journal article·2013-12

Processing Optimization of Deformed Plain Woven Thermoplastic Composites

John R. Smith, Uday K. Vaidya

Applied Composite Materials· Volume 20· Issue 6
Publisher page

Abstract

This research addresses the processing optimization of post-manufactured, plain weave architecture composite panels consisted of four glass layers and thermoplastic polyurethane (TPU) when formed with only localized heating. Often times, during the production of deep drawn composite parts, a fabric preform experiences various defects, including non-isothermal heating and thickness variations. Minimizing these defects is of utmost importance for mass produceability in a practical manufacturing process. The broad objective of this research was to implement a design of experiments approach to minimize through-thickness composite panel variation during manufacturing by varying the heating time, the temperature of heated components and the clamping pressure. It was concluded that the heated tooling with least area contact was most influential, followed by the length of heating time and the amount of clamping pressure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Long, A.C.: Design and manufacture of textile composites. Woodhead Publishing Limited. 1–462 (2005)10.1533/9781845690823 ↗
2. Bhattacharyya, D.: Composite sheet forming. Elsevier Science. 1, 1–549 (1997)
3. Wang, J.: Predictive modeling and experimental measurements of composite forming behavior. The University of Nottingham. 1–244 (2008). http://etheses.nottingham.ac.uk/602/
4. Labeas, G.N., Watiti, V.B., Katsiropoulos, C.V.: Thermomechanical simulation of infrared heating diaphragm forming process for thermoplastic parts. Thermoplast. Compos. Mater. 21, 353–370 (2008)10.1177/0892705708089480 ↗
5. Hou, M.: Stamp forming of fabric-reinforced thermoplastic composites. Polym. Compos. 17, 596–603 (1996)10.1002/pc.10649 ↗
6. Lim, T.-C., Ramakrishna, S.: Modelling of composite sheet forming: a review. Compos. A: Appl. Sci. Manuf. 33, 515–537 (2002). doi: 10.1016/S1359-835X(01)00138-510.1016/S1359-835X(01)00138-5 ↗
7. Krebs, J., Friedrich, K., Bhattacharyya, D.: A direct comparison of matched-die versus diaphragm forming. Compos. A: Appl. Sci. Manuf. 29A, 183–188 (1998)10.1016/S1359-835X(97)82706-6 ↗
8. Nowacki, J., Fujiwara, J., Mitschang, P., Neitzel, M.: Deep drawing of fabric reinforcement thermoplastics: maximum drawing depth and mechanism of wrinkle formation. Polym. Polym. Compos. 6, 215–222 (1998)
9. Vanclooster, K., Lomov, S.V., Verpoest, I.: Investigation of interplay shear in composite forming. Int. J. Mater. Form. 1, 957–960 (2008). doi: 10.1007/s12289-008-0
10. Vanclooster, K., Goidsenhoven, S., Lomov, S.V., Verpoest, I.: Optimizing the deepdrawing of multilayered woven fabric composites. Int. J. Mater. Form. 2, 153–156 (2009). doi: 10.1007/s12289-009-0522-910.1007/s12289-009-0522-9 ↗
11. Stanley, W.F., Mallon, P.J.: Intraply shear characterisation of a fibre reinforced thermoplastic composite. Compos. A: Appl. Sci. Manuf. 37, 939–948 (2006). doi: 10.1016/j.compositesa.2005.03.01710.1016/j.compositesa.2005.03.017 ↗
12. Smith, J.R., Uday, K., Vaidya, J.K.J.: Analytical modeling of deformed plain woven thermoplastic composites. Int. J. Mater. Form. doi: 10.1007/s12289-013-1133-z10.1007/s12289-013-1133-z ↗
13. Hwang, S.-F., Hwang, K.-J.: Stamp forming of locally heated thermoplastic composites. Compos. A: Appl. Sci. Manuf. 33, 669–676 (2002). doi: 10.1016/S1359-835X(02)00004-010.1016/S1359-835X(02)00004-0 ↗
14. Campbell, D.T., Cramer, D.R.: Hybrid thermoplastic composite ballistic helmet fabrication study. Society for the Advancement of Material and Process Engineering. (2008). http://www.fiberforge.com/documents/Hybrid-Thermoplastic-Composite-Ballistic-Helmet-Fabrication-Study.pdf
15. Cunningham, J.E., Monaghan, P.F., Brogan, M.T.: Predictions of the temperature profile within composite sheets during pre-heating. Compos. A: Appl. Sci. Manuf. 29, 51–61 (1998)10.1016/S1359-835X(97)00031-6 ↗
16. Jeff, C.F., Wu, M.H.: Experiments: planning, analysis, and parameter design optimization, 1st edn. Wiley, John & Sons. 1–630 (2000)
17. Sall, J.: JMP 7.0.1 [Computer Software]. SAS Inst Inc. (2007). http://www.jmp.com/software/pro/
18. Jacques Goupy, L.C.: Introduction to design of experiments: with JMP examples, 3rd edn. SAS Press. 1–472 (2007)