E., Ortega, C., Rull, F., Cabezas, C.: Physicochemical and structural effects of electrolyte-induced delamination on polyethylene teraphthalate-coated steel plates. J. Appl. Polym. Sci. 123(3), 1658–1666 (2012)10.1002/app.34588 ↗
70. Alin, C., Shengtao, Z., Qingjun, Z., Baorong, H.: Stray current delamination of an organic coating on metallic structures. Mater. Performance 50(01), 29–33 (2011)10.5006/MP2011_50_1-29 ↗
71. LLorca, J., González, C., Molina-Aldareguía, J.M., Segurado, J., Seltzer, R., Sket, F., Rodríguez, M., Sádaba, S., Muñoz, R., Canal, L.P.: Multiscale modeling of composite materials: a roadmap towards virtual testing. Adv. Materials, 23(44), 5130–5147 (2011)10.1002/adma.201101683 ↗
72. Lee, C.S., Kim, J.H., Kim, S.K., Ryu, D.M., Lee, J.M.: Initial and progressive failure analyses for composite laminates using puck failure criterion and damage-coupled finite element method. Compos. Struct. 121, 406–419 (2015)10.1016/j.compstruct.2014.11.011 ↗
73. Sezgin, J.-G., Bosch, C., Montouchet, A., Perrin, G., Wolski, K.: Modelling of hydrogen induced pressurization of internal cavities. Int. J. Hydrogen Energy 42(22), 15403–15414 (2017)10.1016/j.ijhydene.2017.04.106 ↗
74. Mohammed, O., Kareem, A.K., Jamian, S., Nemah, M.N.: Distribution of mode i stress intensity factors for single circumferential semi-elliptical crackin thick cylinder. Int. J. Integ. Eng. 11, 08 (2019)
75. Zhou, W., Wang, J., Pan, Z.B., Liu, J., Ma, L.H., Zhou, J.Y., Su, Y.F.: Review on optimization design, failure analysis and non-destructive testing of composite hydrogen storage vessel. Int. J. Hydrogen Energy 47(91), 38862–38883 (2022)10.1016/j.ijhydene.2022.09.028 ↗
76. Kang, H., He, P., Zhang, C., Dai, Y., Lv, H., Zhang, M., Yang, D.: Stress–strain and burst failure analysis of fiber wound composite material high-pressure vessel. Polym. Polym. Compos. 29(8), 1291–1303 (2021)
77. Maizai, A., Hocine, A., Ghouaoula, A., Hadj Meliani, M.: Numerical simulation of failure probability prediction: Application to cylindrical part of type III cng storage vessel. Recueil de mécanique 3(1), 245–253 (2018)
78. Khetre, S.N., Nitnaware, P.T., Meshram, A.: Design and analysis of composite high pressure vessel with different layers using fea. International Journal of Engineering Research & Technology (IJERT), 3(11), 1460–1464 (2014). ISSN: 2278-0181
79. Xu, P., Zheng, J.Y., Liu, P.F.: Finite element analysis of burst pressure of composite hydrogen storage vessels. Materials & Design 30(7), 2295–2301 (2009)10.1016/j.matdes.2009.03.006 ↗
80. Reda, R., Ataya, S., Ashraf, A.: Finite element modeling of different types of hydrogen pressure vessels under extreme conditions for space applications. Processes, 13(5) (2025)10.3390/pr13051429 ↗
81. Kumar, G.C., Baligidad, S.M., Maharudresh, A.C., Dayanand, N.: Analysis of composite pressure vessel and composite overwrapped pressure vessel by analytical and finite elemental approach. Materials Today: Proceedings 2nd International Conference on Functional Material, Manufacturing and Performances (ICFMMP-2021), 50, 1726–1731 (2022)10.1016/j.matpr.2021.09.174 ↗
82. Sharma, P., Sharma, S., Bera, T., Semwal, K., Badhe, R.M., Sharma, A., Kapur, G.S., Ramakumar, S.S.V., Neogi, S.: Effects of dome shape on burst and weight performance of a type-3 composite pressure vessel for storage of compressed hydrogen. Compos. Struct. 293, 115732 (2022)10.1016/j.compstruct.2022.115732 ↗
83. Sharma, P., Sardar, H.H., Neogi, S.: Thermomechanical processing of type-4 composite cylinders under static load. J. Energy Storage 55, 105465 (2022)
84. Gray, D., Moser, D.: Finite Element Analysis of a Composite Overwrapped Pressure Vessel (2004)10.2514/6.2004-3506 ↗
85. Air, A., Oromiehie, E., Prusty, B.G.: Design and manufacture of a type v composite pressure vessel using automated fibre placement. Compos. B Eng. 266, 111027 (2023)
86. Siddiqui, M.J., Balguri, P.K., Haripriya, K., Rajendran, A.R., Patil, I.V.: Analysis of type IV hydrogen pressure vessel with s-glass, carbon fiber t700 and kevlar composite materials. Materials Today: Proceedings, (2023)10.1016/j.matpr.2023.09.036 ↗
87. Weerts, R.A.J., Cousigné, O., Kunze, K., Geers, M.G.D., Remmers, J.J.C.: A methodological approach to model composite overwrapped pressure vessels under impact conditions. Compos. Struct. 276, 114482 (2021)
88. Eko, A.J., Epaarachchi, J., Jewewantha, J., Zeng, X.: A review of type IV composite overwrapped pressure vessels. Int. J. Hydrogen Energy 109, 551–573 (2025)10.1016/j.ijhydene.2025.02.108 ↗
89. Dadashzadeh, M., Kashkarov, S., Makarov, D., Molkov, V.: Risk assessment methodology for onboard hydrogen storage. Int. J. Hydrogen Energy 43(12), 6462–6475 (2018)10.1016/j.ijhydene.2018.01.195 ↗
90. Wang, L., Wang, B., Wei, S., Hong, Y., Zheng, C.: Prediction of long-term fatigue life of cfrp composite hydrogen storage vessel based on micromechanics of failure. Compos. B Eng. 97, 274–281 (2016)10.1016/j.compositesb.2016.05.012 ↗
91. Bulletti, A., Giannelli, P., Calzolai, M., Capineri, L.: An integrated acousto/ultrasonic structural health monitoring system for composite pressure vessels. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 63(6), 864–873 (2016)10.1109/TUFFC.2016.2545716 ↗
92. Jinying, W., Wang, R., Liu, R., Zhang, Z.: The development status of composite materials and winding process of typeIVhydrogen storage cylinder. Int. J. Auto. Manu. Materials 4(1), 4 (2025)
93. Li, F.D., Chen, X.D., Peng, X., Fan, Z.C., Wang, Q., Lyu, C.S., Zhang, Q., Hao, Yu., HengAn, W.: Optimal design of thin-layered composites for type IV vessels: Finite element analysis enhanced by ann. Thin-Walled Structures 187, 110752 (2023)
94. Saha, P., Hossain, M.F., Rana, M.S., Ferdous, M.S.: Numerical modeling of kevlar/jute fiber and hybrid composite pressure vessels. Carbon Trends 13, 100304 (2023)10.1016/j.cartre.2023.100304 ↗
95. Zhengyun, H., Chen, M., Pan, B.: Simulation and burst validation of 70 MPa type IV hydrogen storage vessel with dome reinforcement. Int. J. Hydrogen Energy 46(46), 23779–23794 (2021)10.1016/j.ijhydene.2021.04.186 ↗
96. Zhengyun, H., Chen, M.H., Lei, Z., Jia, X., Shen, A., Yang, Q., Ke, X.: Investigation on failure behaviors of 70 MPa type IV carbon fiber overwound hydrogen storage vessels. Compos. Struct. 259, 113387 (2021)
97. Nebe, M., Soriano, A., Braun, C., Middendorf, P., Walther, F.: Analysis on the mechanical response of composite pressure vessels during internal pressure loading: Fe modeling and experimental correlation. Compos. B Eng. 212, 108550 (2021)10.1016/j.compositesb.2020.108550 ↗
98. Zhang, Q., Hui, X., Jia, X., Lei, Z., Cheng, S., Wang, H.: Design of a 70 MPa type IV hydrogen storage vessel using accurate modeling techniques for dome thickness prediction. Compos. Struct. 236, 111915 (2020)
99. Villalonga, S., Thomas, C., Nony, C., Thiebaud, F., Geli, M., Lucas, A., Knobloch, K., Maugy, C.: Application of full thermoplastic composite for type IV 70 MPa high pressure vessels, (2011)
100. Halm, D., Fouillen, F., Lainé, E., Gueguen, M., Bertheau, D., van Eekelen, T.: Composite pressure vessels for hydrogen storage in fire conditions: Fire tests and burst simulation. Int. J. Hydrogen Energy 42(31), 20056–20070 (2017)10.1016/j.ijhydene.2017.06.088 ↗