Role of Tool-Part Interaction in Consolidation of L-Shaped Laminates during Autoclave Process
Source abstract
Abstract
The role of tool-part interaction in the consolidation process of the L-shaped laminate was studied using a finite element model. The tool-part shear actions during processing were modeled by introducing shear layers. The predicted data demonstrate the necessity of considering the slippage between the tools and the laminate in simulations. A parametric study examining the effects of the shear layer properties on the compacting behavior was performed and the results show that improving the slippage ability of the male mold upon the composite part is of advantage to apply the pressure on the corner section of the L-shaped laminate. Moreover, the mechanical properties and the thickness of the shear layer have a significant influence on the modeling of the consolidation process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Ridgard, C.: Accuracy and distortion of composite parts and tools: causes and solutions. SME Tech Paper, Tooling for Composites’93, 93–113 (1993)
2. Johnston, A., Vaziri, R., Poursartip, A.: A plane strain model for process-induced deformation of laminated composite structures. J. Compos. Mater. 35, 1435–1469 (2001)10.1106/YXEA-5MH9-76J5-BACK ↗
3. Fernlund, G., Rahman, N., Courdji, R., Bresslauer, M., Poursartip, A., Willden, K., Nelson, K.: Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimentional fidelity of autoclave-processd composite parts. Compos. Part A 33, 341–351 (2002)10.1016/S1359-835X(01)00123-3 ↗
4. Twigg, G., Poursatip, A., Ferlund, G.: Tool-part interaction in composite processing. Part I: experimental investigation and analytical model. Compos. Part A 35, 121–133 (2004)10.1016/S1359-835X(03)00131-3 ↗
5. Twigg, G., Poursatip, A., Ferlund, G.: Tool-part interaction in composite processing. Part II: numerical modeling. Compos Part A 35, 135–141 (2004)10.1016/S1359-835X(03)00132-5 ↗
6. Ersoy, N., Potter, K., Wisnom, M.R., Clegg, M.J.: An experimental method to study the frictional processes during composites manufacturing. Compos. Part A 36, 1536–1544 (2005)10.1016/j.compositesa.2005.02.010 ↗
7. Khoun, L., Hubert, P.: Investigation of the dimensional stability of carbon epoxy cylinders manufactured by resin transfer moulding. Compos. Part A 41, 116–124 (2010)10.1016/j.compositesa.2009.06.014 ↗
8. Kaushik, V., Raghavan, J.: Experimental study of tool-part interaction during autoclave processing of thermoset polymer composite structures. Compos. Part A 41, 1210–1218 (2010)10.1016/j.compositesa.2010.05.003 ↗
9. Zeng, X., Raghavan, J.: Role of tool-part interaction in process-induced warpage of autoclave-manufactured composite structures. Compos. Part A 41, 1174–1183 (2010)10.1016/j.compositesa.2010.04.017 ↗
10. Young, W.: Compacting pressure and cure cycle for processing of thick composite laminates. Compos. Sci. Tech. 54, 299–306 (1995)10.1016/0266-3538(95)00067-4 ↗
11. Costa, V.A.F., Sousa, A.C.M.: Modeling of flow and thermo-kinetics during the cure of thick laminated composites. Int. J. Therm. Sci. 42, 15–22 (2003)10.1016/S1290-0729(02)00003-0 ↗
12. Hubert, P., Reza, V., Poursartip, A.: A two-dimensional flow model for the process simulation of complex shape composite laminates. Int. J. Numer. Meth. Eng. 44, 1–26 (1999)10.1002/(SICI)1097-0207(19990110)44:1<1::AID-NME481>3.0.CO;2-K ↗
13. Hubert, P., Poursartip, A.: A review of flow and compaction modeling relevant to thermal matrix laminate processing. J Reinforc Plast Compos 17, 286–318 (1998)10.1177/073168449801700402 ↗
14. Hubert, P., Poursartip, A.: Aspects of the compaction of composite angle laminates: an experimental investigation. J Compos Mater 35, 2–26 (2001)10.1177/002199801772661849 ↗
15. Li, M., Tucker, C.L.: Modeling and simulation of two-dimensional consolidation for thermoset matrix composites. Compos. Part A 33, 877–892 (2002)10.1016/S1359-835X(02)00017-9 ↗
16. Li, M., Li, Y.X., Zhang, Z.G., Gu, Y.Z.: Numerical simulation of two-dimensional flow and compaction during the consolidation of laminated composites. Polym. Compos. 29, 560–568 (2008)10.1002/pc.20444 ↗
17. Li, Y. X.: Numerical simulation and processing analysis of resin flow and fiber bed compaction of advanced composites. PhD Thesis, Beihang University; (2008)
18. Xin, C.B., Gu, Y.Z., Li, M., Luo, J., Li, Y.X., Zhang, Z.G.: Experimental and numerical study on the effect of rubber mold configuration on the compaction of composite angle laminates during autoclave processing. Composites Part A (Print)
19. Gu, Y.Z., Li, M., Li, Y.X., Zhang, Z.G.: Pressure transfer behaviour of rubber mould and the effects on consolidation of L-shape composite laminates. Polym. Polym. Compos. 18, 167–174 (2010)
20. Gu, Y.Z., Li, M., Zhang, Z.G., Sun, Z.J.: Void formation model and measuring method of void formation condition during hot pressing process. Polym. Compos. 31, 1562–1571 (2010)10.1002/pc.20944 ↗