Effects of Z-Pin Areal Density and Layout on Mode I Fracture in Composite Laminates: An FEA-Based Investigation
Source abstract
Abstract
Abstract This study investigates the effect of z-pin through-thickness reinforcement on the Mode I interlaminar fracture toughness of composite laminates. Initially, experimental test data were used to validate multiscale Finite Element Analysis (FEA) models developed to simulate Double Cantilever Beam (DCB) mechanical evaluation of z-pin reinforced composites. The validated models were then employed to explore the enhancement in interlaminar toughness associated with variations in z-pin diameter and areal density. Results indicate that z-pins substantially improve fracture toughness, with smaller diameter z-pins and higher areal densities yielding the greatest enhancements as to be expected. This improvement is attributed to a greater number of active z-pins bridging the crack front and an expanded interfacial surface area. Furthermore, the study finds that the z-pin layout pattern exerts minimal influence on interlaminar performance, with improvements primarily driven by optimizing pin size and density. These findings provide theoretical support for the optimization of z-pinning techniques and their application in advanced composite structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Sun, M., Zhong, X., Zhang, L., Liu, H., Huang, C., Sun, J., Zhao, Y., Bao, J.: Effects of interfacial strength and failure modes on the tension-tension fatigue performance of high-toughness CF/EP composites. Compos. Commun. 102278 (2025)10.1016/j.coco.2025.102278 ↗
2. Mehdipour, H., Camanho, P.P., Belingardi, G.: Elasto-plastic constitutive equations for short fiber reinforced polymers[J]. Compos. Part. B: Eng. 165, 199–214 (2019)10.1016/j.compositesb.2018.11.106 ↗
3. Nur, T.J., Ryan, C.A., Bajwa, D.S., Cairns, D.S., Ridgard, C., Amendola, R.: Characterization of frictional behavior of fiber reinforced composites during forming: a review. Compos. Part A: Appl. Sci. Manufac. 108852 (2025)10.1016/j.compositesa.2025.108852 ↗
4. Kim, J.Y., Hwang, Y.T., Baek, J.H., Song, W.Y., Kim, H.S.: Study on inter-ply friction between woven and unidirectional prepregs and its effect on the composite forming process. Compos. Struct. 267, 113888 (2021)10.1016/j.compstruct.2021.113888 ↗
5. Lozano, G.G., Tiwari, A., Turner, C., Astwood, S.: A review on design for manufacture of variable stiffness composite laminates. Proc. Inst. Mech. Eng B J. Eng. Manufact. 230(6): 981–992 (2016)10.1177/0954405415600012 ↗
6. Shah, S.Z.H., Karuppanan, S., Megat-Yusoff, P.S.M., Sajid, Z.: Impact resistance and damage tolerance of fiber reinforced composites: a review. Compos. Struct. 217, 100–121 (2019)10.1016/j.compstruct.2019.03.021 ↗
7. Giurgiutiu, V.: Structural health monitoring of aerospace composite. Elsevier (2018)
8. Cheng, Z.Q., Tan, W., Xiong, J.J.: Modelling pre-fatigue, low-velocity impact and post-impact fatigue behaviours of composite helicopter tail structures under multipoint coordinated loading spectrum. Thin-Walled Struct. 176, 109349 (2022)10.1016/j.tws.2022.109349 ↗
9. Mendoza, A., Friderikos, O., Trullo, R., Baranger, E.: Design of artificial neural networks for damage Estimation of composite laminates: application to delamination failures in ply drops. Compos. Struct. 304, 116320 (2023)10.1016/j.compstruct.2022.116320 ↗
10. Yun, Z.X., Li, D.H.: Thermo-mechanical fatigue progressive analysis of delamination in composite laminates. Mech. Adv. Mater. Struct. 31(18), 4280–4294 (2024)10.1080/15376494.2023.2193442 ↗
11. Gregory, J.R., Spearing, S.M.: Constituent and composite quasi-static and fatigue fracture experiments. Compos. Part A: Appl. Sci. Manufac. 36(5), 665–674 (2005)10.1016/j.compositesa.2004.07.007 ↗
12. Mouritz, A.P.: Review of applications for advanced three-dimensional fibre textile composites. Compos. Part A: Appl. Sci. Manufac. 30(12), 1445–1461 (1999)10.1016/S1359-835X(99)00034-2 ↗
13. Zhang, S., Xu, Y., Zhang, W.: A novel micromechanical model to study the influence of cure process on the in-plane tensile properties of z-pinned laminates. Compos. Struct. 300, 116156 (2022)10.1016/j.compstruct.2022.116156 ↗
14. Zhang, S., Xu, Y., Zhang, W.: Experimental and numerical study on the influence of cure process on the bridging traction mechanism of z-pins. Int. J. Mech. Sci. 245, 108096 (2023)10.1016/j.ijmecsci.2022.108096 ↗
15. Chen, M., Zhang, B., Allegri, G., Hallett, S.R.: Effects of carbon-fibre Z-pins on the through-thickness tensile strength of curved composite laminates under four-point bending. Compos. Part. B: Eng. 111629 (2024)10.1016/j.compositesb.2024.111629 ↗
16. Isa, M., Feih, S.: Compression fatigue properties of quasi-isotropic z-pinned carbon/epoxy laminate with barely visible impact damage. Compos. Struct. 93, 2222–2230 (2011)10.1016/j.compstruct.2011.03.015 ↗
17. Zhao, G., Li, M., Zhang, Z., Zheng, J., Zhang, Y., Zhao, Y., Hu, Z., Chen, P.: Synergistically improving the edge-on impact damage resistance of composite laminates using multi-scale CNF/Z-pin toughening. Compos. Sci. Technol. 252, 110586 (2024)10.1016/j.compscitech.2024.110586 ↗
18. Park, Y.B., Lee, B.H., Kweon, J.H., Choi, J.H., Choi, I.H.: The strength of composite bonded T-joints transversely reinforced by carbon pins. Compos. Struct. 94(2), 625–634 (2012)10.1016/j.compstruct.2011.08.026 ↗
19. Koh, T.M., Isa, M.D., Feih, S., Mouritz, A.P.: Experimental assessment of the damage tolerance of z-pinned T-stiffened composite panels. Compos. Part. B: Eng. 44(1), 620–627 (2013)10.1016/j.compositesb.2012.02.017 ↗
20. Mouritz, A.P.: Review of z-pinned composite laminates. Compos. - A: Appl. Sci. Manuf. 38(12), 2383–2397 (2007)10.1016/j.compositesa.2007.08.016 ↗
21. Cheng, J., Xu, Y., Zhang, W., Liu, W.: A review on the multi-scale simulation of Z-pinned composite laminates. Compos. Struct. 295, 115834 (2022)10.1016/j.compstruct.2022.115834 ↗
22. Gong, Y., Chen, X., Zou, L., Li, X., Zhao, L., Zhang, J., Hu, N.: Experimental and numerical investigations on the mode I delamination growth behavior of laminated composites with different z-pin fiber reinforcements. Compos. Struct. 287, 115370 (2022)10.1016/j.compstruct.2022.115370 ↗
23. Allegri, G., Yasaee, M., Partridge, I.K., Hallett, S.R.: A novel model of delamination bridging via Z-pins in composite laminates. Int. J. Solids Struct. 51(19–20), 3314–3332 (2014)10.1016/j.ijsolstr.2014.05.017 ↗
24. Mohamed, G., Allegri, G., Yasaee, M., Hallett, S.R.: Cohesive element formulation for z-pin delamination bridging in fibre reinforced laminates. Int. J. Solids Struct. 132, 232–244 (2018)10.1016/j.ijsolstr.2017.05.037 ↗
25. Cox, B.N., Sridhar, N.: A traction law for inclined fiber tows bridging mixed-mode cracks. Mech. Adv. Mater. Struct. 9(4), 299–331 (2002)10.1080/15376490290096973 ↗
26. Grassi, M., Zhang, X.: Finite element analyses of mode I interlaminar delamination in z-fibre reinforced composite laminates. Compos. Sci. Technol. 63(12), 1815–1832 (2003)10.1016/S0266-3538(03)00134-9 ↗
27. Bianchi, F., Zhang, X.: A cohesive zone model for predicting delamination suppression in z-pinned laminates. Compos. Sci. Technol. 71(16), 1898–1907 (2011)10.1016/j.compscitech.2011.09.004 ↗
28. Dantuluri, V., Maiti, S., Geubelle, P.H., Patel, R., Kilic, H.: Cohesive modeling of delamination in z-pin reinforced composite laminates. Compos. Sci. Technol. 67(34), 616–631 (2007)10.1016/j.compscitech.2006.07.024 ↗
29. Finlay, J.G., Waas, A.M., Bartley-Cho, J., Muraliraj, N.: Combined loading of unreinforced and Z-pin reinforced composite Pi joints: an experimental and numerical study. Compos. Part. B: Eng. 287, 111796 (2024)10.1016/j.compositesb.2024.111796 ↗
30. Blacklock, M., Joosten, M., Pingkarawat, K., Mouritz, A.: Prediction of mode I delamination resistance of z-pinned laminates using the embedded finite element technique. Compos. A. 91, 283–291 (2016)10.1016/j.compositesa.2016.10.008 ↗
31. Mouritz, A., Koh, T.: Re-evaluation of mode I bridging traction modelling for z-pinned laminates based on experimental analysis. Compos. Part. B. 56, 797–807 (2014)10.1016/j.compositesb.2013.09.016 ↗
32. Jain, L., Wetherhold, R.: Effect of fiber extensibility on the fracture toughness of short fiber or brittle matrix composites. Appl. Mech 45(8), 377–389 (1992)10.1115/1.3119766 ↗
33. Gray, R.: Analysis of the effect of embedded fibre length on fibre debonding and pull-out from an elastic matrix. J. Mater. Sci. 19, 861–870 (1984)10.1007/BF00540456 ↗
34. Cox, B.: Snubbing effects in the pullout of a fibrous rod from a laminate. Mech. Adv. Mater. Struct. 12(2), 85–98 (2005)10.1080/15376490490493899 ↗
35. Bianchi, F.: Numerical modelling of through-thickness reinforced structural joints. Cranfield University (2012)
36. Dassault, Systèmes: Abaqus Analysis User’s Guide. Dassault Systèmes Simulia Corp, Providence, RI, USA (2014)
37. Wang, C., Duong, C.: Bonded joints and repairs to composite airframe structures. Academic (2016)
38. Dai, S., Yan, W., Liu, H., Mai, Y.: Experimental study on z-pin bridging law by pullout test. Compos. Sci. Technol. 64(1), 2451–2457 (2004)10.1016/j.compscitech.2004.04.005 ↗
39. Zhang, B., Allegri, G., Yasaee, M., Hallett, S.R.: Micro-mechanical finite element analysis of Z-pins under mixed-mode loading[J]. Compos. Part A: Appl. Sci. Manufac. 78, 424–435 (2015)10.1016/j.compositesa.2015.07.006 ↗
40. Cartié, D.: Effect of Z-Fibres TM on the Delamination Behaviour of Carbon Fibre I Epoxy Laminates. Cranfield University, School of Industrial Manufacturing Science, Milton Keynes (2000)
41. ASTM D5528-01: Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fibre Reinforced Polymer Matrix Composites. in: ASTM International Standard, West Conshohocken, PA (2007)
42. International, A.S.T.M.: ASTM D5528-13 - Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composite. ASTM International, Pennsylvania (2022)