Effect of Moisture and Temperature on the Compressive Failure of CCF300/QY8911 Unidirectional Laminates
Source abstract
Abstract
CCF300/BMI composites are relevant materials for supersonic aircraft due to their high specific properties. However in aeronautical applications, the composites are exposed to severe environmental conditions, and it is known that hot and humid environments can degrade some aspects of the material performance especially the compressive strength. In this paper, the effect of moisture and temperature on the compressive failure of unidirectional CCF300 carbon fiber reinforced bismaleimide(BMI) matrix composites were studied. Also scanning electron microscope (SEM) was employed for fractographic investigations. It is observed that the plastic deformations at the fiber/matrix and interlaminar interface as well as residual stresses lower the compressive strength of the material. The failure of specimens tested in hot and wet conditions always occurs as a result of out-of-plane microbuckling that is attributed to the reduction of matrix strength. In addition, the fiber microbuckling model, fiber kinking model and combined model were employed for the compressive strength prediction of the UD CCF300/QY8911 composites subjected to different environment conditions. The comparison was done between these models. Results show that the combined model is more suitable for the compressive strength prediction of CCF300/QY8911 composite systems when suffering severe environment conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Belan, F., Bellenger, V., Mortaigne, B.: Hydrolytic stability of unsaturated polyester network with controlled chain ends [J]. Polym. Degrad. Stab. 56, 93–102 (1997)10.1016/S0141-3910(96)00185-1 ↗
2. Ishida, H., Koening, J.L.: A fourier transform infrared spectroscopy study of the hydrolytic stability of silane coupling agents on E-glass fibers [J]. J. Polym. Sci. Polym. Phys. Ed. 18, 1931–1943 (1980)10.1002/pol.1980.180180906 ↗
3. Sonawala, S.P., Spontak, R.J.: Degradation kinetics of glass reinforced polyesters in chemical environments [J]. J. Mater. Sci. 31, 4745–4756 (1996)10.1007/BF00355857 ↗
4. Jacquemet, R., Lagrange, A.: Vieillissement de stratifies polyester/verre E et evolution de leurs caracteristiques mecaniques enmilieu marin [J]. Composites (Paris) 4, 39–46 (1988)
5. Schutte, C.L.: Environmental durability of glass-fiber composites [J]. Mater. Sci. Eng. R 13, 265–323 (1994)10.1016/0927-796X(94)90002-7 ↗
6. Jedidi, J., Jacquemin, F., Vautrin, A.: Design of accelerated hygrothermal cycles on polymer matrix composites in the case of a supersonic aircraft [J]. Compos. Stucture 68, 429–437 (2005)10.1016/j.compstruct.2004.04.009 ↗
7. Akay, M., Spratt, G.R.: Evaluation of thermal ageing of a carbon fiber reinforced bismalemide [J]. Copos. Sci. Technol. 68, 3081–3086 (2008)10.1016/j.compscitech.2008.07.002 ↗
8. Lowea, A., Fox, B., Otieno-Alego, V.: Interfacial ageing of high temperature carbon/bismaleimide composites[J]. Composites A 33, 1289–1292 (2002)10.1016/S1359-835X(02)00163-X ↗
9. Sereir, Z., Adda bedia, E., Tounsi, A.: Effect of temperature on the hygrothermal behavior of unidirectional laminated plates with asymmetrical environmental conditions [J]. Int. J. Compos. Struct. 72, 383–392 (2006)10.1016/j.compstruct.2005.01.008 ↗
10. Sereir, Z., Adda vedia, E., Tounsi, A.: Effect of the accelerated moisture diffusivity on the hygrothermal behaviour of laminated plate with symmetrical environmental conditions [J]. J. Thermal. Stresses 28(9), 889–910 (2005)10.1080/01495730590964891 ↗
11. Tounsi, A., Amara, K.H., Adda-Bedia, E.: Analysis of transverse cracking and stiffness loss in cross-ply laminates with hygrothermal conditions [J]. Int. J. Comput. Mater. Sci. 32, 167–174 (2005)10.1016/j.commatsci.2004.06.005 ↗
12. Tounsi, A., Amara, K.H., Megueni, A., Benzair, A.: On the transverse cracking and stiffness degradation of aged angle-ply laminates [J]. Mater. Lett. 60, 2561–2564 (2006)10.1016/j.matlet.2006.01.037 ↗
13. Apicella, A., Tessieri, R., Cataldis, C.D.: Sorption modes of water in glassy epoxies. J. Membr. Sci. 18, 211–225 (1984)10.1016/S0376-7388(00)85035-8 ↗
14. Pritchard, G., Speake, S.D.: The use of water absorption kinetic data to predict laminate property changes [J]. Composites 18, 227–232 (1987)10.1016/0010-4361(87)90412-5 ↗
15. Gaurier, L., Mortaigne, B., Bellenger, V.: Interface damage study of hydrothermally aged glass-fibre-reinforced polyester composites [J]. Compos. Sci. Tech. 59, 2329–2337 (1999)10.1016/S0266-3538(99)00085-8 ↗
16. Benkhedda, A., Tounsi, A., Adda bedia, E.A.: Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite plates [J]. Compos. Struct. 82, 629–635 (2008)10.1016/j.compstruct.2007.04.013 ↗
17. Kim, H.J., Seo, D.W.: Effect of water absorption fatigue on mechanical properties of sisal textile-reinforced composites [J]. Int. J. Fatigue 28, 1307–1314 (2006)10.1016/j.ijfatigue.2006.02.018 ↗
18. Newman, R.H.: Auto-accelerative water damage in an epoxy composite reinforced with plain-weave flax fabric [J]. Coposites A 40, 1651–20 (2009)
19. Tsenoglou, C.J., Pavlidou, S., Papaspyrides, C.D.: Evaluation of interfacial relaxation due to water absorption in fiber-polymer composites [J]. Compos. Sci. Technol. 66, 2855–2864 (2006)10.1016/j.compscitech.2006.02.022 ↗
20. Sinmazcelik, T., Armagan Arici, A.: Thermal cycles effects on interlaminar shear strength (ILSS) and impact behaviour of carbon/PEI composites [J]. J. Mater. Sci. 41, 1233–1241 (2006)10.1007/s10853-005-3661-5 ↗
21. Sereir, Z., Tounsi, A., Adda-Bedia, E.A.: Effect of the cyclic environmental conditions on the hygrothermal behavior of the symmetric hybrid composites [J]. Mech. Adv. Mater. Struct. 13(3), 237–248 (2006)10.1080/15376490600582735 ↗
22. Lv, X., Wang, R., Liu, W., Jiang, L.: Suiface and interface properties of carbon fiber composites under cyclical aging [J]. Appl. Surf. Sci. 257, 10459–10464 (2011)10.1016/j.apsusc.2011.06.147 ↗
23. Pavlidou, S., Papaspyrides, C.D.: The effect of hygrothermal history on water sorption and interlaminar shear strength of glass/polyester composites with different interfacial strength [J]. Compos. A 34, 1117–1124 (2003)10.1016/S1359-835X(03)00214-8 ↗
24. Boualem, N., Sereir, Z.: Accelerated aging of unidirectional hybrid composites under the long-term elevated temperature and moisture concentration [J]. Theor. Appl. Fract. Mech. 55, 68–75 (2011)10.1016/j.tafmec.2011.01.007 ↗
25. Yurgartis, S.W.: Measurement of small angle fiber misalignments in continuous fiber composites. Compos. Sci. Technol. 30, 279–293 (1987)10.1016/0266-3538(87)90016-9 ↗
26. Jumahat, A., Soutis, C., Jones, F.R., Hodzic, A.: Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading. Compos. Struct. 92(2), 295–305 (2010)10.1016/j.compstruct.2009.08.010 ↗
27. Kumosa, L., Benedikt, B., Armentrout, D., Kumosa, M.: Moisture absorption properties of unidirectional glass/polymer composites used in composite (non-ceramic) insulators. Compos. A 35, 1049–1063 (2004)10.1016/j.compositesa.2004.03.008 ↗
28. Berbinau, P., Soutis, C., Guz, I.A.: Compressive failure of 0° unidirectional CFRP laminates by fibre microbuckling. Compos. Sci. Technol. 59(9), 1451–1455 (1999)10.1016/S0266-3538(98)00181-X ↗
29. Soutis, C., Turkmen, D.: Influence of shear properties and fibre imperfections on the compressive behaviour of GFRP laminates. Appl. Comp. Mater. 6(2), 327–342 (1995)
30. Jumahat, A., Soutis, C., Jones, F.R., Hodzic, A.: Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading. Compos. Struct. 92(2), 295–305 (2010)10.1016/j.compstruct.2009.08.010 ↗
31. Budiansky, B.: Micromechanics [J]. Comput. Struct. 16, 3–12 (1983)10.1016/0045-7949(83)90141-4 ↗
32. Yongbo, Z., Huimin, F.: On the longitudinal compressive strength prediction of unidirectional laminated composites based on an improved model [J]. Polym. Compos. 32, 1817–1826 (2011)10.1002/pc.21214 ↗
33. Xu, Y.L., Reifsnider, K.L.: Micromechanical modeling of composite compressive strength [J]. J. Compos. Mater. 27, 572–588 (1993)10.1177/002199839302700602 ↗
34. Argon, A.S.: Fracture of composite in treatise on materials science and technology [M]. New York: Academic Press 1, 79–114 (1972)