Rubber Impact on 3D Textile Composites
Source abstract
Abstract
A low velocity impact study of aircraft tire rubber on 3D textile-reinforced composite plates was performed experimentally and numerically. In contrast to regular unidirectional composite laminates, no delaminations occur in such a 3D textile composite. Yarn decohesions, matrix cracks and yarn ruptures have been identified as the major damage mechanisms under impact load. An increase in the number of 3D warp yarns is proposed to improve the impact damage resistance. The characteristic of a rubber impact is the high amount of elastic energy stored in the impactor during impact, which was more than 90% of the initial kinetic energy. This large geometrical deformation of the rubber during impact leads to a less localised loading of the target structure and poses great challenges for the numerical modelling. A hyperelastic Mooney-Rivlin constitutive law was used in Abaqus/Explicit based on a step-by-step validation with static rubber compression tests and low velocity impact tests on aluminium plates. Simulation models of the textile weave were developed on the meso- and macro-scale. The final correlation between impact simulation results on 3D textile-reinforced composite plates and impact test data was promising, highlighting the potential of such numerical simulation tools.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Mouritz, A.P., Bannister, M.K., Falzon, P.J., Leong, K.H.: Review of applications for advanced three-dimensional fibre textile composites. Compos. A 30(12), 1445–1461 (1999)10.1016/S1359-835X(99)00034-2 ↗
2. Byun, J.H., Um, M.K., Hwang, B.S., Song, S.W.: Impact performance of 3D interlock textile composites. In: Composites Technologies for 2020, Ye, L., Mai, Y.W., Su, Z. (eds.) Proceedings of 4th Asian-Australasian Conference on Composite Materials (ACCM-4), Sydney, Australia, July 6–7, 2004
3. Lv, L., Sun, B., Qiu, Y., Gu, B., Gu, B.: Energy absorptions and failure modes of 3D orthogonal hybrid woven composite struck by flat-ended rod. Polymer. Compos. 27(4), 410–416 (2006)10.1002/pc.20208 ↗
4. Hu, H., Sun, B., Sun, H., Gu, B.: A comparative study of the impact response of 3D textile composites and aluminium plates. J. Compos. Mater. 44(5), 593–619 (2010)10.1177/0021998309347577 ↗
5. Byers, A.: The Crash of the Concorde. The Rosen Publishing Group, Inc., New York (2003)
6. Mines, R.A.W., McKnown, S., Birch, R.S.: Impact of aircraft rubber tyre fragments on aluminium alloy plates: I—Experimental. Int. J. Impact Eng. 34(4), 627–646 (2007)10.1016/j.ijimpeng.2006.02.005 ↗
7. Karagiozova, D., Mines, R.A.W.: Impact of aircraft rubber tyre fragments on aluminium alloy plates: II—Numerical simulation using LS-DYNA. Int. J. Impact Eng. 34(4), 647–667 (2007)10.1016/j.ijimpeng.2006.02.004 ↗
8. Birch, R.S., Bergler, C., Kracht, M., Karagozova, D., Mines, R.A.W.: Post-test simulation of airliner wing access panel subject to tyre debris impact. 5th European LS-DYNA Users Conference, Birmingham, UK, May 25–26, 2005
9. Hörmann, M.: FE-application in aircraft structure analysis. 10th International LS-DYNA Users Conference, Dearborn, MI, June 8–10, 2008
10. Toso-Pentecote, N., Johnson, A.F., Chabrier, G.: Modelling and simulation of tyre impacts on stiffened composite panels. Composites 2009, 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London, April 1–3, 2009
11. Toso-Pentecote, N., Schwinn, D., Johnson, A.F.: Modelling and simulation of tyre impacts on stiffened composite panels. SAMPE Europe International Conference, Paris, April 12–14, 2010
12. Dau, F., Duplessis Kergomard, Y.: Study on interlock 3X damage mechanisms under impact loading using a deformable impactor. 14th International Conference on Experimental Mechanics (ICEM 14), Poitiers, France, July 4–9, 201010.1051/epjconf/20100620012 ↗
13. Duplessis Kergomard, Y., Dau, F., Heimbs, S., Besnard, G., Hild, F.: Study on interlock 3X damage mechanisms under impact loading using a deformable impactor. 17èmes Journées Nationales sur les Composites (JNC 17), Poitiers, France, June 15–17, 2011
14. Mooney, M.: A theory of large elastic deformation. J. Appl. Phys. 11(9), 582–592 (1940)10.1063/1.1712836 ↗
15. Rivlin, R.S.: Large elastic deformations of isotropic materials. I. Fundamental concepts. Phil. Trans. Roy. Soc. Lond. A240, 459–490 (1948)10.1098/rsta.1948.0002 ↗
16. Johnson, A.F., Kempe, G., Simon, J.: Design of composite wing access cover under impact loads. Appl. Compos. Mater. 7(4), 219–229 (2000)10.1023/A:1008956614293 ↗
17. Neves, R.R.V., Micheli, G.B., Alves, M.: An experimental and numerical investigation on tyre impact. Int. J. Impact Eng. 37(6), 685–693 (2010)10.1016/j.ijimpeng.2009.10.001 ↗
18. Bolarinwa, E.O., Olatunbosun, O.A.: On rubber material properties for FE tyre model. Proceedings of the Ninth Annual Postgraduate Research Symposium, pp. 21–25. University of Birmingham, UK (2003)
19. Bolarinwa, E.O., Olatunbosun, O.A.: Finite element simulation of the tyre burst test. Proc. Inst. Mech. Eng. 218, Part D, 1251–1258 (2004)10.1243/0954407042580075 ↗
20. Reid, J.D., Boesch, D.A., Bielenberg, R.W.: Detailed tire modeling for crash applications. Int. J. Crashworthiness 12(5), 521–529 (2007)10.1080/13588260701483813 ↗
21. Helnwein, P., Liu, C.H., Meschkie, G., Mang, H.A.: A new 3-D finite element model for cord-reinforced rubber composites—application to analysis of automobile tires. Finite Elem. Anal. Des. 14(1), 1–16 (1993)10.1016/0168-874X(93)90075-2 ↗
22. Nguyen, S.N., Greenhalgh, E.S., Olsson, R., Iannucci, L., Curtis, P.T.: Modeling the lofting of runway debris by aircraft tires. J. Aircraft 45(5), 1701–1714 (2008)10.2514/1.35564 ↗
23. Nguyen, S.N., Greenhalgh, E.S., Iannucci, L., Olsson, R., Curtis, P.T.: Improved models for runway debris lofting simulations. Aeronaut. J. 113(1148), 669–681 (2009)10.1017/S000192400000333X ↗
24. Nguyen, S.N., Greenhalgh, E.S., Olsson, R., Iannucci, L., Curtis, P.T.: Parametric analysis of runway stone lofting mechanisms. Int. J. Impact Eng. 37(5), 502–514 (2010)10.1016/j.ijimpeng.2009.11.006 ↗
25. Song, B., Chen, W.: One-dimensional dynamic compressive behaviour of EPDM rubber. J. Eng. Mater. Tech. 125(3), 294–301 (2003)10.1115/1.1584492 ↗
26. Yang, L.M., Shim, V.P.W., Lim, C.T.: A visco-hyperelastic approach to modeling the constitutive behaviour of rubber. Int. J. Impact Eng. 24(6–7), 545–560 (2000)10.1016/S0734-743X(99)00044-5 ↗
27. Hoo Fatt, M.S., Ouyang, X.: Three-dimensional constitutive equations for styrene butadiene rubber at high strain rates. Mech. Mater. 40(1–2), 1–16 (2008)10.1016/j.mechmat.2007.06.002 ↗
28. Shim, V.P.W., Yang, L.M., Lim, C.T., Law, P.M.: A visco-hyperelastic constitutive model to characterize both tensile and compressive behaviour of rubber. J. Appl. Polymer Sci. 92(1), 523–531 (2004)10.1002/app.20029 ↗
29. Li, Z., Sun, B., Gu, B.: FEM simulation of 3D angle-interlock woven composite under ballistic impact from unit cell approach. Comput. Mater. Sci. 49(1), 171–183 (2010)10.1016/j.commatsci.2010.04.043 ↗
30. Naik, N.K., Azad, S.N.M., Durga Prasad, P., Thuruthimattam, B.J.: Stress and failure analysis of 3D orthogonal interlock woven composites. J. Reinforc. Plast. Compos. 20(17), 1485–1523 (2001)10.1177/073168401772679110 ↗
31. Nauman, S., Boussu, F., Legrand, X., Koncar, V.: Geometrical modelling of 3D interlock fabric. 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, June 2–5, 2008
32. Schneider, J., Marcin, L., Aboura, Z., Marshal, D.: Experimental investigation and behaviour modeling of a 3D interlock woven fabric composite: part 1. In: Recent Advances in Textile Composites, Advani, S.G. (ed.) Proc. 9th International Conference on Textile Composites, Newark, DE, Oct. 13–15, 2008
33. Marcin, L., Schneider, J., Kaminski, M., Maire, J.F., Marsal, D.: Experimental investigation and behaviour modeling of a 3D interlock woven fabric composite: part 2. In: Recent Advances in Textile Composites, Advani, S.G. (ed.) Proc. 9th International Conference on Textile Composites, Newark, DE, Oct. 13–15, 2008
34. DeLuycker, E., Morestin, F., Boisse, P., Marsal, D.: Simulation of 3D interlock composite preforming. Compos. Struct. 88(4), 615–623 (2009)10.1016/j.compstruct.2008.06.005 ↗
35. Bogdanovich, A.E.: Progressive failure modeling and strength predictions of 3-D woven composites. In: Recent Advances in Textile Composites, Advani, S.G. (ed.) Proc. 9th International Conference on Textile Composites, Newark, DE, Oct. 13–15, 2008
36. Van Den Broucke, B., Colin de Verdiere, M., Hartung, D., Middendorf, P., Pickett, A., Ranz Angulo, D., Schouten, M., Tessmer, J.: Failure and impact modelling of textile composites: ITOOL project. SAMPE Europe 28th International Conference, Paris, April 2–4, 2007
37. Van Den Broucke, B., Middendorf, P., Lomov, S.V., Verpoest, I.: Modelling of damage in textile reinforced composites: micro-meso approach. Proceedings of Symposium on Finite Element Modeling of Textiles and Textile Composites, St. Petersburg, Russia, September 26–28, 2007
38. Van Den Broucke, B., Hamila, N., Middendorf, P., Lomov, S.V., Boisse, P., Verpoest, I.: Determination of the mechanical properties of textile-reinforced composites taking into account textile forming parameters. Int. J. Mater. Form. 3(2), 1351–1361 (2010)10.1007/s12289-009-0680-9 ↗
39. Linde, P., Middendorf, P., Van Den Broucke, B., De Boer, H.: Numerical simulation of damage behaviour of textile reinforced composites in aircraft structures. 27th Congress of the International Council of the Aeronautical Sciences (ICAS 2010), Nice, France, September 19–24, 2010
40. Chamis, C.: Mechanics of composite materials: past, present and future. J. Compos. Tech. Res. 11(1), 3–14 (1989)10.1520/CTR10143J ↗
41. Schürmann, H.: Konstruieren mit Faser-Kunststoff-Verbunden. Springer, Berlin (2007)10.1007/978-3-540-72190-1 ↗
42. Dumont, J.P., Ladeveze, P., Poss, M., Remond, Y.: Damage mechanics for 3-D composites. Compos. Struct. 8(2), 119–141 (1987)10.1016/0263-8223(87)90008-0 ↗
43. Ladeveze, P., Le Dantec, E.: Damage modelling of the elementary ply for laminated composites. Compos. Sci. Tech. 43(3), 257–267 (1992)10.1016/0266-3538(92)90097-M ↗
44. Ladeveze, P.: A damage mesomodel of laminate composites. In: Lemaitre, J. (ed.) Handbook of Materials Behaviour Models, Section 10.6, vol. 3, pp. 1004–1014. Publisher Academic Press (2001)10.1016/B978-012443341-0/50102-2 ↗
45. Lubineau, G., Ladeveze, P.: Construction of a micromechanics-based intralaminar mesomodel, and illustrations in ABAQUS/Standard. Comput. Mater. Sci. 43(1), 137–145 (2008)10.1016/j.commatsci.2007.07.050 ↗
46. Johnson, A.F., Simon, J.: Modelling fabric reinforced composites under impact loads. In: Euromech 400: Impact and Damage Tolerance of Composite Materials and Structures. London, September 27–29, 1999