Analysis of the Forming of Interlock Textile Composites Using a Hypoelastic Approach
Source abstract
Abstract
Numerical simulation of the textile composites forming plays an important role in improving the manufacturing quality, reducing the manufacturing cycle, and manufacturing cost. The focus is on the shaping of one or several layers of G1151 interlock reinforcement. Based on the continuous approach at the macroscale, an approach using a hypoelastic behavior is proposed considering the specific interlock textile material behavior. The stress accumulation is carried out in frames defined by the direction of the warp and weft yarns. The approach is implemented in the commercial software Abaqus. By adding inter-layer contact properties, this approach can realize the simulation of multi-layers textile composites with different yarn orientation configurations. Experimental analyses have shown that this approach can correctly trace the specific behavior of interlock textile composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Chen, X., Lo, W.-Y., Tayyar, A.E., Day, R.J.: Mouldability of Angle-Interlock Woven Fabrics for Technical Applications. Text. Res. J. 72, 195–200 (2002). https://doi.org/10.1177/00405175020720030210.1177/004051750207200302 ↗
2. Boussu, F.: The use of warp interlock fabric inside textile composite protection against ballistic impact. Text. Res. J. 81, 344–354 (2010). https://doi.org/10.1177/004051751038517010.1177/0040517510385170 ↗
3. Karaduman, NS.: Textile Reinforced Structural Composites for Advanced Applications. In: Karaduman Y, editor., Rijeka: IntechOpen; 2017, p. Ch. 4. https://doi.org/10.5772/intechopen.6824510.5772/intechopen.68245 ↗
4. Boisse, P.: Finite element analysis of composite forming. Compos. Form. Technol. A Vol. Woodhead Publ. Ser. Text., Elsevier Ltd; 2007, p. 46–79. https://doi.org/10.1533/9781845692537.4610.1533/9781845692537.46 ↗
5. Gereke, T., Döbrich, O., Hübner, M., Cherif, C.: Experimental and computational composite textile reinforcement forming: A review. Compos. Part A Appl. Sci. Manuf. 46, 1–10 (2013). https://doi.org/10.1016/j.compositesa.2012.10.00410.1016/j.compositesa.2012.10.004 ↗
6. Bussetta, P., Correia, N.: Numerical forming of continuous fibre reinforced composite material: A review. Compos. Part A Appl. Sci. Manuf. 113, 12–31 (2018). https://doi.org/10.1016/j.compositesa.2018.07.01010.1016/j.compositesa.2018.07.010 ↗
7. Boisse, P., Hamila, N., Madeo, A.: The difficulties in modeling the mechanical behavior of textile composite reinforcements with standard continuum mechanics of Cauchy. Some possible remedies. Int. J. Solids Struct. 154, 55–65 (2018). https://doi.org/10.1016/j.ijsolstr.2016.12.01910.1016/j.ijsolstr.2016.12.019 ↗
8. Skordos, A.A., Monroy Aceves, C., Sutcliffe, M.P.F.: A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites. Compos. Part A Appl. Sci. Manuf. 38, 1318–1330 (2007). https://doi.org/10.1016/j.compositesa.2006.11.00510.1016/j.compositesa.2006.11.005 ↗
9. Potter, K., Khan, B., Wisnom, M., Bell, T., Stevens, J.: Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures. Compos. Part A Appl. Sci. Manuf. 39, 1343–1354 (2008). https://doi.org/10.1016/j.compositesa.2008.04.01610.1016/j.compositesa.2008.04.016 ↗
10. Boisse, P., Hamila, N., Vidal-Sallé, E., Dumont, F.: Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses. Compos. Sci. Technol. 71, 683–692 (2011). https://doi.org/10.1016/j.compscitech.2011.01.01110.1016/j.compscitech.2011.01.011 ↗
11. Soulat, D., Cheruet, A., Boisse, P.: Simulation of continuous fibre reinforced thermoplastic forming using a shell finite element with transverse stress. Comput. Struct. 84, 888–903 (2006). https://doi.org/10.1016/j.compstruc.2006.02.01110.1016/j.compstruc.2006.02.011 ↗
12. Liang, B., Colmars, J., Boisse, P.: A shell formulation for fibrous reinforcement forming simulations. Compos. Part A Appl. Sci. Manuf. 100, 81–96 (2017). https://doi.org/10.1016/j.compositesa.2017.04.02410.1016/j.compositesa.2017.04.024 ↗
13. Bai, R., Colmars, J., Naouar, N., Boisse, P.: A specific 3D shell approach for textile composite reinforcements under large deformation. Compos. Part A Appl. Sci. Manuf. 139, 106135 (2020). https://doi.org/10.1016/j.compositesa.2020.10613510.1016/j.compositesa.2020.106135 ↗
14. Badel, P., Vidal-Sallé, E., Maire, E., Boisse, P.: Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale. Compos. Sci. Technol. 68, 2433–2440 (2008). https://doi.org/10.1016/j.compscitech.2008.04.03810.1016/j.compscitech.2008.04.038 ↗
15. Khan, M.A., Mabrouki, T., Vidal-Sallé, E., Boisse, P.: Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behavior. Application to the double dome benchmark. J. Mater. Process. Technol. 210, 378–388 (2010). https://doi.org/10.1016/j.jmatprotec.2009.09.02710.1016/j.jmatprotec.2009.09.027 ↗
16. Thompson, A.J., Belnoue, J.P.H., Hallett, S.R.: Modelling defect formation in textiles during the double diaphragm forming process. Compos. Part B Eng. 202, 108357 (2020). https://doi.org/10.1016/j.compositesb.2020.10835710.1016/j.compositesb.2020.108357 ↗
17. Hughes, T.J.R., Winget, J.: Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis. Int. J. Numer. Methods Eng. 15, 1862–1867 (1980). https://doi.org/10.1002/nme.162015121010.1002/nme.1620151210 ↗
18. Xiao, H., Bruhns, O.T., Meyers, A.: Hypo-Elasticity Model Based upon the Logarithmic Stress Rate. J. Elast. 47, 51–68 (1997). https://doi.org/10.1023/A:100735692591210.1023/A:1007356925912 ↗
19. Belytschko, T., Liu, WK., Moran, B.: Nonlinear Finite Elements for Continua and Structures 2000
20. Boisse, P., Aimène, Y., Dogui, A., Dridi, S., Gatouillat, S., Hamila, N., et al.: Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming. Int. J. Mater. Form. 3, 1229–1240 (2010). https://doi.org/10.1007/s12289-009-0664-910.1007/s12289-009-0664-9 ↗
21. Dafalias, Y.F.: Corotational Rates for Kinematic Hardening at Large Plastic Deformations. J. Appl. Mech. 50, 561–565 (1983). https://doi.org/10.1115/1.316709110.1115/1.3167091 ↗
22. Dienes, J.K.: On the analysis of rotation and stress rate in deforming bodies. Acta. Mech. 32, 217–232 (1979). https://doi.org/10.1007/BF0137900810.1007/BF01379008 ↗
23. Peng, X.Q., Cao, J.: A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics. Compos. Part A Appl. Sci. Manuf. 36, 859–874 (2005). https://doi.org/10.1016/j.compositesa.2004.08.00810.1016/j.compositesa.2004.08.008 ↗
24. Pierce, R.S., Falzon, B.G., Thompson, M.C.: A multi-physics process model for simulating the manufacture of resin-infused composite aerostructures. Compos. Sci. Technol. 149, 269–279 (2017). https://doi.org/10.1016/j.compscitech.2017.07.00310.1016/j.compscitech.2017.07.003 ↗
25. Boisse, P., Cherouat, A., Gelin, J.C., Sabhi, H.: Experimental study and finite element simulation of a glass fiber fabric shaping process. Polym. Compos. 16, 83–95 (1995). https://doi.org/10.1002/pc.75016011110.1002/pc.750160111 ↗
26. Yu, W.R., Zampaloni, M., Pourboghrat, F., Chung, K., Kang, T.J.: Analysis of flexible bending behavior of woven preform using non-orthogonal constitutive equation. Compos. Part A Appl. Sci. Manuf. 36, 839–850 (2005). https://doi.org/10.1016/j.compositesa.2004.10.02610.1016/j.compositesa.2004.10.026 ↗
27. ten Thije, R.H.W., Akkerman, R., Huétink, J.: Large deformation simulation of anisotropic material using an updated Lagrangian finite element method. Comput. Methods Appl. Mech. Eng. 196, 3141–3150 (2007). https://doi.org/10.1016/j.cma.2007.02.01010.1016/j.cma.2007.02.010 ↗
28. Lin, H., Wang, J., Long, A.C., Clifford, M.J., Harrison, P.: Predictive modelling for optimization of textile composite forming. Compos. Sci. Technol. 67, 3242–3252 (2007). https://doi.org/10.1016/j.compscitech.2007.03.04010.1016/j.compscitech.2007.03.040 ↗
29. Chen, S., Harper, L.T., Endruweit, A., Warrior, N.A.: Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints. Compos. Part A Appl. Sci. Manuf. 76, 10–19 (2015). https://doi.org/10.1016/j.compositesa.2015.05.00610.1016/j.compositesa.2015.05.006 ↗
30. Liang, B., Hamila, N., Peillon, M., Boisse, P.: Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations. Compos. Part A Appl. Sci. Manuf. 67, 111–122 (2014). https://doi.org/10.1016/j.compositesa.2014.08.02010.1016/j.compositesa.2014.08.020 ↗
31. Dangora, L.M., Mitchell, C.J., Sherwood, J.A.: Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture. Compos. Part A Appl. Sci. Manuf. 78, 102–112 (2015). https://doi.org/10.1016/j.compositesa.2015.07.01110.1016/j.compositesa.2015.07.011 ↗
32. Döbrich, O., Gereke, T., Diestel, O., Krzywinski, S., Cherif, C.: Decoupling the bending behavior and the membrane properties of finite shell elements for a correct description of the mechanical behavior of textiles with a laminate formulation. J. Ind. Text. 44, 70–84 (2013). https://doi.org/10.1177/152808371347744210.1177/1528083713477442 ↗
33. Haanappel, S.P., Ten Thije, R.H.W., Sachs, U., Rietman, B., Akkerman, R.: Formability analyses of uni-directional and textile reinforced thermoplastics. Compos. Part A Appl. Sci. Manuf. 56, 80–92 (2014). https://doi.org/10.1016/j.compositesa.2013.09.00910.1016/j.compositesa.2013.09.009 ↗
34. Dörr, D., Henning, F., Kärger, L.: Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics. Compos. Part A Appl. Sci. Manuf. 109, 585–596 (2018). https://doi.org/10.1016/j.compositesa.2018.03.03710.1016/j.compositesa.2018.03.037 ↗
35. Launay, J., Hivet, G., Duong, A.V., Boisse, P.: Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements. Compos. Sci. Technol. 68, 506–515 (2008). https://doi.org/10.1016/j.compscitech.2007.06.02110.1016/j.compscitech.2007.06.021 ↗
36. Cao, J., Akkerman, R., Boisse, P., Chen, J., Cheng, H.S., de Graaf, E.F., et al.: Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results. Compos. Part A Appl. Sci. Manuf. 39, 1037–1053 (2008). https://doi.org/10.1016/j.compositesa.2008.02.01610.1016/j.compositesa.2008.02.016 ↗
37. de Bilbao, E., Soulat, D., Hivet, G., Gasser, A.: Experimental Study of Bending Behaviour of Reinforcements. Exp. Mech. 50, 333–351 (2010). https://doi.org/10.1007/s11340-009-9234-910.1007/s11340-009-9234-9 ↗
38. Alshahrani, H., Hojjati, M.: A new test method for the characterization of the bending behavior of textile prepregs. Compos. Part A Appl. Sci. Manuf. 97, 128–140 (2017). https://doi.org/10.1016/j.compositesa.2017.02.02710.1016/j.compositesa.2017.02.027 ↗