Effects of Temperature, Oxidation and Fiber Preforms on Fatigue Life of Carbon Fiber-Reinforced Ceramic-Matrix Composites
Source abstract
Abstract
In this paper, the effects of temperature, oxidation and fiber preforms on the fatigue life of carbon fiber-reinforced silicon carbide ceramic-matrix composites (C/SiC CMCs) have been investigated. An effective coefficient of the fiber volume fraction along the loading direction (ECFL) was introduced to describe the fiber architecture of preforms. Under cyclic fatigue loading, the fibers broken fraction was determined by combining the interface wear model and fibers statistical failure model at room temperature, and interface/fibers oxidation model, interface wear model and fibers statistical failure model at elevated temperatures in the oxidative environments. When the broken fibers fraction approaches to the critical value, the composites fatigue fracture. The fatigue life S–N curves and fatigue limits of unidirectional, cross-ply, 2D, 2.5D and 3D C/SiC composites at room temperature, 800 °C in air, 1100, 1300 and 1500 °C in vacuum conditions have been predicted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Innovative concrete reinforcement materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos Sci Technol 64, 155–170 (2004). doi: 10.1016/S0266-3538(03)00230-610.1016/S0266-3538(03)00230-6 ↗
2. Schmidt, S., Beyer, S., Knabe, H., Immich, H., Meistring, R., Gessler, A.: Advanced ceramic matrix composite materials for current and future propulsion system applications. Acta Astronaut 55, 409–420 (2004). doi: 10.1016/j.actaastro.2004.05.05210.1016/j.actaastro.2004.05.052 ↗
3. DiCarlo, J.A., Van Roode, M.: Ceramic composite development for gas turbine hot section components. Proc ASME Turbo Expo Power Land Sea Air 2, 221–231 (2006)
4. Stephen, T.: General Electric primes CMC for turbine blades. Flight International, 2010. http://www.flightglobal.com/news/articles/general-electric-primes-cmc-for-turbine-blades-349834/
5. Gowayed, Y., Ojard, G., Santhosh, U., Jefferso, G.: Modeling of crack density in ceramic matrix composites. J Compos Mater 49, 2285–2294 (2015). doi: 10.1177/002199831454518810.1177/0021998314545188 ↗
6. Li, L.B.: Fatigue hysteresis of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Appl Compos Mater 23, 1–27 (2016). doi: 10.1007/s10443-015-9448-110.1007/s10443-015-9448-1 ↗
7. Li, L.B.: Modeling fatigue hysteresis behavior of unidirectional C/SiC ceramic-matrix composite. Compos Part B 66, 466–474 (2014). doi: 10.1016/j.compositesb.2014.06.01410.1016/j.compositesb.2014.06.014 ↗
8. Li, L.B.: Fatigue life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Part I: Experimental analysis. Appl Compos Mater 23, 101–117 (2016). doi: 10.1007/s10443-015-9446-310.1007/s10443-015-9446-3 ↗
9. Li, L.B.: Fatigue life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Part II: Experimental comparisons. Appl Compos Mater 22, 961–972 (2015). doi: 10.1007/s10443-015-9445-4 .10.1007/s10443-015-9445-4 ↗
10. Curtin, W.A., Ahn, B.K., Takeda, N.: Modeling brittle and tough stress–strain behavior in unidirectional ceramic matrix composites. Acta Mater 46, 3409–3420 (1998). doi: 10.1016/S1359-6454(98)00041-X10.1016/S1359-6454(98)00041-X ↗
11. Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta Metall Mater 43, 859–875 (1995). doi: 10.1016/0956-7151(94)00304-Z10.1016/0956-7151(94)00304-Z ↗
12. Lee, S.S., Stinchcomb, W.W.: Damage mechanisms of cross-ply Nicalon/CAS-II laminate under cyclic tension. Ceram Eng Sci Proc 15, 40–48 (1994). doi: 10.1002/9780470314500.ch510.1002/9780470314500.ch5 ↗
13. Lara-Curzio, E.: Analysis of oxidation-assisted stress-rupture of continuous fiber-reinforced ceramic matrix composites at intermediate temperatures. Compos Part A 30, 549–554 (1999). doi: 10.1016/S1359-835X(98)00148-110.1016/S1359-835X(98)00148-1 ↗
14. Casas, L., Martinez-Esnaola, J.M.: Modelling the effect of oxidation on the creep behavior of fiber-reinforced ceramic matrix composites. Acta Mater 51, 3745–3757 (2003). doi: 10.1016/S1359-6454(03)00189-710.1016/S1359-6454(03)00189-7 ↗
15. Li, L.B.: Fatigue damage models and life prediction of long-fiber-reinforced ceramic matrix composites. PhD Thesis, Nanjing University of Aeronautics and Astronautics, Nanjing, China, 2010.
16. Shuler, S.F., Holmes, J.W., Wu, X.: Influence of loading frequency on the room-temperature fatigue of a carbon-fiber/SiC-matrix composite. J Am Ceram Soc 76, 2327–2336 (1993). doi: 10.1111/j.1151-2916.1993.tb07772.x10.1111/j.1151-2916.1993.tb07772.x ↗
17. Mall, S., Engesser, J.M.: Effects of frequency on fatigue behavior of CVI C/SiC at elevated temperature. Compos Sci Technol 66, 863–874 (2006). doi: 10.1016/j.compscitech.2005.06.02010.1016/j.compscitech.2005.06.020 ↗
18. Zhang, C.Y., Wang, X.W., Liu, Y.S., Wang, B., Han, D.: Tensile fatigue of a 2.5D-C/SiC composite at room temperature and 900°C. Mater. Design 49, 814–819 (2013). doi: 10.1016/j.matdes.2013.01.07610.1016/j.matdes.2013.01.076 ↗
19. Yang, F.S.: Research on fatigue behavior of 2.5d woven ceramic matrix composites. Master Thesis, Nanjing: Nanjing University of Aeronautics and Astronautics, 2011.
20. Du, S.M., Qiao, S.R., Ji, G.C., Han, D.: Tension-tension fatigue behavior of 3D-C/SiC composite at room temperature and 1300°C. J Mater Eng 9, 22–25 (2002)
21. Liu, X.F.: Tension-tension fatigue behavior of 3D-C/SiC composite at elevated temperature. Master Thesis, Northwestern Polytechnic University 2003.
22. Du, S.M., Qiao, S.R.: Tension-tension fatigue behavior of 3D-C/SiC composite at 1500°C. J Mater Eng 5, 34–36 (2011)