Numerical Study on the Tensile Behavior of 3D Four Directional Cylindrical Braided Composite Shafts
Source abstract
Abstract
The tensile behavior of 3D four directional cylindrical braided composite shafts was analyzed with the numerical method. The unit cell models for the 3D four directional cylindrical braided composite shafts with various braiding angles were constructed with ABAQUS. Hashin’s failure criterion was used to analyze the tensile strength and the damage evolution of the unit cells. The influence of the braiding angle on the tensile behavior of the 3D four directional cylindrical braided composite shafts was analyzed. The numerical results showed that the tensile strength along the braiding direction increased as the braiding angle decreased. These results should play an integral role in the design of braiding composites shafts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Mechanical stress and fatigue analysis · Engineering Structural Analysis Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Bang, K.G., Lee, D.G.: Design of carbon fiber composite shafts for high speed air spindles. Compos. Struct. 55, 247–259 (2002)10.1016/S0263-8223(01)00146-5 ↗
2. Dai, G., Kim, H., Kim, J., Jin, K.: Design and manufacture of an automotive hybrid aluminum/composite drive shaft. Compos. Struct. 63, 87–99 (2004)10.1016/S0263-8223(03)00136-3 ↗
3. Reddy, P.S.K., Nagaraju, C.: Weight optimization and Finite Element Analysis of Composite automotive drive shaft for Maximum Stiffness. Mater. Today. 4, 2390–2396 (2017)10.1016/j.matpr.2017.02.088 ↗
4. Chang, M., Chen, J., Chang, C.: A simple spinning laminated composite shaft model. Int. J. Solids Struct. 41, 637–662 (2004)10.1016/j.ijsolstr.2003.09.043 ↗
5. Misri, S., Sapuan, S.M., Leman, Z., Ishak, M.R.: Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts. Mater. Design. 65, 953–960 (2015)10.1016/j.matdes.2014.09.073 ↗
6. Hao, W., Ge, D., Ma, Y., Yao, X., Shi, Y.: Experimental investigation on deformation and strength of carbon/epoxy laminated curved beams. Polym. Test. 31, 520–526 (2012)10.1016/j.polymertesting.2012.02.003 ↗
7. Hao, W., Tang, C., Yuan, Y., Ma, Y.: Investigation of dynamic mode I matrix crack-fiber bundle interaction in composites using caustics. Compos. Part B-Eng. 92, 395–404 (2016)10.1016/j.compositesb.2016.02.045 ↗
8. Hao, W., Yuan, Y., Yao, X., Ma, Y.: Computational analysis of fatigue behavior of 3D 4-directional braided composites based on unit cell approach. Adv. Eng. Softw. 82, 38–52 (2015)10.1016/j.advengsoft.2014.12.007 ↗
9. Tarnopol'Skii, Y.M., Kulakov, V.L., Zakrzhevskii, A.M., Mungalov, D.D.: Textile composite rods operating in torsion. Compos. Sci. Technol. 56, 339–345 (1996)10.1016/0266-3538(95)00117-4 ↗
10. Kuo, W., Chen, H.: Fabrication and microgeometry of two-step braided composites incorporating pultruded rods. Compos. Sci. Technol. 57, 1457–1467 (1997)10.1016/S0266-3538(97)00066-3 ↗
11. Zhang, C., Xu, X.: Finite element analysis of 3D braided composites based on three unit-cells models. Compos. Struct. 98, 130–142 (2013)10.1016/j.compstruct.2012.11.003 ↗
12. Wu, L., Gu, B., Sun, B.: Finite element analyses of four-step 3D braided composite bending damage using repeating unit cell model. Int. J. Damage Mech. 24, 59–75 (2014)10.1177/1056789514521052 ↗
13. Lu, Z., Xia, B., Yang, Z.: Investigation on the tensile properties of three-dimensional full five-directional braided composites. Comput. Mater. Sci. 77, 445–455 (2013)10.1016/j.commatsci.2013.04.010 ↗
14. Zhang, D., Chen, L., Sun, Y., Wang, X.: Transverse tensile damage behaviors of three-dimensional five-directional braided composites by meso-scale finite element approach. J. Reinf. Plast. Comp. 34, 1202–1220 (2015)10.1177/0731684415587350 ↗
15. Fang, G., Liang, J., Lu, Q., Wang, B., Wang, Y.: Investigation on the compressive properties of the three dimensional four-directional braided composites. Compos. Struct. 93, 392–405 (2011)10.1016/j.compstruct.2010.09.002 ↗
16. Zhou, L.D., Zhuang, Z.: Strength analysis of three-dimensional braided T-shaped composite structures. Compos. Struct. 104, 162–168 (2013)10.1016/j.compstruct.2013.04.023 ↗
17. Li, X., Liu, Z., Hu, L., Wang, Y., Lei, B., Huang, X.: Numerical investigation of T-joints with 3d four directional braided composite fillers under tensile loading. Appl. Compos. Mater. 24, 171–191 (2017)10.1007/s10443-016-9520-5 ↗
18. Guo, Q., Zhang, G., Li, J.: Process parameters design of a three-dimensional and five-directional braided composite joint based on finite element analysis. Mater. Design. 46, 291–300 (2013)10.1016/j.matdes.2012.10.025 ↗
19. Huang, X., Liu, Y., Hao, W., Liu, Y., Zhu, J.: Computational analysis of torsional bulking behavior of 3d 4-directional braided composites shafts. Appl. Compos. Mater. (2017). https://doi.org/10.1007/s10443-017-9616-610.1007/s10443-017-9616-6 ↗
20. Hao, W., Liu, Y., Huang, X., Liu, Y., Zhu, J.: A unit-cell model for predicting the elastic constants of 3d four directional cylindrical braided composite shafts. Appl. Compos. Mater. (2017). https://doi.org/10.1007/s10443-017-9639-z10.1007/s10443-017-9639-z ↗
21. Hwan, C., Tsai, K., Chen, W., Sun, S.: Predicting the elastic moduli of three-dimensional (four-step) braided tubes using a spatial spring model. J. Compos. Mater. 47, 991–1000 (2012)10.1177/0021998312444148 ↗
22. Lei, B., Liu, Z., Ya, J., Wang, Y., Li, X.: Bearing abilities and progressive damage analysis of three dimensional four-directional braided composites with cut-edge. Appl. Compos. Mater. 23, 839–856 (2016)10.1007/s10443-016-9488-1 ↗
23. Fang, G., Liang, J., Wang, B., Wang, Y.: Effect of interface properties on mechanical behavior of 3d four-directional braided composites with large braid angle subjected to uniaxial tension. Appl. Compos. Mater. 18, 449–465 (2011)10.1007/s10443-010-9175-6 ↗
24. Wang, B., Fang, G., Liang, J., Wang, Z.: Failure locus of 3D four-directional braided composites under biaxial loading. Appl. Compos. Mater. 19, 529–544 (2012)10.1007/s10443-011-9206-y ↗
25. Wang, Y., Liu, Z., Lei, B., Huang, X., Li, X.: Investigation on the bearing abilities of three-dimensional full five-directional braided composites with cut-edge. Appl. Compos. Mater. 24, 893–910 (2017)10.1007/s10443-016-9558-4 ↗
26. Wang, Y.Q., Wang, A.S.D.: Spatial distribution of yarns and mechanical properties in 3D braided tubular composites. Appl. Compos. Mater. 4, 121–132 (1997)10.1023/A:1008855106973 ↗
27. Wang, Y.Q., Wang, A.S.D.: On the topological yarn structure of 3-D rectangular and tubular braided preforms. Compos. Sci. Technol. 51, 575–586 (1994)10.1016/0266-3538(94)90090-6 ↗
28. Gideon, R.K., Zhou, H., Wu, X., Sun, B., Gu, B.: Finite element analysis of 3D circular braided composites tube damage based on three unit cell models under axial compression loading. Int. J. Damage Mech. 25, 574–607 (2015)10.1177/1056789515605568 ↗
29. Gideon, R.K., Zhou, H., Li, Y., Sun, B., Gu, B.: Quasi-static compression and compression–compression fatigue characteristics of 3D braided carbon/epoxy tube. J. Text. I. 107, 938–948 (2016)10.1080/00405000.2015.1071964 ↗