journal article·2022-02

Meso-scale Numerical Modeling of Uni-directional Composite Panel Under Ballistic Impact

Yanfei Yang, Tianpeng Ling, Sainan Xue, Yanchen Liu, Jinli Zhou

Applied Composite Materials· Volume 29· Issue 1
Publisher page

Abstract

Numerical modeling of uni-directional panels of ultra-high-molecular weight polyethylene (UHMWPE) has been a difficult challenge due to multi-scale nature of materials and intimate structure of the composite panel. In order to capture detailed ballistic responses of fibers and matrix in hard panel, a simplified Finite Element (FE) model of UHMWPE fiber-reinforced composite panel under impact has been developed in this study. To simulate the structure of laminates and reduce calculation cost, a panel model was represented by six plies oriented in the direction of 0°/90°with fiber bundles embedded in the matrix. Fiber bundles and matrix were both assumed as three-dimension solid continuum bodies. In this way, different ballistic responses of fibers and matrix at varied regions in the panel can be identified, such as failure appearance, stress and strain distributions on fiber bundles and matrix and so on. These findings are helpful for structure optimizing of UHMWPE hard panel to achieve improvement of ballistic performance and lightweight.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Bajaj, Sriram, P.: Ballistic protective clothing: an overview. Indian J. Fibre Text. Res. 22(4), 274–291 (1997)
2. Cavallaro, P.: Soft Body Armor: An Overview of Materials, Manufacturing, Testing, and Ballistic Impact Dynamics. NUWC-NPT Technical Report 2011(1–34) (2011)10.21236/ADA549097 ↗
3. Hani, A.R.A., et al.: Body Armor Technology: A Review of Materials, Construction Techniques and Enhancement of Ballistic Energy Absorption. Adv. Mater. Res. 488–489, 806–812 (2012)10.4028/www.scientific.net/AMR.488-489.806 ↗
4. Chocron, S., et al.: Modeling unidirectional composites by bundling fibers into strips with experimental determination of shear and compression properties at high pressures. Compos. Sci. Technol. 101, 32–40 (2014)10.1016/j.compscitech.2014.06.016 ↗
5. Greenhalgh, E.S., et al.: Fractographic observations on Dyneema composites under ballistic impact. Compos. A 44, 51–62 (2013)10.1016/j.compositesa.2012.08.012 ↗
6. Wadley, et al.: Mechanisms of the penetration of ultra-high molecular weight polyethylene composite beams. Int. J. Impact Eng. (2016)
7. O’Masta, M.R., C.D., Deshpande, V.S., Wadley, H.N.G.: Indentation of polyethylene laminates by a flat-bottomed cylindrical punch. Compos. A: Appl. Sci. Manuf. 80, 138–147 (2016)10.1016/j.compositesa.2015.10.015 ↗
8. BR, S., Yen, C.F.: Analytic design trends in fabric armor. Proceedings of the 22nd international ballistics symposium. 752–760 (2005)
9. Bandaru, A.K., Vetiyatil, L., Ahmad, S.: The effect of hybridization on the ballistic impact behavior of hybrid composite armors. Compos. B Eng. 76, 300–319 (2015)10.1016/j.compositesb.2015.03.012 ↗
10. Zhou, J., Wen, P., Wang, S.: Finite element analysis of a modified progressive damage model for composite laminates under low-velocity impact. Compos. Struct. 225, 111113 (2019)10.1016/j.compstruct.2019.111113 ↗
11. Zhang, R., et al.: Ballistic performance of UHMWPE laminated plates and UHMWPE encapsulated aluminum structures: Numerical simulation. Compos. Struct. 252 (2020)10.1016/j.compstruct.2020.112686 ↗
12. Woodward, R.L.: A simple one-dimensional approach to modelling ceramic composite armour defeat. Int. J. Impact Eng 9(4), 455–474 (1990)10.1016/0734-743X(90)90035-T ↗
13. A, K.K., et al.: Numerical simulation of ceramic composite armor subjected to ballistic impact - ScienceDirect. Compos. Part B 41(8), 583–59310.1016/j.compositesb.2010.10.001 ↗
14. M. Grujicic 1∗ , B.P., U. Zecevic 1 , K. L. Koudela 2 , B. A.: Ballistic Performance of Alumina/S-2 Glass-reinforced Polymer-matrix Composite Hybrid Lightweight Armor Against Armor Piercing (ap) and Non-AP Projectiles. Multidiscip. Model. Mater. Struct. 3(3) (2006)10.1163/157361107781389562 ↗
15. Meng, S., et al.: Predicting the effective properties of 3D needled carbon/carbon composites by a hierarchical scheme with a fiber-based representative unit cell. Compos. Struct. 172, 198–209 (2017)10.1016/j.compstruct.2017.03.090 ↗
16. Jovicic, et al.: Modeling of the ballistic behavior of gradient design composite armors. Compos. A: Appl. Sci. Manuf. (2000)10.1016/S1359-835X(00)00028-2 ↗
17. Chocron, S., et al.: Modeling unidirectional composites by bundling fibers into strips with experimental determination of shear and compression properties at high pressures. Compos. Sci.. Technol. 101, 32–40 (2014)10.1016/j.compscitech.2014.06.016 ↗
18. Rao, M.P., et al.: Modeling the effects of yarn material properties and friction on the ballistic impact of a plain-weave fabric. Compos. Struct. 89(4), 556–566 (2009)10.1016/j.compstruct.2008.11.012 ↗
19. Fukushima, Y., H. Murase, and Y. Ohta, Dyneema®: Super Fiber Produced by the Gel Spinning of a Flexible Polymer (2016)10.1007/978-4-431-55203-1_7 ↗
20. Nguyen, L.H., et al.: A methodology for hydrocode analysis of ultra-high molecular weight polyethylene composite under ballistic impact. Composites Part A Applied ence & Manufacturing 84, 224–235 (2016)10.1016/j.compositesa.2016.01.014 ↗