Damage Monitoring of Unidirectional C/SiC Ceramic-Matrix Composite under Cyclic Fatigue Loading using A Hysteresis Loss Energy-Based Damage Parameter at Room and Elevated Temperatures
Source abstract
Abstract
The damage evolution of unidirectional C/SiC ceramic-matrix composite (CMC) under cyclic fatigue loading has been investigated using a hysteresis loss energy-based damage parameter at room and elevated temperatures. The experimental fatigue hysteresis modulus and fatigue hysteresis loss energy versus cycle number have been analyzed. By comparing the experimental fatigue hysteresis loss energy with theoretical computational values, the interface shear stress corresponding to different cycle number and peak stress has been estimated. The experimental evolution of fatigue hysteresis loss energy and fatigue hysteresis loss energy-based damage parameter versus cycle number has been predicted for unidirectional C/SiC composite at room and elevated temperatures. The predicted results of interface shear stress degradation, stress–strain hysteresis loops corresponding to different number of applied cycles, fatigue hysteresis loss energy and fatigue hysteresis loss energy-based damage parameter as a functions of cycle number agreed with experimental data. It was found that the fatigue hysteresis energy-based parameter can be used to monitor the fatigue damage evolution and predict the fatigue life of fiber-reinforced CMCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Fire effects on concrete materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos. Sci. Technol. 64, 155–170 (2004). doi: 10.1016/S0266-3538(03)00230-610.1016/S0266-3538(03)00230-6 ↗
2. Schmidt, S., Beyer, S., Knabe, H., Immich, H., Meistring, R., Gessler, A.: Advanced ceramic matrix composite materials for current and future propulsion system applications. Acta Astronaut. 55, 409–420 (2004). doi: 10.1016/j.actaastro.2004.05.05210.1016/j.actaastro.2004.05.052 ↗
3. DiCarlo, J.A., Van Roode, M.: Ceramic composite development for gas turbine hot section components. Proc. ASME Turbo Expo Power Land Sea Air 2, 221–231 (2006)
4. Stephen, T.: General Electric primes CMC for turbine blades. Flight International, 2010. http://www.flightglobal.com/news/articles/general-electric-primes-cmc-for-turbine-blades-349834/ .
5. Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta Metall. Mater. 43, 859–875 (1995). doi: 10.1016/0956-7151(94)00304-Z10.1016/0956-7151(94)00304-Z ↗
6. Morscher, G.N.: Modal acoustic emission of damage accumulation in a woven SiC/SiC composite. Compos. Sci. Technol. 59, 687–697 (1999). doi: 10.1016/S0266-3538(98)00121-310.1016/S0266-3538(98)00121-3 ↗
7. Gyekenyesi, A.L., Morscher, G.N., Cosgriff, L.M.: In situ monitoring of damage in SiC/SiC composites using acousto-ultrasonics. Compos. Part B 37, 47–53 (2006). doi: 10.1016/j.compositesb.2005.05.01010.1016/j.compositesb.2005.05.010 ↗
8. Morscher, G.N., Singh, M., Kiser, J.D., Freedman, M., Bhatt, R.: Modeling stress-dependent matrix cracking and stress–strain behavior in 2D woven SiC fiber reinforced CVI SiC composites. Compos. Sci. Technol. 67, 1009–1017 (2007). doi: 10.1016/j.compscitech.2006.06.00710.1016/j.compscitech.2006.06.007 ↗
9. Maillet, E., Godin, N., R’Mili, M., Reynaud, P., Fantozzi, G., Lamon, J.: Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission. Compos. Part A 57, 8–15 (2014). doi: 10.1016/j.compositesa.2013.10.01010.1016/j.compositesa.2013.10.010 ↗
10. Momon, S., Moevus, M., Godin, N., R’Mili, M., Reynaud, P., Fantozzi, G., Fayolle, C.: Acoustic emission and lifetime prediction during static fatigue tests on ceramic-matrix composite at high temperature under air. Compos. Part A 41, 913–918 (2010). doi: 10.1016/j.compositesa.2010.03.00810.1016/j.compositesa.2010.03.008 ↗
11. Maillet, E., Godin, N., R’Mili, M., Reynaud, P., Lamon, J., Fantozzi, G.: Analysis of acoustic emission release during static fatigue tests at intermediate temperatures on ceramic matrix composites: towards rupture time prediction. Compos. Sci. Technol. 72, 1001–1007 (2012). doi: 10.1016/j.compscitech.2012.03.01110.1016/j.compscitech.2012.03.011 ↗
12. Xia, Z.H., Sujidkul, T., Niu, J.B., Smith, C.E., Morscher, G.N.: Modeling of electromechanical behavior of woven SiC/SiC composites. Compos. Part A 43, 1730–1737 (2012). doi: 10.1016/j.compositesa.2012.03.02010.1016/j.compositesa.2012.03.020 ↗
13. Dassios, K.G., Aggelis, D.G., Kordatos, E.Z., Matikas, T.E.: Cyclic loading of a SiC-fiber reinforced ceramic matrix composite reveals damage mechanisms and thermal residual stress state. Compos. Part A 44, 105–113 (2013). doi: 10.1016/j.compositesa.2012.06.01110.1016/j.compositesa.2012.06.011 ↗
14. Kordatos, E.Z., Aggelis, D.G., Dassios, K.G., Matikas, T.E.: In-situ monitoring of damage evolution in glass matrix composites during cyclic loading using nondestructive techniques. Appl. Compos. Mater. 20, 961–973 (2013). doi: 10.1007/s10443-013-9313-z10.1007/s10443-013-9313-z ↗
15. Tracy, J., Wass, A., Daly, S.: A new experimental approach for in situ damage assessment in fibrous ceramic matrix composites at high temperature. J. Am. Ceram. Soc. 96, 1898–1906 (2015). doi: 10.1111/jace.1353810.1111/jace.13538 ↗
16. Holmes, J.W., Cho, C.D.: Experimental observations of frictional heating in fiber-reinforced ceramics. J. Am. Ceram. Soc. 75, 929–938 (1992). doi: 10.1111/j.1151-2916.1992.tb04162.x10.1111/j.1151-2916.1992.tb04162.x ↗
17. Rouby, D., Reynaud, P.: Fatigue behavior related to interface modification during load cycling in ceramic-matrix fiber composites. Compos. Sci. Technol. 48, 109–118 (1993). doi: 10.1016/0266-3538(93)90126-210.1016/0266-3538(93)90126-2 ↗
18. Reynaud, P.: Cyclic fatigue of ceramic-matrix composites at ambient and elevated temperatures. Compos. Sci. Technol. 56, 809–814 (1996). doi: 10.1016/0266-3538(96)00025-510.1016/0266-3538(96)00025-5 ↗
19. Fantozzi, G., Reynaud, P.: Mechanical hysteresis in ceramic matrix composites. Mater. Sci. Eng. A 521–522, 18–23 (2009). doi: 10.1016/j.msea.2008.09.12810.1016/j.msea.2008.09.128 ↗
20. Li, L.B.: Estimate interface shear stress of unidirectional C/SiC ceramic matrix composites from hysteresis loops. Appl. Compos. Mater. 20, 693–707 (2013). doi: 10.1007/s10443-012-9297-010.1007/s10443-012-9297-0 ↗
21. Li, L.B.: Fatigue hysteresis behavior of cross-ply C/SiC ceramic matrix composites at room and elevated temperatures. Mater. Sci. Eng. A 586, 160–170 (2013). doi: 10.1016/j.msea.2013.08.01710.1016/j.msea.2013.08.017 ↗
22. Li, L.B.: Fatigue damage models and life prediction of long-fiber-reinforced ceramic-matrix composites (Ph.D. thesis), Nanjing University of Aeronautics and Astronautics, Nanjing, 2011 (in Chinese).