Application of Ultrasonic Technique for Cure Monitoring of Epoxy/Graphene Oxide–Carbon Nanotubes Composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Epoxy Resin Curing Processes · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Papageorgiou, D.G., Kinloch, I.A., Young, R.J.: Mechanical properties of graphene and graphene-based nanocomposites. Prog. Mater Sci. 90, 75–127 (2017). https://doi.org/10.1016/j.pmatsci.2017.07.00410.1016/j.pmatsci.2017.07.004 ↗
2. Ogbonna, V.E., Popoola, P.I., Popoola, O.M., Adeosun, S.O.: A review on recent advances on improving polyimide matrix nanocomposites for mechanical, thermal, and tribological applications: Challenges and recommendations for future improvement. J. Thermoplast. Compos. Mater. 36(2), 836–865 (2023). https://doi.org/10.1177/0892705721100790410.1177/08927057211007904 ↗
3. Demircan, G., Kisa, M., Ozen, M., Aktas, B.: Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical properties. Iran. Polym. J. 29(3), 253–264 (2020). https://doi.org/10.1007/s13726-020-00790-z10.1007/s13726-020-00790-z ↗
4. Ozen, M., Demircan, G., Kisa, M., Acikgoz, A., Ceyhan, G., Işıker, Y.: Thermal properties of surface-modified nano-Al2O3/Kevlar fiber/epoxy composites. Mater. Chem. Phys. 278, 125689 (2022). https://doi.org/10.1016/j.matchemphys.2021.12568910.1016/j.matchemphys.2021.125689 ↗
5. Liu, J., Li, Y., Yin, B., Li, S., Chen, P.: Preparation and characterization of novel nano-Al2O3/SiO2-based composites for energy-saving. Int. J. Appl. Ceram. Technol. 20(1), 371–379 (2023). https://doi.org/10.1111/ijac.1422210.1111/ijac.14222 ↗
6. Demircan, G., Ozen, M., Kisa, M., Acikgoz, A., Işıker, Y.: The effect of nano-gelcoat on freeze-thaw resistance of glass fiber-reinforced polymer composite for marine applications. Ocean Eng. 269, 113589 (2023). https://doi.org/10.1016/j.oceaneng.2022.113589.10.1016/j.oceaneng.2022.113589 ↗
7. Demircan, G., Kisa, M., Ozen, M., Acikgoz, A.: Quasi-Static Penetration Behavior of Glass-Fiber-Reinforced Epoxy Nanocomposites. Mech. Compos. Mater. 57(4), 503–516 (2021). https://doi.org/10.1007/s11029-021-09973-y10.1007/s11029-021-09973-y ↗
8. Killedar, L.S., Vernekar, P.R., Shanbhag, M.M., Shetti, N.P., Malladi, R.S., Veerapur, R.S., Reddy, K.R.: Fabrication of nanoclay-modified electrodes and their use as an effective electrochemical sensor for biomedical applications. J. Mol. Liq. 351, 118583 (2022). https://doi.org/10.1016/j.molliq.2022.11858310.1016/j.molliq.2022.118583 ↗
9. Pełech, I., Pełech, R., Narkiewicz, U., Kaczmarek, A., Guskos, N., Żołnierkiewicz, G., Typek, J., Berczyński P.: Magnetic and electrical properties of carbon nanotube/epoxy composites. Mater. Sci. Eng. B 254, 114507 (2020). https://doi.org/10.1016/j.mseb.2020.11450710.1016/j.mseb.2020.114507 ↗
10. Spitalsky, Z., Tasis, D., Papagelis, K., Galiotis, C.: Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties. Prog. Polym. Sci. 35(3), 357–401 (2010). https://doi.org/10.1016/j.progpolymsci.2009.09.00310.1016/j.progpolymsci.2009.09.003 ↗
11. Zhou, B., Luo, W., Yang, J., Duan, X., Wen, Y., Zhou, H., Chen, R., Shan, B.: Thermal conductivity of aligned CNT/polymer composites using mesoscopic simulation. Compos. A Appl. Sci. Manuf. 90, 410–416 (2016). https://doi.org/10.1016/j.compositesa.2016.07.02310.1016/j.compositesa.2016.07.023 ↗
12. Dong, M., Zhang, H., Tzounis, L., Santagiuliana, G., Bilotti, E., Papageorgiou, D.G.: Multifunctional epoxy nanocomposites reinforced by two-dimensional materials: A review. Carbon 185, 57–81 (2021). https://doi.org/10.1016/j.carbon.2021.09.00910.1016/j.carbon.2021.09.009 ↗
13. Tezel, G.B., Sarmah, A., Desai, S., Vashisth, A., Green, M.J.: Kinetics of carbon nanotube-loaded epoxy curing: Rheometry, differential scanning calorimetry, and radio frequency heating. Carbon 175, 1–10 (2021). https://doi.org/10.1016/j.carbon.2020.12.09010.1016/j.carbon.2020.12.090 ↗
14. Abdalla, M., Dean, D., Robinson, P., Nyairo, E.: Cure behavior of epoxy/MWCNT nanocomposites: The effect of nanotube surface modification. Polymer 49(15), 3310–3317 (2008). https://doi.org/10.1016/j.polymer.2008.05.01610.1016/j.polymer.2008.05.016 ↗
15. Puglia, D., Valentini, L., Armentano, I., Kenny, J.M.: Effects of single-walled carbon nanotube incorporation on the cure reaction of epoxy resin and its detection by Raman spectroscopy. Diam. Relat. Mater. 12(3–7), 827–832 (2003). https://doi.org/10.1016/s0925-9635(02)00358-810.1016/s0925-9635(02)00358-8 ↗
16. Tao, K., Yang, S., Grunlan, J.C., Kim, Y.-S., Dang, B., Deng, Y., Thomas, R.L., Wilson, B.L., Wei, X.: Effects of carbon nanotube fillers on the curing processes of epoxy resin-based composites. J. Appl. Polym. Sci. 102(6), 5248–5254 (2006). https://doi.org/10.1002/app.2477310.1002/app.24773 ↗
17. Li, Q., Zhang, S., Ye, J., Liu, X.: Multiple catalytic polymerization of phthalonitrile resin bearing benzoxazine moiety: Greatly reduced curing temperature. Eur. Polym. J. 180, 111472 (2022). https://doi.org/10.1016/j.eurpolymj.2022.11147210.1016/j.eurpolymj.2022.111472 ↗
18. Chen, K., Campbell, J.A., Lewis, D.A.: Influence of postprinting conditions on morphologies in a three-dimensional printable dual-cure interpenetrating dimethacrylate/epoxy polymer network. ACS Applied Polymer Materials 4(12), 9076–9084 (2022). https://doi.org/10.1021/acsapm.2c0143510.1021/acsapm.2c01435 ↗
19. Gao, Z., You, Y., Chen, Q., North, M., Xie, H.: Vanillin-derived α, ω-diene monomer for thermosets preparation via thiol–ene click polymerization. Green Chem. 25(1), 172–182 (2023). https://doi.org/10.1039/D2GC02901D10.1039/D2GC02901D ↗
20. Wu, J., Liao, H., Ma, Z., Song, H., Cheng, F.: Effect of different initial CaO/SiO2 molar ratios and curing times on the preparation and formation mechanism of calcium silicate hydrate. Materials (Basel, Switzerland) 16(2), 717–734 (2023). https://doi.org/10.3390/ma1602071710.3390/ma16020717 ↗
21. Rau, D.A., Reynolds, J.P., Bryant, J.S., Bortner, M.J., Williams, C.B.: A rheological approach for measuring cure depth of filled and unfilled photopolymers at additive manufacturing relevant length scales. Addit. Manuf. 60, 103207 (2022). https://doi.org/10.1016/j.addma.2022.10320710.1016/j.addma.2022.103207 ↗
22. Kim, D., Centea, T., Nutt, S.R.: In-situ cure monitoring of an out-of-autoclave prepreg: Effects of out-time on viscosity, gelation and vitrification. Compos. Sci. Technol. 102, 132–138 (2014). https://doi.org/10.1016/j.compscitech.2014.07.02710.1016/j.compscitech.2014.07.027 ↗
23. Mulle, M., Collombet, F., Olivier, P., Grunevald, Y.H.: Assessment of cure residual strains through the thickness of carbon–epoxy laminates using FBGs. Part I: Elementary specimen, Composites Part A: Applied Science and Manufacturing 40(1), 94–104 (2009). https://doi.org/10.1016/j.compositesa.2008.10.00810.1016/j.compositesa.2008.10.008 ↗
24. Mulle, M., Collombet, F., Olivier, P., Zitoune, R., Huchette, C., Laurin, F., Grunevald, Y.H.: Assessment of cure-residual strains through the thickness of carbon–epoxy laminates using FBGs Part II: Technological specimen. Compos. A Appl. Sci. Manuf. 40(10), 1534–1544 (2009). https://doi.org/10.1016/j.compositesa.2009.06.01310.1016/j.compositesa.2009.06.013 ↗
25. Hirota, I., Takeda, S.-I., Ogasawara, T.: Evaluation of thermosetting resin curing using a tilted fiber Bragg grating. Compos. A: Appl. Sci. Manuf. 158, 106956 (2022). https://doi.org/10.1016/j.compositesa.2022.10695610.1016/j.compositesa.2022.106956 ↗
26. Mizukami, K., Ikeda, T., Ogi, K.: Measurement of velocity and attenuation of ultrasonic guided wave for real-time estimation of cure-dependent anisotropic viscoelastic properties of carbon fiber-reinforced plastics. Ultrasonics 99, 105952 (2019). https://doi.org/10.1016/j.ultras.2019.10595210.1016/j.ultras.2019.105952 ↗
27. Liu, X., Li, J., Zhu, J., Wang, Y., Qing, X.: Cure monitoring and damage identification of CFRP using embedded piezoelectric sensors network. Ultrasonics 115, 106470 (2021). https://doi.org/10.1016/j.ultras.2021.10647010.1016/j.ultras.2021.106470 ↗
28. Hall, M., Zeng, X., Shelley, T., Schubel, P.: In situ thermoset cure sensing: A review of correlation methods. Polymers 14(15), 2978 (2022). https://doi.org/10.3390/polym1415297810.3390/polym14152978 ↗
29. He, Y., Li, Y., Li, N., Hao, X.: Online monitoring method of degree of cure during non-isothermal microwave curing process. Mater. Res. Exp. 5(2), 025306 (2018). https://doi.org/10.1088/2053-1591/aaad3310.1088/2053-1591/aaad33 ↗
30. Challis, R.E., Blarel, F., Unwin, M.E., Kalashnikov, A.N.: Models of Ultrasonic Bulk Wave Propagation in Thermosets with Spatially Varying Viscoelastic Properties. AIP Conf. Proc. 760(1), 1258–1265 (2005). https://doi.org/10.1063/1.191681610.1063/1.1916816 ↗
31. Greeney, N.S., Strovink, K.M., Scales, A.M., Jessop, J.A., Bolton, J.S., Watson, C.C., Adams, D.E.: Non-contacting transfer of elastic energy into explosive simulants for dynamic property estimation. J. Appl. Phys. 115(19), 193514 (2014). https://doi.org/10.1063/1.487673910.1063/1.4876739 ↗
32. Yang, Z., Tian, Y., Li, W., Zhou, H., Zhang, W., Li, J.: Experimental investigation of the acoustic nonlinear behavior in granular polymer bonded explosives with progressive fatigue damage. Materials 10(6), 660 (2017). https://doi.org/10.3390/ma1006066010.3390/ma10060660 ↗
33. Luo, Z., Zhu, H., Zhao, J.: In Situ Monitoring of Epoxy Resin Curing Process Using Ultrasonic Technique. Exp. Tech. 36(2), 6–11 (2012). https://doi.org/10.1111/j.1747-1567.2011.00741.x10.1111/j.1747-1567.2011.00741.x ↗
34. Sofer, G.A., Hauser, E.A.: A new tool for determination of the stage of polymerization of thermosetting polymers. J. Polym. Sci. 8(6), 611–620 (1952). https://doi.org/10.1002/pol.1952.12008060610.1002/pol.1952.120080606 ↗
35. Lionetto, F., Tarzia, A., Coluccia, M., Maffezzoli, A.: Air-coupled ultrasonic cure monitoring of unsaturated polyester resins. Macromol. Symp. 247(1), 50–58 (2007). https://doi.org/10.1002/masy.20075010710.1002/masy.200750107 ↗
36. Jaunich, M., Stark, W.: Monitoring the vulcanization of rubber with ultrasound: Influence of material thickness and temperature. Polym. Testing 28(8), 901–906 (2009). https://doi.org/10.1016/j.polymertesting.2009.08.00610.1016/j.polymertesting.2009.08.006 ↗
37. Lionetto, F., Rizzo, R., Luprano, V.A.M., Maffezzoli, A.: Phase transformations during the cure of unsaturated polyester resins. Mater. Sci. Eng., A 370(1–2), 284–287 (2004). https://doi.org/10.1016/j.msea.2003.07.02510.1016/j.msea.2003.07.025 ↗
38. Ghodhbani, N., Maréchal, P., Duflo, H.: Ultrasound monitoring of the cure kinetics of an epoxy resin: Identification, frequency and temperature dependence. Polym. Testing 56, 156–166 (2016). https://doi.org/10.1016/j.polymertesting.2016.10.00910.1016/j.polymertesting.2016.10.009 ↗
39. Lange, J., Altmann, N., Kelly, C.T., Halley, P.J.: Understanding vitrification during cure of epoxy resins using dynamic scanning calorimetry and rheological techniques. Polymer 41(15), 5949–5955 (2000). https://doi.org/10.1016/S0032-3861(99)00758-210.1016/S0032-3861(99)00758-2 ↗
40. White, S.R., Mather, P.T., Smith, M.J.: Characterization of the cure-state of DGEBA-DDS epoxy using ultrasonic, dynamic mechanical, and thermal probes. Polym. Eng. Sci. 42(1), 51–67 (2002). https://doi.org/10.1002/pen.1092710.1002/pen.10927 ↗
41. McHugh, J.: Ultrasound technique for the dynamic mechanical analysis (DMA) of polymers, BAM Dissertation Series (2008). https://doi.org/10.14279/depositonce-170610.14279/depositonce-1706 ↗
42. Alig, I., Nancke, K., Johari, G.P.: Relaxations in thermosets. XXVI. Ultrasonic studies of the temperature dependence of curing kinetics of diglycidyl ether of bisphenol-A with catalyst. J. Polym. Sci. B: Polym. Phys. 32(8), 1465–1474 (1994). https://doi.org/10.1002/polb.1994.09032081810.1002/polb.1994.090320818 ↗
43. Challis, R., Unwin, M., Chadwick, D., Freemantle, R., Partridge, I., Dare, D., Karkanas, P.: Following network formation in an epoxy/amine system by ultrasound, dielectric, and nuclear magnetic resonance measurements: a comparative study. J. Appl. Polym. Sci. 88(7), 1665–1675 (2003). https://doi.org/10.1002/app.1182210.1002/app.11822 ↗
44. Alig, I., Lellinger, D., Agarwal, S., Oehler, H.: Monitoring of photopolymerization kinetics and network formation by combined real-time near-infrared spectroscopy and ultrasonic reflectometry. React. Funct. Polym. 73(2), 316–322 (2013). https://doi.org/10.1016/j.reactfunctpolym.2012.08.00610.1016/j.reactfunctpolym.2012.08.006 ↗
45. Afromowitz, M.A., Lam, K.-Y.: The optical properties of curing epoxies and applications to the fiber-optic epoxy cure sensor. Sens. Actuators, A 23(1), 1107–1110 (1990). https://doi.org/10.1016/0924-4247(90)87097-310.1016/0924-4247(90)87097-3 ↗
46. Giordano, M., Nicolais, L., Calabrò, A.M., Cantoni, S., Cusano, A., Breglio, G., Cutolo, A.: A fiber optic thermoset cure monitoring sensor. Polym. Compos. 21(4), 523–530 (2000). https://doi.org/10.1002/pc.1020710.1002/pc.10207 ↗
47. Pavlopoulou, S., Soutis, C., Staszewski, W.J.: Cure monitoring through time–frequency analysis of guided ultrasonic waves. Plast., Rubber Compos. 41(4–5), 180–186 (2012). https://doi.org/10.1179/1743289811Y.000000005210.1179/1743289811Y.0000000052 ↗
48. Su, Y., Xu, L., Zhou, P., Yang, J., Wang, K., Zhou, L.-M., Su, Z.: In situ cure monitoring and In-service impact localization of FRPs using Pre-implanted nanocomposite sensors. Compos. A: Appl. Sci. Manuf. 154, 106799 (2022). https://doi.org/10.1016/j.compositesa.2021.10679910.1016/j.compositesa.2021.106799 ↗
49. Bowler, A.L., Pound, M.P., Watson, N.J.: A review of ultrasonic sensing and machine learning methods to monitor industrial processes. Ultrasonics 124, 106776 (2022). https://doi.org/10.1016/j.ultras.2022.10677610.1016/j.ultras.2022.106776 ↗
50. Schmachtenberg, E., Schulte zur Heide, J., Töpker, J.: Application of ultrasonics for the process control of Resin Transfer Moulding (RTM). Polym. Test. 24(3), 330–338 (2005). https://doi.org/10.1016/j.polymertesting.2004.11.00210.1016/j.polymertesting.2004.11.002 ↗
51. Hudson, T.B., Yuan, F.-G.: Automated in-process cure monitoring of composite laminates using a guided wave-based system with high-temperature piezoelectric transducers. J. Nondestruct. Eval., Diagn. Progn. Eng. Syst. 1(2), 021008–021008–8 (2018). https://doi.org/10.1115/1.403923010.1115/1.4039230 ↗
52. Parthun, M.G., Johari, G.P.: Dynamics of a molecule’s growth: Ultrasonic relaxation studies. J. Chem. Phys. 102(15), 6301–6307 (1995). https://doi.org/10.1063/1.46907610.1063/1.469076 ↗
53. Hsich, H.S.-Y.: Kinetic model of cure reaction and filler effect. J. Appl. Polym. Sci. 27(9), 3265–3277 (1982). https://doi.org/10.1002/app.1982.07027090710.1002/app.1982.070270907 ↗
54. Zhang, J., Ye, R., Zou, J., Tang, J., Wang, H.: A study of isothermal curing of PMI Using DMA. Adv. Mater. Sci. Eng. 2015, 695286 (2015). https://doi.org/10.1155/2015/69528610.1155/2015/695286 ↗
55. Zhang, J., Wu, Y.-M., Ma, X., Huang, B.-Y., Lv, S., Jiang, J.-X., Tang, J.-J.: Isothermal curing kinetics of polymethacrylimide/nano-SiO2 composites based on a dynamic thermomechanical analysis. Mater. Tehnol. 55(2), 293–304 (2021). https://doi.org/10.17222/mit.2020.19110.17222/mit.2020.191 ↗
56. Kalaee, M.R., Famili, M.H.N., Mahdavi, H.: Cure kinetic of poly (alkyltetrasulfide) using a rheological method. Polym.-Plast. Technol. Eng. 48(6), 627–632 (2009). https://doi.org/10.1080/0360255090282447310.1080/03602550902824473 ↗
57. Qi, Z., Tan, Y., Zhang, Z., Gao, L., Zhang, C., Tian, J.: Synergistic effect of functionalized graphene oxide and carbon nanotube hybrids on mechanical properties of epoxy composites. RSC Adv. 8(67), 38689–38700 (2018). https://doi.org/10.1039/C8RA08312F10.1039/C8RA08312F ↗
58. Kong, H.X.: Hybrids of carbon nanotubes and graphene/graphene oxide. Curr. Opin. Solid State Mater. Sci. 17(1), 31–37 (2013). https://doi.org/10.1016/j.cossms.2012.12.00210.1016/j.cossms.2012.12.002 ↗
59. Francesca Lionetto, A.M.: Relaxations during the postcure of unsaturated polyester networks by ultrasonic wave propagation, dynamic mechanical analysis, and dielectric analysis. J. Polym. Sci. B: Polym. Phys. 43(5), 596–602 (2005). https://doi.org/10.1002/polb.2035910.1002/polb.20359 ↗
60. Lionetto, F., Maffezzoli, A.: Monitoring the cure state of thermosetting resins by ultrasound. Materials (Basel, Switzerland) 6(9), 3783–3804 (2013). https://doi.org/10.3390/ma609378310.3390/ma6093783 ↗
61. Aggelis, D.G., Paipetis, A.S.: Monitoring of resin curing and hardening by ultrasound. Constr. Build. Mater. 26(1), 755–760 (2012). https://doi.org/10.1016/j.conbuildmat.2011.06.08410.1016/j.conbuildmat.2011.06.084 ↗
62. Martínez-Miranda, M.R., García-Martínez, V., Gude, M.R.: Gel point determination of a thermoset prepreg by means of rheology. Polym. Test. 78, 105950 (2019). https://doi.org/10.1016/j.polymertesting.2019.10595010.1016/j.polymertesting.2019.105950 ↗
63. Iijima, S.: Helical microtubules of graphitic carbon. Nature 354(6348), 56–58 (1991). https://doi.org/10.1038/354056a010.1038/354056a0 ↗
64. Rana, S., Alagirusamy, R., Joshi, M.: A review on carbon epoxy nanocomposites. J. Reinf. Plast. Compos. 28(4), 461–487 (2009). https://doi.org/10.1177/073168440708541710.1177/0731684407085417 ↗
65. Cao, K., Feng, S., Han, Y., Gao, L., Hue Ly, T., Xu, Z., Lu, Y.: Elastic straining of free-standing monolayer graphene. Nat. Commun. 11(1), 284 (2020). https://doi.org/10.1038/s41467-019-14130-010.1038/s41467-019-14130-0 ↗
66. Yen, M.-Y., Hsiao, M.-C., Liao, S.-H., Liu, P.-I., Tsai, H.-M., Ma, C.-C.M., Pu, N.-W., Ger, M.-D.: Preparation of graphene/multi-walled carbon nanotube hybrid and its use as photoanodes of dye-sensitized solar cells. Carbon 49(11), 3597–3606 (2011). https://doi.org/10.1016/j.carbon.2011.04.06210.1016/j.carbon.2011.04.062 ↗
67. Li, L., Liao, X., Sheng, X., Liu, P., Hao, Z., He, L., Qin, G.: Influence of surface modified graphene oxide on the mechanical performance and curing kinetics of epoxy resin. Polym. Adv. Technol. 31(8), 1865–1874 (2020). https://doi.org/10.1002/pat.491310.1002/pat.4913 ↗
68. Bommegowda, K.B., Renukappa, N.M., Rajan, J.S.: Effect of micro- and nanofiller hybrids on the dynamic mechanical properties of glass reinforced epoxy composites. Polym. Compos. 42(5), 2252–2267 (2021). https://doi.org/10.1002/pc.2597410.1002/pc.25974 ↗
69. Ibarra, L., Paños, D.: Dynamic properties of thermoplastic butadiene–styrene (SBS) and oxidized short carbon fiber composite materials. J. Appl. Polym. Sci. 67(10), 1819–1826 (1998). https://doi.org/10.1002/(SICI)1097-4628(19980307)67:10%3c1819::AID-APP15%3e3.0.CO;2-R10.1002/(SICI)1097-4628(19980307)67:10<1819::AID-APP15>3.0.CO;2-R ↗
70. Ashida, M., Noguchi, T., Mashimo, S.: Effect of matrix’s type on the dynamic properties for short fiber-elastomer composite. J. Appl. Polym. Sci. 30(3), 1011–1021 (1985). https://doi.org/10.1002/app.1985.07030031110.1002/app.1985.070300311 ↗
71. Yink, L., Zhou, Z., Luo Z., Zhong, J., Li, P., Yang, B., Yang, L.: Reinforcing effect of aramid fibers on fatigue behavior of SBR/aramid fiber composites, Polymer Testing 80 (2019) 106092. https://doi.org/10.1016/j.polymertesting.2019.10609210.1016/j.polymertesting.2019.106092 ↗
72. Ucpinar, B., Aytac, A.: Influence of different surface-coated carbon fibers on the properties of the poly(phenylene sulfide) composites. J. Compos. Mater. 53(8), 1123–1132 (2018). https://doi.org/10.1177/002199831879615910.1177/0021998318796159 ↗
73. Raghvan, S., Singhal, P., Rattan, S., Tyagi A.K.: Durable PP/EPDM/GF/SiO(2) nanocomposites with improved strength and toughness for orthotic applications. J. Mech. Behav. Biomed. Mater. 138, 105582 (2023). https://doi.org/10.1016/j.jmbbm.2022.10558210.1016/j.jmbbm.2022.105582 ↗