Understanding Failure Mechanisms of Overwrapped 3D-Printed Polymeric T-joints Joined To CFRP Laminates
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. ABAQUS Analysis: User’s Manual (V6.6), (2020)
2. Barzegar, M., et al.: Progressive Damage Analysis of an Adhesively Bonded Composite T-Joint under Bending, Considering Micro-Scale Effects of Fiber Volume Fraction of Adherends. Composite Structures 258, 113374 (2021)10.1016/j.compstruct.2020.113374 ↗
3. Chen, L., et al.: Understanding Multiple Parameters Affecting Static and Dynamic Performances of Composite Helical Springs. Journal of Materials Research and Technology 20, 532–550 (2022)10.1016/j.jmrt.2022.07.120 ↗
4. Benzeggagh, M.L., Kenane, M.: Measurement of Mixed-Mode Delamination Fracture Toughness of Unidirectional Glass/Epoxy Composites with Mixed-Mode Bending Apparatus. Composites Science and Technology 56(4), 439–449 (1996)10.1016/0266-3538(96)00005-X ↗
5. Camanho, P.P., et al.: Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials. Journal of Composite Materials 37(16), 1415–1438 (2003)10.1177/0021998303034505 ↗
6. Chen, L., et al.: Understanding Stiffness Degradation of Composite Helical Springs with Multi-Braided Layers under Impact. Composites Part A: Applied Science and Manufacturing 185, 108327 (2024)10.1016/j.compositesa.2024.108327 ↗
7. Bai, Y., et al.: Failure in Co-Cured composite joints enhanced with J-272 film. Compos. Commun. 44, 101762–101762 (2023)10.1016/j.coco.2023.101762 ↗
8. Wan, Y., et al.: Structural Enhancement and Repair of CFRP T-Joint by the Cross-Embedded SMA Wire. Composites Communications 41, 101634 (2023)10.1016/j.coco.2023.101634 ↗
9. Carvalho, P.M.D., et al.: Adhesively-Bonded T-Joint Cohesive Zone Analysis Using Dual-Adhesives. Procedia Structural Integrity 41, 24–35 (2022)10.1016/j.prostr.2022.05.005 ↗
10. Dahmen, V., et al.: Fabrication of hybrid composite T-Joints by Co-Curing with 3D printed dual cure epoxy. Compos. Part. B Eng. 183, 107728–107728 (2020)10.1016/j.compositesb.2019.107728 ↗
11. Pizzorni, M., et al.: Adhesive Bonding of 3D-Printed Short- and Continuous-Carbon-Fiber Composites: An Experimental Analysis of Design Methods to Improve Joint Strength. Composites Part B: Engineering 230, 109539 (2022)10.1016/j.compositesb.2021.109539 ↗
12. Wagih, A., et al.: 3D printed auxetic metal stiffener for lightweight metal–Composite T-Joints with high strength and toughness. Mater. Design. 241, 112963–112963 (2024)10.1016/j.matdes.2024.112963 ↗
13. Hisada, S., et al.: Cure-Induced strain and failure in deltoid of composite T-Joints. composites part. Appl. Sci. Manuf. 141, 106210–106210 (2020)10.1016/j.compositesa.2020.106210 ↗
14. Patel, R., Desai, C., Kushwah, S., Mangrola, M.H.: A review article on FDM process parameters in 3D printing for composite materials. Materials Today: Proceedings (2022). https://doi.org/10.1016/j.matpr.2022.02.38510.1016/j.matpr.2022.02.385 ↗
15. Hisada, S., et al.: Damage Tolerance Improvement of Composite T-Joint under Pull-up Conditions Using an Interlocking-Fiber-Based Crack Arrester. Composite Structures 253, 112792 (2020)10.1016/j.compstruct.2020.112792 ↗
16. Hu, H., et al.: Progressive Damage Behaviour Analysis and Comparison with 2D/3D Hashin Failure Models on Carbon Fibre–Reinforced Aluminium Laminates. Polymers 14, 2946 (2022)10.3390/polym14142946 ↗
17. Koricho, E.G., Giovanni, B.: An Experimental and Finite Element Study of the Transverse Bending Behaviour of CFRP Composite T-Joints in Vehicle Structures. Composites Part B: Engineering 79, 430–443 (2015)10.1016/j.compositesb.2015.05.002 ↗
18. Liu, Y., et al.: Failure mechanism and strength prediction model of T-Joint of composite sandwich structure. Metals. 11(8), 1197–1197 (2021)10.3390/met11081197 ↗
19. Liu, A., et al.: Structure Design and Performance Evaluation of Fibre Reinforced Composite Honeycombs: A Review. Applied Composite Materials 31, 2019–2045 (2024)10.1007/s10443-024-10281-6 ↗
20. May, M., et al.: Analysis of Composite T-Joint Designs for Enhanced Resistance to Hydrodynamic Ram. Composite Structures 125, 188–194 (2015)10.1016/j.compstruct.2015.02.012 ↗
21. Neumeister, J., et al.: The Effect of Fiber Architecture on the Mechanical Properties of Carbon/Carbon Fiber Composites. Acta Materialia 44(2), 573–585 (1996)10.1016/1359-6454(95)00184-0 ↗
22. Anyfantis, K.N., Nicholas, G.T.: A novel Traction–Separation law for the prediction of the mixed mode response of ductile adhesive joints. Int. J. Solids Struct. 49(1), 213–226 (2012)10.1016/j.ijsolstr.2011.10.001 ↗
23. Panigrahi, S.K., Pradhan, B.: Delamination Damage Analyses of FRP Composite Spar Wingskin Joints with Modified Elliptical Adhesive Load Coupler Profile. Applied Composite Materials 15(4–6), 189–205 (2008)10.1007/s10443-008-9067-1 ↗
24. Pejkowski, Ł, et al.: Mechanical Performance of Non-Reinforced, Carbon Fiber Reinforced and Glass Bubbles Reinforced 3D Printed PA12 Polyamide. Polymer Testing 118, 107891 (2023)10.1016/j.polymertesting.2022.107891 ↗
25. Davila, C., Camanho, P.: Analysis of the effects of residual strains and defects on Skin/Stiffener debonding using decohesion elements. 44th AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dynamics Mater. Conf. (2003). https://doi.org/10.2514/6.2003-146510.2514/6.2003-1465 ↗
26. Sluys, L.J., Hallett, S.R., Wisnom, M.R.: Computational modeling of complex failure mechanisms in laminates. 46(5), pp.603–623. (2012). https://doi.org/10.1177/002199831141047310.1177/0021998311410473 ↗
27. Raj, S.A., et al.: A Case Study of 3D Printed PLA and Its Mechanical Properties. Materials Today: Proceedings 5(5), 11219–11226 (2018)
28. Safdar, M., et al.: Numerical study on shear strength of GFRP-RC T-Joints. Structures. 43, 926–943 (2022)10.1016/j.istruc.2022.07.017 ↗
29. Budhe, S., et al.: Effect of Surface Roughness Using Different Adherend Materials on the Adhesive Bond Strength. Applied Adhesion Science 3(1), 20 (2015)10.1186/s40563-015-0050-4 ↗
30. Shah, A., et al.: Pull-off behavior of stitched composite T-Joints. Compos. B Eng., 111911–111911 (2024)10.1016/j.compositesb.2024.111911 ↗
31. Trask, R.S., et al.: Influence of Process Induced Defects on the Failure of Composite T-Joint Specimens. Composites Part A: Applied Science and Manufacturing 43(4), 748–757 (2012)10.1016/j.compositesa.2011.12.021 ↗
32. Bencherif, N., Benhaliliba, M.A.: A Hashin Criteria Investigation to Predict the Interaction Effect of Defaults on the Damage of Composite Pipe. Oriental Journal of Chemistry 37(2), 314–320 (2021)10.13005/ojc/370208 ↗
33. Zhang, Y., et al.: High-Temperature Tensile Failure Mechanism of RTM-Made Composite T-Joints. Defence Technology 49, 371–386 (2025)10.1016/j.dt.2025.02.022 ↗
34. Sapi, Z., Design: Analysis and Testing of Composite T-Joints. PhD Thesis, University of Bath, (2019)