Relationship Between Hysteresis Dissipated Energy and Temperature Rising in Fiber-Reinforced Ceramic-Matrix Composites Under Cyclic Loading
Source abstract
Abstract
In this paper, the relationship between hysteresis dissipated energy and temperature rising of the external surface in fiber-reinforced ceramic-matrix composites (CMCs) during the application of cyclic loading has been analyzed. The temperature rise, which is caused by frictional slip of fibers within the composite, is related to the hysteresis dissipated energy. Based on the fatigue hysteresis theories considering fibers failure, the hysteresis dissipated energy and a hysteresis dissipated energy-based damage parameter changing with the increase of cycle number have been investigated. The relationship between the hysteresis dissipated energy, a hysteresis dissipated energy-based damage parameter and a temperature rise-based damage parameter have been established. The experimental temperature rise-based damage parameter of unidirectional, cross-ply and 2D woven CMCs corresponding to different fatigue peak stresses and cycle numbers have been predicted. It was found that the temperature rise-based parameter can be used to monitor the fatigue damage evolution and predict the fatigue life of fiber-reinforced CMCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Mechanical Behavior of Composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos. Sci. Technol. 64, 155–170 (2004). doi: 10.1016/S0266-3538(03)00230-610.1016/S0266-3538(03)00230-6 ↗
2. Schmidt, S., Beyer, S., Knabe, H., Immich, H., Meistring, R., Gessler, A.: Advanced ceramic matrix composite materials for current and future propulsion system applications. Acta Astronaut. 55, 409–420 (2004). doi: 10.1016/j.actaastro.2004.05.05210.1016/j.actaastro.2004.05.052 ↗
3. DiCarlo, J.A., van Roode, M.: Ceramic composite development for gas turbine hot section components. Proc. ASME Turbo Expo. Power Land Sea Air. 2, 221–231 (2006)
4. Stephen, T.: General Electric primes CMC for turbine blades. Flight International. http://www.flightglobal.com/news/articles/general-electric-primes-cmc-for-turbine-blades-349834/ (2010)
5. Mall, S., Engesser, J.M.: Effects of frequency on fatigue behavior of CVI C/SiC at elevated temperature. Compos. Sci. Technol. 66, 863–874 (2006). doi: 10.1016/j.compscitech.2005.06.02010.1016/j.compscitech.2005.06.020 ↗
6. Holmes, J.W., Shuler, S.F.: Temperature rise during fatigue of fiber-reinforced ceramics. J. Mater. Sci. Lett. 9, 1290 (1990). doi: 10.1007/BF0072652210.1007/BF00726522 ↗
7. Cho, C.D., Holmes, J.W., Barber, J.R.: Estimation of interfacial shear in ceramic composites from frictional heating measurements. J. Am. Ceram. Soc. 74, 2802–2808 (1991). doi: 10.1111/j.1151-2916.1991.tb06846.x10.1111/j.1151-2916.1991.tb06846.x ↗
8. Kim, J., Liaw, P.K.: Characterization of fatigue damage modes in nicalon/calcium aluminosilicate composites. J. Eng. Mater. Technol. 127, 8–15 (2005). doi: 10.1115/1.183676610.1115/1.1836766 ↗
9. Liu, C.D., Cheng, L.F., Luan, X.G., Lin, B., Zhou, J.: Damage evolution and real-time non-destructive evaluation of 2D carbon-fiber/SiC-matrix composites under fatigue loading. Mater. Lett. 62, 3922–924 (2008). doi: 10.1016/j.matlet.2008.04.06310.1016/j.matlet.2008.04.063 ↗
10. Daniel, I.M., Lee, J.W.: The behavior of ceramic matrix fiber composites under longitudinal loading. Compos. Sci. Technol. 46, 105–113 (1993). doi: 10.1016/0266-3538(93)90166-E10.1016/0266-3538(93)90166-E ↗
11. Aveston, J., Cooper, G.A., Kelly, A.: Single and multiple fracture. Properties of fiber composites. In: Conference on proceedings, National Physical Laboratory, pp. 15–26. IPC, UK (1971)
12. Zok, F.W., Spearing, S.M.: Matrix crack spacing in brittle matrix composites. Acta Metall. Mater. 40, 2033–2043 (1992). doi: 10.1016/0956-7151(92)90189-L10.1016/0956-7151(92)90189-L ↗
13. Zhu, H., Weitsman, Y.: The progression of failure mechanisms in unidirectional reinforced ceramic composites. J. Mech. Phys. Solids. 42, 1601–1632 (1994). doi: 10.1016/0022-5096(94)90089-210.1016/0022-5096(94)90089-2 ↗
14. Solti, J.P., Mall, S., Robertson, D.D.: Modeling damage in unidirectional ceramic-matrix composites. Compos. Sci. Technol. 54, 55–66 (1995). doi: 10.1016/0266-3538(95)00041-010.1016/0266-3538(95)00041-0 ↗
15. Curtin, W.A.: Multiple matrix cracking in brittle matrix composites. Acta Metall. Mater. 41, 1369–1377 (1993). doi: 10.1016/0956-7151(93)90246-O10.1016/0956-7151(93)90246-O ↗
16. Hsueh, C.H.: Crack-wake interface debonding criterion for fiber-reinforced ceramic composites. Acta Mater. 44, 2211–2216 (1996). doi: 10.1016/1359-6454(95)00369-X10.1016/1359-6454(95)00369-X ↗
17. Gao, Y., Mai, Y., Cotterell, B.: Fracture of fiber-reinforced materials. J. Appl. Math. Phys. 39, 550–572 (1988). doi: 10.1007/BF0094896210.1007/BF00948962 ↗
18. Sun, Y.J., Singh, R.N.: The generation of multiple matrix cracking and fiber-matrix interfacial debonding in a glass composite. Acta Mater. 46, 1657–1667 (1998). doi: 10.1016/S1359-6454(97)00347-910.1016/S1359-6454(97)00347-9 ↗
19. Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta Metall. Mater. 43, 859–875 (1995). doi: 10.1016/0956-7151(94)00304-Z10.1016/0956-7151(94)00304-Z ↗
20. Rouby, D., Reynaud, P.: Fatigue behavior related to interface modification during load cycling in ceramic-matrix fiber composites. Compos. Sci. Technol. 48, 109–118 (1993). doi: 10.1016/0266-3538(93)90126-210.1016/0266-3538(93)90126-2 ↗
21. Fantozzi, G., Reynaud, P., Rouby, D.: Thermomechanical behavior of long fibers ceramc-ceramic composites. Silic. Ind. 66, 109–119 (2001)
22. Li, L.B.: Micromechanical modeling of fatigue hysteresis behavior in carbon fiber-reinforced ceramic-matrix composites. Part I: theoretical analysis. Compos. Part B Eng. (2014). doi: 10.1016/j.compositesb.2014.09.03610.1016/j.compositesb.2014.09.036 ↗
23. Solti, J.P., Mall, S., Robertson, D.D.: Modeling of fatigue in cross-ply ceramic matrix composites. J. Compos. Mater. 31, 1921–1943 (1997). doi: 10.1177/00219983970310190310.1177/002199839703101903 ↗
24. Li, L.B.: Fatigue hysteresis behavior of cross-ply C/SiC ceramic matrix composites at room and elevated temperatures. Mater. Sci. Eng. A 586, 160–170 (2013). doi: 10.1016/j.msea.2013.08.01710.1016/j.msea.2013.08.017 ↗
25. Curtin, W.A.: Theory of mechanical properties of ceramic-matrix composites. J. Am. Ceram. Soc. 74, 2837–2845 (1991). doi: 10.1111/j.1151-2916.1991.tb06852.x10.1111/j.1151-2916.1991.tb06852.x ↗
26. Lee, S.S., Stinchcomb, W.W.: Damage mechanisms of cross-ply nicalon/CAS-II laminate under cyclic tension. Ceram. Eng. Sci. Proc. 15, 40–48 (1994). doi: 10.1002/9780470314500.ch510.1002/9780470314500.ch5 ↗
27. Holmes, J.W., Wu, X., Sorensen, B.F.: Frequency dependence of fatigue life and internal heating of a fiber-reinforced/ceramic-matrix composite. J. Am. Ceram. Soc. 77, 3284–86 (1994). doi: 10.1111/j.1151-2916.1994.tb04587.x10.1111/j.1151-2916.1994.tb04587.x ↗
28. Shuler, S.F., Holmes, J.W., Wu, X.: Influence of loading frequency on the room-temperature fatigue of a carbon-fiber/sic-matrix composite. J. Am. Ceram. Soc. 76, 2327–36 (1993). doi: 10.1111/j.1151-2916.1993.tb07772.x10.1111/j.1151-2916.1993.tb07772.x ↗