Effect of Fiber Poisson Contraction on Matrix Multicracking Evolution of Fiber-Reinforced Ceramic-Matrix Composites
Source abstract
Abstract
An analytical methodology has been developed to investigate the effect of fiber Poisson contraction on matrix multicracking evolution of fiber-reinforced ceramic-matrix composites (CMCs). The modified shear-lag model incorporated with the Coulomb friction law is adopted to solve the stress distribution in the interface slip region and intact region of the damaged composite. The critical matrix strain energy criterion which presupposes the existence of an ultimate or critical strain energy limit beyond which the matrix fails has been adopted to describe matrix multicracking of CMCs. As more energy is placed into the composite, matrix fractures and the interface debonding occurs to dissipate the extra energy. The interface debonded length under the process of matrix multicracking is obtained by treating the interface debonding as a particular crack propagation problem along the fiber/matrix interface. The effects of the interfacial frictional coefficient, fiber Poisson ratio, fiber volume fraction, interface debonded energy and cycle number on the interface debonding and matrix multicracking evolution have been analyzed. The theoretical results are compared with experimental data of unidirectional SiC/CAS, SiC/CAS-II and SiC/Borosilicate composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos. Sci. Technol. 64, 155–170 (2004). doi: 10.1016/S0266-3538(03)00230-610.1016/S0266-3538(03)00230-6 ↗
2. Schmidt, S., Beyer, S., Knabe, H., Immich, H., Meistring, R., Gessler, A.: Advanced ceramic matrix composite materials for current and future propulsion system applications. Acta Astronaut. 55, 409–420 (2004). doi: 10.1016/j.actaastro.2004.05.05210.1016/j.actaastro.2004.05.052 ↗
3. DiCarlo, J.A., Van Roode, M.: Ceramic composite development for gas turbine hot section components. Proc. ASME Turbomach. Export.: Power Land Sea Air 2, 221–231 (2006)
4. Stephen, T.: General Electric primes CMC for turbine blades. Flight International, 2010. http://www.flightglobal.com/news/articles/general-electric-primes-cmc-for-turbine-blades-349834/
5. Zhang, L.T., Cheng, L.F., Luan, X.G., Mei, H., Xu, Y.D.: Environmental performance testing system for thermostructure materials applied in aeroengines. Key. Eng. Mater. 313, 183–190 (2006). doi: 10.4028/www.scientific.net/KEM.313.18310.4028/www.scientific.net/KEM.313.183 ↗
6. Curtin, W.A., Ahn, B.K., Takeda, N.: Modeling brittle and tough stress-strain behavior in unidirectional ceramic matrix composites. Acta Mater. 46, 3409–3420 (1998). doi: 10.1016/S1359-6454(98)00041-X10.1016/S1359-6454(98)00041-X ↗
7. Solti, J.P., Mall, S., Robertson, D.D.: Modeling damage in unidirectional ceramic-matrix composites. Compos. Sci. Technol. 54, 55–66 (1995). doi: 10.1016/0266-3538(95)00041-010.1016/0266-3538(95)00041-0 ↗
8. Daniel, I.M., Anastassopoulos, G., Lee, J.-W.: The behavior of ceramic matrix fiber composites under longitudinal loading. Compos. Sci. Technol. 46, 105–113 (1993). doi: 10.1016/0266-3538(93)90166-E10.1016/0266-3538(93)90166-E ↗
9. Aveston, J., Cooper, G.A., Kelly, A.: Single and multiple fracture. Properties of fiber composites: conference on proceedings. England: Nat. Phys. Lab. IPC. 15–26 (1971).
10. Zok, F.W., Spearing, S.M.: Matrix crack spacing in brittle matrix composites. Acta Metall. Mater. 40, 2033–2043 (1992). doi: 10.1016/0956-7151(92)90189-L10.1016/0956-7151(92)90189-L ↗
11. Zhu, H., Weitsman, Y.: The progression of failure mechanisms in unidirectional reinforced ceramic composites. J. Mech. Phys. Solids 42, 1601–1632 (1994). doi: 10.1016/0022-5096(94)90089-210.1016/0022-5096(94)90089-2 ↗
12. Curtin, W.A.: Multiple matrix cracking in brittle matrix composites. Acta Metall. Mater 41, 1369–1377 (1993). doi: 10.1016/0956-7151(93)90246-O10.1016/0956-7151(93)90246-O ↗
13. Gao, Y.C., Mai, Y., Cotterell, B.: Fracture of fiber-reinforced materials. J. Appl. Math. Phys. 39, 550–572 (1988). doi: 10.1007/BF0094896210.1007/BF00948962 ↗
14. Stang, H., Shah, S.: Failure of fiber-reinforced composites by pull-out fracture. J. Mater. Sci. 21, 953–957 (1986). doi: 10.1007/BF0111737810.1007/BF01117378 ↗
15. Chiang, Y.C.: On a matrix cracking model using Coulomb’s friction law. Eng. Fract. Mech. 74, 1602–1616 (2007). doi: 10.1016/j.engfracmech.2006.09.00610.1016/j.engfracmech.2006.09.006 ↗
16. Hsueh, C.H.: Crack-wake interface debonding criterion for fiber-reinforced ceramic composites. Acta Mater. 44, 2211–2216 (1996). doi: 10.1016/1359-6454(95)00369-X10.1016/1359-6454(95)00369-X ↗
17. Sun, Y.J., Singh, R.N.: The generation of multiple matrix cracking and fiber-matrix interfacial debonding in a glass composite. Acta Mater. 46, 1657–1667 (1998). doi: 10.1016/S1359-6454(97)00347-910.1016/S1359-6454(97)00347-9 ↗
18. Pryce, A.W., Smith, P.A.: Matrix cracking in unidirectional ceramic matrix composites under quasi-static and cyclic loading. Acta Metall. Mater. 41, 1269–1281 (1993). doi: 10.1016/0956-7151(93)90178-U10.1016/0956-7151(93)90178-U ↗
19. Beyerle, D.S., Spearing, S.M., Evans, A.G.: Damage mechanisms and mechanical properties of a laminated 0/90 ceramic/matrix composite. J. Am. Ceram. Soc. 75, 3321–3330 (1992). doi: 10.1111/j.1151-2916.1992.tb04428.x10.1111/j.1151-2916.1992.tb04428.x ↗
20. Okabe, T., Komotori, J., Shimizu, M., Takeda, N.: Mechanical behavior of SiC fiber reinforced brittle-matrix composites. J. Mater. Sci. 34, 3405–3412 (1999). doi: 10.1023/A:100463730031010.1023/A:1004637300310 ↗
21. Rouby, D., Reynaud, P.: Fatigue behavior related to interface modification during load cycling in ceramic matrix fiber composites. Compos. Sci. Technol. 48, 109–118 (1993). doi: 10.1016/0266-3538(93)90126-210.1016/0266-3538(93)90126-2 ↗
22. Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta Metall. Mater. 43, 859–875 (1995). doi: 10.1016/0956-7151(94)00304-Z10.1016/0956-7151(94)00304-Z ↗
23. Reynaud, P.: Cyclic fatigue of ceramic-matrix composites at ambient and elevated temperatures. Compos. Sci. Technol. 56, 809–814 (1996). doi: 10.1016/0266-3538(96)00025-510.1016/0266-3538(96)00025-5 ↗
24. Zhu, S., Mizuno, M., Kagawa, Y., Mutoh, Y.: Monotonic tension, fatigue and creep behavior of SiC-fiber reinforced SiC-matrix composites: a review. Compos. Sci. Technol. 59, 833–851 (1999). doi: 10.1016/S0266-3538(99)00014-710.1016/S0266-3538(99)00014-7 ↗
25. Fantozzi, G., Reynaud, P.: Mechanical hysteresis in ceramic matrix composites. Math. Sci. Eng. A 521–522, 18–23 (2009). doi: 10.1016/jmsea.2008.09.12810.1016/j.msea.2008.09.128 ↗
26. Li, L.B., Song, Y.D.: An approach to estimate interface shear stress of ceramic matrix composites from hysteresis loops. Appl. Compos. Mater. 17, 309–328 (2010). doi: 10.1007/s10443-009-9122-610.1007/s10443-009-9122-6 ↗
27. Li, L.B., Song, Y.D., Sun, Y.C.: Estimate interface shear stres of unidirectional C/SiC ceramic matrix composites from hysteresis loops. Appl. Compos. Mater. 20, 693–707 (2013). doi: 10.1007/s10443-012-9297-010.1007/s10443-012-9297-0 ↗
28. Li, L.B., Song, Y.D.: Estimate interface stress of woven ceramic matrix composites from hysteresis loops. Appl. Compos. Mater. 20, 993–1005 (2013). doi: 10.1007/s10443-013-9314-y10.1007/s10443-013-9314-y ↗
29. Rouby, D., Louet, N.: The frictional interface: a tribological approach of thermal misfit, surface roughness and sliding velocity effects. Compos. Part A 33, 1453–1459 (2002). doi: 10.1016/S1359-835X(02)00145-810.1016/S1359-835X(02)00145-8 ↗
30. Holmes, J.W., Cho, C.D.: Experimental observations of frictional heating in fiber-reinforced ceramics. J. Am. Ceram. Soc. 75, 929–938 (1992). doi: 10.1111/j.1151-2916.1992.tb04162.x10.1111/j.1151-2916.1992.tb04162.x ↗
31. Cho, C.D., Holmes, J.W., Barber, J.R.: Estimation of interfacial shear in ceramic composites from frictional heating measurements. J. Am. Ceram. Soc. 74, 2802–2808 (1991). doi: 10.1111/j.1151-2916.1991.tb06846.x10.1111/j.1151-2916.1991.tb06846.x ↗
32. Vagaggini, E., Domergue, J.M., Evans, A.G.: Relationships between hysteresis measurements and the constituent properties of ceramic matrix composites: I, theory. J. Am. Ceram. Soc. 78, 2709–2720 (1995). doi: 10.1111/j.1151-2916.1995.tb08046.x10.1111/j.1151-2916.1995.tb08046.x ↗