Flow Properties of Tailored Net-Shape Thermoplastic Composite Preforms
Source abstract
Abstract
A novel thermoplastic programmable preforming process, TP-P4, has been used to manufacture preforms for non-isothermal compression molding. Commingled glass and polypropylene yarns are deposited by robot onto a vacuum screen, followed by a heat-setting operation to stabilize the as-placed yarns for subsequent handling. After an optional additional preconsolidation stage, the preforms are molded by preheating and subsequent press forming in a shear edge tool. The in- and out-of-plane flow capabilities of the material were investigated, and compared to those of 40 wt% Glass Mat Thermoplastics (GMTs). Although the TP-P4 material has a fiber fraction of 60 wt%, the material could be processed to fill 77 mm deep ribs with a thickness of 3 mm, indicative of complex part production. The pressure requirements for out-of-plane flow were shown to depend on the fiber length and fiber alignment. Segregation phenomena were found to be less severe with TP-P4 than with GMT material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Jespersen, S.T. Baudry, F. Schmäh, D. Wakeman, M.D. Michaud, V. Blanchard, P. Norris, R. Månson, J.-A.E.: App. Compos. Mat 16(1), 55–71 (2009)10.1007/s10443-008-9078-y ↗
2. Jespersen, S.T., F. Baudry, M.D.Wakeman, V.Michaud, P.Blanchard, R.Norris and J-A.E. Månson Consolidation of net-shape random fiber thermoplastic composite preforms. Polymer Composites (2009). doi: 10.1002/pc.2084410.1002/pc.20844 ↗
3. Corum, J.M. Battiste, R.L. Ruggles, M.B. Ren, W.: Compos. Sci. and Technol. 61(8), 1083–1095 (2001)10.1016/S0266-3538(00)00242-6 ↗
4. Chavka, N.G., J.S.Dahl. Proc. of SAMPE US symp. and exhib. Long Beach, USA. (1999).
5. Wakeman, M.D. Cain, T.A. Rudd, C.D. Brooks, R. Long, A.C.: Compos. Sci. and Technol. 58(12), 1879–1898 (1998)10.1016/S0266-3538(98)00011-6 ↗
6. Wakeman, M.D. Cain, T.A. Rudd, C.D. Brooks, R. Long, A.C.: Compos. Sci. and Tech 59(5), 709–726 (1999)10.1016/S0266-3538(98)00124-9 ↗
7. Wakeman, M.D. Cain, T.A. Rudd, C.D. Brooks, R. Long, A.C.: Compos. Sci. and Tech. 59(8), 1153–1167 (1999)10.1016/S0266-3538(98)00155-9 ↗
8. Wakeman, M.D. Cain, T.A. Rudd, C.D. Brooks, R. Long, A.C.: Compos. Sci. and Tech. 60(10), 1901–1918 (2000)10.1016/S0266-3538(00)00066-X ↗
9. Tornqvist, R. Sunderland, P. Månson, J.A.E.: Compos. Part A 31, 917–927 (2000)10.1016/S1359-835X(00)00048-8 ↗
10. Tornqvist, R. Sunderland, P. Månson, J.A.E.: Polymer compos 21(5), 779–788 (2000)10.1002/pc.10232 ↗
11. Dumont, P. Orgeas, L. Favier, D. Pizette, P. Venet, C.: Compos.: Part A 38, 353–368 (2007)10.1016/j.compositesa.2006.03.010 ↗
12. P. Dumont, L. Orgéas, C. Servais, V. Michaud, D. Favier and J.-A. E. Månson, Proc. of ESAFORM 8, Cluj-Napoca, Romania, 2005
13. Servais, C. Luciani, A. Månson, J.-A.E.: J. Non-Newtonian Fluid Mech. 104, 165–184 (2002)10.1016/S0377-0257(02)00018-6 ↗
14. Servais, C. Michaud, V. Månson, J.-A.E.: Polymer Compos 22, 298–311 (2001)10.1002/pc.10539 ↗
15. Comprehensive composite materials, Pergamon Press, 2000
16. L. Orgéas, P.J.J. Dumont, V. Michaud and D. Favier, Int. J. of Mat. Forming, 2008.
17. Dumont, P. Orgeas, L. Le Corre, S. Favier, D.: Int. J. of Plasticity 19, 625–646 (2003)10.1016/S0749-6419(01)00077-8 ↗
18. Dumont, P. Le Corre, S. Orgéas, L. Favier, D. Gabori, C. Lory, P.: Eur. J. of Comp. Mech. 13, 883–900 (2005)