A Multiphysics Approach for Predicting Residual Stress Development in Filament Wound Composites Considering Fiber Volume Fraction Evolution
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Fiber-reinforced polymer composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Jia, Y., Yan, W., Liu, H.-Y.: Carbon fibre pullout under the influence of residual thermal stresses in polymer matrix composites. Comput. Mater. Sci. (2012). https://doi.org/10.1016/j.commatsci.2012.05.01910.1016/j.commatsci.2012.05.019 ↗
2. Vasiliev, V., Krikanov, A., Razin, A.: New generation of filament-wound composite pressure vessels for commercial applications. Compos. Struct. (2003). https://doi.org/10.1016/j.compstruct.2003.09.01910.1016/j.compstruct.2003.09.019 ↗
3. Wang, R., Jiao, W., Liu, W., Yang, F., He, X.: Slippage coefficient measurement for non-geodesic filament-winding process. Composites Part A: Applied Science and Manufacturing (2011). https://doi.org/10.1016/j.compositesa.2010.12.00210.1016/j.compositesa.2010.12.002 ↗
4. Munro, M.: Review of manufacturing of fiber composite components by filament winding. Polym. Compos. (1988). https://doi.org/10.1002/pc.75009050810.1002/pc.750090508 ↗
5. Zu, L., Xu, H., Zhang, B., Li, D., Zi, B.: Design of filament-wound composite structures with arch-shaped cross sections considering fiber tension simulation. Compos. Struct. (2018). https://doi.org/10.1016/j.compstruct.2018.04.01810.1016/j.compstruct.2018.04.018 ↗
6. Yang, L., Yan, Y., Ma, J., Liu, B.: Effects of inter-fiber spacing and thermal residual stress on transverse failure of fiber-reinforced polymer–matrix composites. Comput. Mater. Sci. (2013). https://doi.org/10.1016/j.commatsci.2012.09.02710.1016/j.commatsci.2012.09.027 ↗
7. Gong, J., Saeed, N., Huang, X., Tian, W., Li, L., Song, J.: Influences of fiber volume content on the mechanical properties of 2d plain carbon-fiber woven composite materials. Polymers. (2023). https://doi.org/10.3390/polym1601010810.3390/polym16010108 ↗
8. Yildizhan, S., Mohanam, A., Jambulingam, R., Gavande, V., Lee, W.-K.: Experimental study on the effects of thermal cycling and moisture exposure on mechanical properties of alkali treated woven jute fiber/epoxy composites. Appl. Compos. Mater. (2025). https://doi.org/10.1007/s10443-025-10334-410.1007/s10443-025-10334-4 ↗
9. Zhao, L., Mantell, S.C., Cohen, D.: Finite element modeling of the filament winding process. Compos. Struct. (2001). https://doi.org/10.1016/S0263-8223(01)00039-310.1016/S0263-8223(01)00039-3 ↗
10. Lee, S.-Y., Springer, G.S.: Filament winding cylinders: I. Process model. J. Compos. Mater. (1990). https://doi.org/10.1177/00219983900240120210.1177/002199839002401202 ↗
11. Calius, E.P., Lee, S.-Y., Springer, G.S.: Filament winding cylinders: Ii. Validation of the process model. J. Compos. Mater. (1990). https://doi.org/10.1177/00219983900240120310.1177/002199839002401203 ↗
12. Lee, S.-Y., Springer, G.S.: Filament winding cylinders: Iii. Selection of the process variables. J. Compos. Mater. (1990). https://doi.org/10.1177/00219983900240120410.1177/002199839002401204 ↗
13. Gutowski, T.G., Morigaki, T., Cai, Z.: The consolidation of laminate composites. J. Compos. Mater. (1987). https://doi.org/10.1177/00219983870210020710.1177/002199838702100207 ↗
14. Gutowski, T.G., Cai, Z., Bauer, S., Boucher, D., Kingery, J., Wineman, S.: Consolidation experiments for laminate composites. J. Compos. Mater. (1987). https://doi.org/10.1177/00219983870210070510.1177/002199838702100705 ↗
15. Cai, Z., Gutowski, T.: The 3-d deformation behavior of a lubricated fiber bundle. J. Compos. Mater. (1992). https://doi.org/10.1177/00219983920260080810.1177/002199839202600808 ↗
16. Cai, Z., Gutowski, T., Allen, S.: Winding and consolidation analysis for cylindrical composite structures. J. Compos. Mater. (1992). https://doi.org/10.1177/00219983920260090810.1177/002199839202600908 ↗
17. Bogetti, T.A., Gillespie, J.W., Jr.: Process-induced stress and deformation in thick-section thermoset composite laminates. J. Compos. Mater. (1992). https://doi.org/10.1177/00219983920260050210.1177/002199839202600502 ↗
18. Bogetti, T.A., Gillespie, J.W., Jr.: Two-dimensional cure simulation of thick thermosetting composites. J. Compos. Mater. (1991). https://doi.org/10.1177/00219983910250030210.1177/002199839102500302 ↗
19. Dave, R., Kardos, J.: A model for resin flow during composite processing: Part 1—general mathematical development. Polym. Compos. (1987). https://doi.org/10.1002/pc.75008010610.1002/pc.750080106 ↗
20. Wang, Q., Li, T., Wang, B., Liu, C., Huang, Q., Ren, M.: Prediction of void growth and fiber volume fraction based on filament winding process mechanics. Compos. Struct. (2020). https://doi.org/10.1016/j.compstruct.2020.11243210.1016/j.compstruct.2020.112432 ↗
21. Dai, J., Xi, S., Li, D.: Numerical analysis of curing residual stress and deformation in thermosetting composite laminates with comparison between different constitutive models. Materials. (2019). https://doi.org/10.3390/ma1204057210.3390/ma12040572 ↗
22. Wang, Q., Yang, X., Zhang, X., Chang, X., Yap, M., Chen, Z., Ren, M.: Effect of cure cycles on residual stresses in Thick composites using multi-physics coupled analysis with multiple constitutive models. Mater. Today Commun. (2022). https://doi.org/10.1016/j.mtcomm.2022.10409410.1016/j.mtcomm.2022.104094 ↗
23. Syed, Z.A.H., Che, J., Chang, S.-H.: Design of a type-iii hydrogen pressure vessel with an elliptical dome for stress reduction in the composite layer. Int. J. Hydrogen Energy. (2025). https://doi.org/10.1016/j.ijhydene.2025.01.21510.1016/j.ijhydene.2025.01.215 ↗
24. Fan, S., Zhang, J., Wang, B., Chen, J., Yang, W., Liu, W., Li, Y.: A deep learning method for fast predicting curing process-induced deformation of aeronautical composite structures. Compos. Sci. Technol. (2023). https://doi.org/10.1016/j.compscitech.2022.10984410.1016/j.compscitech.2022.109844 ↗
25. Cohen, D., Mantell, S.C., Zhao, L.: The effect of fiber volume fraction on filament wound composite pressure vessel strength. Compos. B Eng. (2001). https://doi.org/10.1016/S1359-8368(01)00009-910.1016/S1359-8368(01)00009-9 ↗
26. Banerjee, A., Sun, L., Mantell, S., Cohen, D.: Model and experimental study of fiber motion in wet filament winding. Compos. Part A: Appl. Sci. Manufac. (1998). https://doi.org/10.1016/S1359-835X(97)00091-210.1016/S1359-835X(97)00091-2 ↗
27. Patham, B., Huang, X.: Multiscale modeling of residual stress development in continuous fiber-reinforced unidirectional Thick thermoset composites. J. Compos. (2014). https://doi.org/10.1155/2014/17256010.1155/2014/172560 ↗
28. Lu, L., Huan, S., Lu, M., Shen, T., Tian, Y., Hu, J., Du, J., Zhang, M.: Three-dimensional thermo–chemo–mechanical coupled curing analysis for the filament wound composite shell. Polymers. (2024). https://doi.org/10.3390/polym1612164310.3390/polym16121643 ↗
29. Wang, B., Fan, S., Chen, J., Yang, W., Liu, W., Li, Y.: A review on prediction and control of curing process-induced deformation of continuous fiber-reinforced thermosetting composite structures. Composites Part A: Applied Science and Manufacturing (2023). https://doi.org/10.1016/j.compositesa.2022.10732110.1016/j.compositesa.2022.107321 ↗
30. Hou, J., You, B., Xu, J., Fu, T., Wang, T.: Numerical simulation and multi-objective optimization for curing process of thermosetting prepreg. Appl. Compos. Mater. (2022). https://doi.org/10.1007/s10443-022-10022-710.1007/s10443-022-10022-7 ↗
31. Yuan, Z., Wang, Y., Yang, G., Tang, A., Yang, Z., Li, S., Li, Y., Song, D.: Evolution of curing residual stresses in composite using multi-scale method. Compos. B Eng. (2018). https://doi.org/10.1016/j.compositesb.2018.08.01210.1016/j.compositesb.2018.08.012 ↗
32. Zhi, J., Yang, B., Li, Y., Tay, T.-E., Tan, V.B.C.: Multiscale thermo-mechanical analysis of cure-induced deformation in composite laminates using direct fe2. Compos. Part A: Appl. Sci. Manufac. (2023). https://doi.org/10.1016/j.compositesa.2023.10770410.1016/j.compositesa.2023.107704 ↗
33. Zhang, G., Wang, J., Ni, A., Li, S.: Process-induced residual stress of variable-stiffness composite laminates during cure. Compos. Struct. (2018). https://doi.org/10.1016/j.compstruct.2018.07.04010.1016/j.compstruct.2018.07.040 ↗
34. Błachut, A., Wollmann, T., Panek, M., Vater, M., Kaleta, J., Detyna, J., Hoschützky, S., Gude, M.: Influence of fiber tension during filament winding on the mechanical properties of composite pressure vessels. Compos. Struct. (2023). https://doi.org/10.1016/j.compstruct.2022.11633710.1016/j.compstruct.2022.116337 ↗
35. de Faria, H.Q.: Analytical and numerical modelling of the filament winding process, Universidade do Porto (Portugal), [Online]. (2013). Available: https://hdl.handle.net/10216/75861
36. Turner, D.Z., Hjelmstad, K.D.: Determining the 3d permeability of fibrous media using the newton method. Compos. B Eng. (2005). https://doi.org/10.1016/j.compositesb.2005.01.00910.1016/j.compositesb.2005.01.009 ↗
37. Davé, R.: A unified approach to modeling resin flow during composite processing. J. Compos. Mater. (1990). https://doi.org/10.1177/00219983900240010210.1177/002199839002400102 ↗
38. Li, M., Gu, Y., Zhang, Z., Sun, Z.: A simple method for the measurement of compaction and corresponding transverse permeability of composite prepregs. Polym. Compos. (2007). https://doi.org/10.1002/pc.2025510.1002/pc.20255 ↗
39. Lee, W.I., Loos, A.C., Springer, G.S.: Heat of reaction, degree of cure, and viscosity of Hercules 3501-6 resin. J. Compos. Mater. (1982). https://doi.org/10.1177/00219983820160060510.1177/002199838201600605 ↗
40. Wang, Q., Yang, X., Zhao, H., Zhang, X., Cao, G., Ren, M.: Microscopic residual stresses analysis and multi-objective optimization for 3d woven composites. Compos. Part A: Appl. Sci. Manufac. (2021). https://doi.org/10.1016/j.compositesa.2021.10631010.1016/j.compositesa.2021.106310 ↗
41. Johnston, A.A.: An integrated model of the development of process-induced deformation in autoclave processing of composite structures. University of British Columbia (1997)
42. Kim, Y.K., White, S.R.: Stress relaxation behavior of 3501-6 epoxy resin during cure. Polymer Engineering & Science (1996). https://doi.org/10.1002/pen.1068610.1002/pen.10686 ↗
43. Liu, X., Guan, Z., Wang, X., Jiang, T., Geng, K., Li, Z.: Study on cure-induced residual stresses and spring-in deformation of l-shaped composite laminates using a simplified constitutive model considering stress relaxation. Compos. Struct. (2021). https://doi.org/10.1016/j.compstruct.2021.11420310.1016/j.compstruct.2021.114203 ↗
44. Ding, A., Li, S., Wang, J., Ni, A., Zu, L.: A new path-dependent constitutive model predicting cure-induced distortions in composite structures. Composites Part A: Applied Science and Manufacturing (2017). https://doi.org/10.1016/j.compositesa.2016.11.03210.1016/j.compositesa.2016.11.032 ↗
45. Zobeiry, N., Vaziri, R., Poursartip, A.: Computationally efficient pseudo-viscoelastic models for evaluation of residual stresses in thermoset polymer composites during cure. Compos. Part A: Appl. Sci. Manufac. (2010). https://doi.org/10.1016/j.compositesa.2009.10.00910.1016/j.compositesa.2009.10.009 ↗
46. White, S.R., Kim, Y.K.: Process-induced residual stress analysis of as4/3501-6 composite material. Mechanics of Composite Materials and Structures an International Journal (1998). https://doi.org/10.1080/1075941980894589710.1080/10759419808945897 ↗
47. Abdelal, G.F., Robotham, A., Cantwell, W.: Autoclave cure simulation of composite structures applying implicit and explicit Fe techniques. Int. J. Mech. Mater. Des. (2013). https://doi.org/10.1007/s10999-012-9205-710.1007/s10999-012-9205-7 ↗
48. Loos, A.C., Springer, G.S.: Curing of epoxy matrix composites. J. Compos. Mater. (1983). https://doi.org/10.1177/00219983830170020410.1177/002199838301700204 ↗
49. Blest, D., Duffy, B., McKee, S., Zulkifle, A.K.: Curing simulation of thermoset composites. Composites Part A: Applied Science And Manufacturing (1999). https://doi.org/10.1016/S1359-835X(99)00032-910.1016/S1359-835X(99)00032-9 ↗
50. Jones, R.M.: Mechanics of composite materials. CRC (2018). https://doi.org/10.1201/978149871106710.1201/9781498711067 ↗