Fatigue Hysteresis Behavior of Unidirectional SiC/Si3N4 Composite at Elevated Temperature under Tension-Tension Loading
Source abstract
Abstract
In this paper, the fatigue hysteresis behavior of unidirectional SiC/Si3N4 ceramic-matrix composite at elevated temperature has been investigated. The hysteresis loops models considering interface friction between fibers and the matrix have been developed to establish the relationships between the fatigue hysteresis loops, fatigue hysteresis dissipated energy and the interface frictional coefficient. Using the experimental fatigue hysteresis dissipated energy, the interface frictional coefficient of SiC/Si3N4 composite at 1000 °C were obtained for different cycle numbers and fatigue peak stresses. The effects of fatigue peak stress, test temperature and cycle number on the evolution of fatigue hysteresis dissipated energy and interface frictional coefficient have been analyzed. It was found that the fatigue hysteresis dissipated energy can be used to monitor the interface debonding and damage evolution inside of the composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced Surface Polishing Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos. Sci. Technol. 64, 155–170 (2004). doi: 10.1016/S0266-3538(03)00230-610.1016/S0266-3538(03)00230-6 ↗
2. Lanser, R.L., Ruggles-Wrenn, M.B.: Tension-compression fatigue of a Nextel™ 720/alumina composite at 1200 °C in air and in steam. Appl. Compos. Mater. 23, 707–717 (2016). doi: 10.1007/s10443-016-9481-810.1007/s10443-016-9481-8 ↗
3. Sabelkin, V., Mall, S., Cook, T.S., Fish, J.: Fatigue and creep behavior of a SiC/SiC composite under combustion and laboratory environments. J. Compos. Mater. 50, 2145–2153 (2016). doi: 10.1177/002199831560232310.1177/0021998315602323 ↗
4. Ruggles-Wrenn, M.B., Christensen, D.T., Chamberlain, A.L., Lane, J.E., Cook, T.S.: Effect of frequency and environment on fatigue behavior of a CVI SiC/SiC ceramic matrix composite at 1200 °C. Compos. Sci. Technol. 71, 190–196 (2011). doi: 10.1016/j.compscitech.2010.11.00810.1016/j.compscitech.2010.11.008 ↗
5. Ruggles-Wrenn, M.B., Lanser, R.L.: Tension-compression fatigue of an oxide/oxide ceramic composite at elevated temperature. Mater. Sci. Eng. A. 659, 270–277 (2016). doi: 10.1016/j.msea.2016.02.05710.1016/j.msea.2016.02.057 ↗
6. Ruggles-Wrenn, M.B., Lee, M.D.: Fatigue behavior of an advanced SiC/SiC ceramic composite with a self-healing matrix at 1300 °C in air and in steam. Mater. Sci. Eng. A. 677, 438–445 (2016). doi: 10.1016/j.msea.2016.09.07610.1016/j.msea.2016.09.076 ↗
7. Maillet, E., Godin, N., R’Mili, M., Reynaud, P., Fantozzi, G., Lamon, J.: Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission. Composites Part A. 57, 8–15 (2014). doi: 10.1016/j.compositesa.2013.10.01010.1016/j.compositesa.2013.10.010 ↗
8. Rouby, D., Reynaud, P.: Fatigue behavior related to interface modification during load cycling in ceramic-matrix fiber composites. Comps. Sci. Technol. 48, 109–118 (1993). doi: 10.1016/0266-3538(93)90126-210.1016/0266-3538(93)90126-2 ↗
9. Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta metal. Mater. 43, 859–875 (1995). doi: 10.1016/0956-7151(94)00304-Z10.1016/0956-7151(94)00304-Z ↗
10. Li, L.B., Song, Y.D., Sun, Y.C.: Modeling loading/unloading hysteresis behavior of unidirectional C/SiC ceramic matrix composites. Appl. Compos. Mater. 20, 655–672 (2013). doi: 10.1007/s10443-012-9294-310.1007/s10443-012-9294-3 ↗
11. Li, L.B.: Fatigue hysteresis behavior of unidirectional C/SiC ceramic-matrix composite at room and elevated temperatures. Mater. Sci. Eng. A. 625, 1–18 (2015). doi: 10.1016/j.msea.2014.11.08610.1016/j.msea.2014.11.086 ↗
12. Reynaud, P.: Cyclic fatigue of ceramic-matrix composites at ambient and elevated temperatures. Compos. Sci. Technol. 56, 809–814 (1996). doi: 10.1016/0266-3538(96)00025-510.1016/0266-3538(96)00025-5 ↗
13. Dalmaz, A., Reynaud, P., Rouby, D., Fantozzi, G., Abbe, F.: Mechanical behavior and damage development during cyclic fatigue at high-temperature of a 2.5D carbon/SiC composite. Compos. Sci. Technol. 58, 693–699 (1998). doi: 10.1016/S0266–3538(97)00150-410.1016/S0266–3538(97)00150-4 ↗
14. Fantozzi, G., Reynaud, P.: Mechanical hysteresis in ceramic matrix composites. Mater. Sci. Eng. Part A Struct. 521-522, 18–23 (2009). doi: 10.1016/j.msea.2008.09.12810.1016/j.msea.2008.09.128 ↗
15. Li, L.B., Song, Y.D.: An approach to estimate interface shear stress of ceramic matrix composites from hysteresis loops. Appl. Compos. Mater. 17, 309–328 (2010). doi: 10.1007/s10443-009-9122-610.1007/s10443-009-9122-6 ↗
16. Li, L.B., Song, Y.D., Sun, Y.C.: Estimate interface shear stress of unidirectional C/SiC ceramic matrix composites from hysteresis loops. Appl. Compos. Mater. 20, 693–707 (2013). doi: 10.1007/s10443-012-9297-010.1007/s10443-012-9297-0 ↗
17. Li, L.B.: Assessment of the interfacial properties from fatigue hysteresis loss energy in ceramic-matrix composites with different fiber preforms at room and elevated temperatures. Mater. Sci. Eng. A. 613, 17–36 (2014). doi: 10.1016/j.msea.2014.06.09210.1016/j.msea.2014.06.092 ↗
18. Kotil, T.: Ceramic composites: Experimental and analytical study of SiC/Si3N4 composites. PhD Thesis, Michigan: University of Michigan (1991)