Experimental Investigation of the Strain Rate Dependent Behaviour of 2D Biaxially and Triaxially Reinforced Braided Composites
Source abstract
Abstract
The performance of 2D biaxially and triaxially reinforced braided carbon fibre composites under dynamic loading is evaluated in the presented study. The accurate manufacturing of tensile specimen made of braided sleeves is explained particularly with regard to efficiency and reproducibility. In order to determine reliable strain rate dependent properties, the high-speed testing procedure is discussed. Using five materials, the parameter identification is described and relevant material data is provided. The measured stiffnesses and strengths are used to predict the non-linear stress-strain behaviour with an earlier proposed phenomenological damage model for textile composites. The gained orthotropic property-profile provides the input parameters for a numerical analysis of braided composite components using the calibrated model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis and Optimization · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Ayranci, C., Carey, J.: 2D braided composites: a review for stiffness critical applications. Compos. Struct. 85, 43–58 (2008)10.1016/j.compstruct.2007.10.004 ↗
2. Greve, L., Pickett, A.K., Payen, F.: Experimental testing and phenomenological modelling of the fragmentation process of braided carbon/epoxy composite tubes under axial and oblique impact. Composites: Part B 39, 1221–1232 (2008)10.1016/j.compositesb.2008.02.002 ↗
3. Hufenbach, W., Kroll, L., Böhm, R., Langkamp, A., Czulak, A.: Development of piping elements from textile reinforced composite materials for chemical apparatus construction. J. Mater. Process. Technol. 175, 231–240 (2006)10.1016/j.jmatprotec.2005.04.012 ↗
4. Tang, Z.X., Postle, R.: Mechanics of three-dimensional braided structures for composite materials. Part II: prediction of the elastic moduli. Compos. Struct. 55, 451–457 (2002)
5. Cox, B.N., Davis, J.B.: Braided composites for energy absorption under tensile loading. J. Mater. Sci. 35, 3467–3478 (2000)10.1023/A:1004888824424 ↗
6. Tang, Z.X., Postle, R.: Mechanics of three-dimensional braided structures for composite materials. Part III: nonlinear finite element deformation analysis. Compos. Struct. 55, 307–317 (2002)10.1016/S0263-8223(01)00155-6 ↗
7. Gu, B., Xu, J.: Finite element calculation of 4-step 3-dimensional braided composite under ballistic perforation. Composites: Part B 35, 291–297 (2004)10.1016/j.compositesb.2004.01.001 ↗
8. Fang, G., Liang, J., Lu, Q., Wang, B., Wang, Y.: Investigation on the compressive properties of the three dimensional four-directional braided composites. Compos. Struct. 93, 392–405 (2011)10.1016/j.compstruct.2010.09.002 ↗
9. McGregor, C., Vaziri, R., Xiao, X.: Finite element modelling of the progressive crushing of braided composite tubes under axial impact. Int. J. Impact Eng. 37, 662–672 (2010)10.1016/j.ijimpeng.2009.09.005 ↗
10. Fouinneteau, M.: Damage and failure modelling of carbon and glass 2D braided composites. PhD thesis, Univerity of Cranfield (2006)
11. Yang, Q.D., Cox, B.: Predicting failure in textile composites using the Binary Model with gauge-averaging. Eng. Fract. Mech. 77, 3174–3189 (2010)10.1016/j.engfracmech.2010.08.004 ↗
12. Böhm, R., Gude, M., Hufenbach, W.: A phenomenologically based damage model for textile composites with crimped reinforcement. Compos. Sci. Technol. 70, 81–87 (2010)10.1016/j.compscitech.2009.09.008 ↗
13. Hufenbach, W., Böhm, R., Blazejewski, W., Kroll, L., Czulak, A.: Manufacture, design, and testing of piping elements from braided composites. Chem. Eng. Technol. 28, 808–813 (2005)10.1002/ceat.200500016 ↗
14. Hufenbach, W., Blazejewski, W., Kroll, L., Böhm, R., Gude, M., Czulak, A.: Manufacture and multiaxial test of composite tube specimens with braided glass fiber reinforcement. J. Mater. Process. Technol. 162, 65–70 (2005)10.1016/j.jmatprotec.2005.02.212 ↗
15. Chiu, C.H., Tsai, K.H., Huang, W.J.: Crush-failure modes of 2D triaxially braided hybrid composite tubes. Compos. Sci. Technol. 59, 1713–1723 (1999)10.1016/S0266-3538(99)00036-6 ↗
16. Salvi, A.G., Waas, A.M., Caliskan, A.: Rate dependent compressive response of 2D triaxially braided carbon fiber composites and the effects of resin on the interfacial shear strength. Composites: Part A 40, 19–27 (2009)10.1016/j.compositesa.2008.09.016 ↗
17. Li, D.S., Lu, Z.X., Fang, D.N.: Longitudinal compressive behavior and failure mechanism of three-dimensional five-directional carbon/phenolic braided composites at high strain rates. Mater. Sci. Eng. A 526, 134–139 (2009)10.1016/j.msea.2009.07.009 ↗
18. Gu, B., Chang, F.K.: Energy absorption features of 3-D braided rectangular composite under different strain rates compressive loading. Aerosp. Sci. Technol. 11, 535–545 (2007)10.1016/j.ast.2007.03.004 ↗
19. Subhash, G., Sulibhavi, S., Zikry, M.A.: Influence of strain-rate on the uniaxial compressive behavior of 2-D braided textile composites. Composites: Part A 32, 1583–1591 (2001)10.1016/S1359-835X(01)00011-2 ↗
20. Hamada, H., Kameo, K., Sakaguchi, M., Saito, H., Iwamoto, M.: Energy-absorption properties of braided composite rods. Compos. Sci. Technol. 60, 723–729 (2000)10.1016/S0266-3538(99)00182-7 ↗
21. Sun, B., Liu, F., Gu, B.: Influence of the strain rate on the uniaxial tensile behavior of 4-step 3D braided composites. Composites: Part A 36, 1477–1485 (2005)10.1016/j.compositesa.2005.03.012 ↗
22. Ivanov, D.S., Baudry, F., van den Broucke, B., Lomov, S.V., Xie, H., Verpoest, I.: Failure analysis of triaxial braided composite. Compos. Sci. Technol. 69, 1372–1380 (2009)10.1016/j.compscitech.2008.09.013 ↗
23. Böhm, R., Hufenbach, W.: Experimentally based strategy for damage analysis of textile-reinforced composites under static loading. Compos. Sci. Technol. 70, 1330–1337 (2010)10.1016/j.compscitech.2010.04.008 ↗
24. Johnson, G.R., Cook, W.H.: Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng. Fract. Mech. 21, 31–48 (1985)10.1016/0013-7944(85)90052-9 ↗
25. Hufenbach, W., Hornig, A., Zhou, B., Langkamp, A., Gude, M.: Determination of strain rate dependent through-thickness tensile properties of textile reinforced thermoplastic composites using L-shaped beam specimens. Compos. Sci. Technol. 71, 1110–1116 (2011)10.1016/j.compscitech.2011.03.018 ↗
26. Hufenbach, W., Gude, M., Ebert, C., Zscheyge, M., Hornig, A.: Strain rate dependent low velocity impact response of layerwise 3D-reinforced composite structures. Int. J. Impact Eng. 38, 358–368 (2011)10.1016/j.ijimpeng.2010.12.004 ↗
27. Hufenbach, W., Renner, O., Bochynek, R., Hornig, A.: The influence of textile architecture on the strain-rate dependent material behaviour of carbon fibre-reinforced composites under bending loading. In: Proceedings of the 15th European Conference on Composite Materials (ECCM15), pp. 24–28. Venice, Italy (2012)
28. Brune, M., Oppermann, H.: Anforderungen an Simulationsmethoden für die Auslegung von CFK-Strukturen im Automobilbau. CCeV Automotive Forum. Neckarsulm, Germany, 23th/24th June 2010
29. Yen, C.F.: Ballistic impact modeling of composite materials. In: 7th International LS-DYNA Users Conference, pp. 615–626 (2001)
30. Astanin, V.V., Shchegel, G.O., Hufenbach, W., Hornig, A., Langkamp, A.: Characterising failure in textile-reinforced thermoplastic composites by electromagnetic emission measurements under medium and high velocity impact loading. Int. J. Impact Eng. 49, 22–30 (2012)10.1016/j.ijimpeng.2012.05.001 ↗
31. Cuntze, R.G.: Strength failure conditions of the various structural materials: is there some common basis existing? SDHM 3(2), 87–106 (2007)