In-Situ Monitoring of Damage Evolution in Glass Matrix Composites during Cyclic Loading using Nondestructive Techniques
Source abstract
Abstract
Infrared thermography is a powerful non-destructive testing technique which can be used for the detection of damage in advanced materials such as ceramic matrix composites. The purpose of this study is to apply a non-destructive methodology for analyzing, in real-time, the thermal effects in ceramic matrix composites caused by cyclic loading. Mechanical stresses induced by cyclic loading cause heat release in the composite due to failure of the interface, which results in increasing the material’s temperature. The heat waves, generated by the thermo-mechanical coupling, and the intrinsic energy dissipated during mechanical cyclic loading of the specimen, were detected by an infrared camera. The results were correlated with acoustic emission events that occurred during the damage accumulation process of the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Fire effects on concrete materials · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Evans, A.G.: The mechanical performance of fiber-reinforced ceramic matrix composites. Mater Sci Eng, A 107, 227–239 (1989). doi: 10.1016/0921-5093(89)90391-210.1016/0921-5093(89)90391-2 ↗
2. Dassios, K.G.: Energy dissipation in ceramic matrix composites: direct measurement and phenomenological assessment. J Eng Technol 1(3), 44–56 (2011)
3. Brennan JJ, C.K., Taylor M.P.: High strength thermally stable magnesium aluminosilicate glass ceramic matrix SiC fibre composite
4. Johnson, L.F., Hasselman, D.P.H., Chyung, K.: Effect of silicon-carbide fiber or whisker reinforcement on the thermal-diffusivity conductivity of an osumilite glass-ceramic. J Am Ceram Soc 70(6), C135–C138 (1987)10.1111/j.1151-2916.1987.tb05671.x ↗
5. Yilmaz, R., Taylor, R.: Effect of heat treatment in air on the thermal properties of SiC fibre-reinforced composite. Part 1: a barium osumilite (BMAS) matrix glass ceramic composite. J Mater Sci 42(3), 763–771 (2007). doi: 10.1007/s10853-006-1443-310.1007/s10853-006-1443-3 ↗
6. Choy, K.L., Duplock, P., Rogers, P.S., Churchman-Davies, J., Pirzada, M.T.: The mechanical behaviour of glass and glass-ceramic matrix composites. Mat Sci Eng a-Struct 278(1–2), 187–194 (2000)10.1016/S0921-5093(99)00572-9 ↗
7. Brennan, J.J., Prewo, K.M.: Silicon carbide fibre reinforced glass-ceramic matrix composites exhibiting high strength and toughness. J Mater Sci 17(8), 2371–2383 (1982). doi: 10.1007/bf0054374710.1007/BF00543747 ↗
8. Bates, D., Smith, G., Lu, D., Hewitt, J.: Rapid thermal non-destructive testing of aircraft components. Compos Part B: Eng 31(3), 175–185 (2000). doi: 10.1016/s1359-8368(00)00005-610.1016/S1359-8368(00)00005-6 ↗
9. Avdelidis, N.P., Hawtin, B.C., Almond, D.P.: Transient thermography in the assessment of defects of aircraft composites. NDT and E Int 36(6), 433–439 (2003). doi: 10.1016/s0963-8695(03)00052-510.1016/S0963-8695(03)00052-5 ↗
10. Mei, H.: Current development in non-destructive testing and damage evaluation for ceramic matrix composites. Adv Appl Ceram 108(2), 84–91 (2009). doi: 10.1179/174367608x37856910.1179/174367608X378569 ↗
11. Kordatos, E.Z., Aggelis, D.G., Matikas, T.E.: Monitoring of fatigue damage in metal plates by acoustic emission and thermography, vol. 7982. vol. 1. SPIE, (2011)10.1117/12.881021 ↗
12. Aggelis, D.G., Kordatos, E.Z., Matikas, T.E.: Acoustic emission for fatigue damage characterization in metal plates. Mech Res Commun 38(2), 106–110 (2011). doi: 10.1016/j.mechrescom.2011.01.01110.1016/j.mechrescom.2011.01.011 ↗
13. Kordatos, E.Z., Matikas, T.E.: Developing damage metrics for metallic structures undergoing fatigue using real-time thermographic evaluation, vol. 7982. vol. 1. SPIE, (2011)10.1117/12.881019 ↗
14. Aggelis, D.G., Kordatos, E.Z., Soulioti, D.V., Matikas, T.E.: Combined use of thermography and ultrasound for the characterization of subsurface cracks in concrete. Constr Build Mater 24(10), 1888 (2010)10.1016/j.conbuildmat.2010.04.014 ↗
15. Kordatos, E.Z., Aggelis, D.G., Matikas, T.E.: Monitoring mechanical damage in structural materials using complimentary NDE techniques based on thermography and acoustic emission. Composites Part B: Engineering(0). doi: 10.1016/j.compositesb.2011.12.01310.1016/j.compositesb.2011.12.013 ↗
16. Kim, J., Liaw, P.K.: Tensile Fracture Behavior of Nicalon/SiC Composites. Metall Mater Trans A 38(13), 2203–2213 (2007). doi: 10.1007/s11661-007-9306-310.1007/s11661-007-9306-3 ↗
17. Dassios, K.G., Aggelis, D.G., Kordatos, E.Z., Matikas, T.E.: Cyclic loading of a SiC-fiber reinforced ceramic matrix composite reveals damage mechanisms and thermal residual stress state. Compos Part A: Appl Sci Manuf 44, 105–113 (2013). doi: 10.1016/j.compositesa.2012.06.01110.1016/j.compositesa.2012.06.011 ↗
18. Kordatos, E.Z., Aggelis, D.G., Dassios, K.G., Lagari, P.L.I., Matikas, T.E.: Real-time characterization of damage in ceramic matrix composites using IR thermography and acoustic emission. In: Proc. SPIE 8346 “Smart Sensor Phenomena, Technology, Networks, and Systems Integration”, San Diego CA 2012, p. 83461710.1117/12.915242 ↗
19. Brémond, P., Potet, P.: Lock-in thermography: A tool to analyse and locate thermo-mechanical mechanisms in materials and structures. In: Rozlosnik, A.E., Dinwiddie, R.B. (eds.), Orlando, FL 2001. Thermosense XXIII, pp. 560-56610.1117/12.421039 ↗
20. Minh Phong, L.: Fatigue limit evaluation of metals using an infrared thermographic technique. Mech Mater 28(1–4), 155–163 (1998). doi: 10.1016/s0167-6636(97)00047-1
21. Krapez, J.C., Pacou, D., Gardette, G.: Lock-in thermography and fatigue limit of metals. Proc. QIRT’2000, 277-282 (2000)10.21611/qirt.2000.051 ↗
22. La Rosa, G., Risitano, A.: Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. Int J Fatigue 22(1), 65–73 (2000). doi: 10.1016/s0142-1123(99)00088-210.1016/S0142-1123(99)00088-2 ↗
23. Kordatos, E.Z., Strantza, M.A., Dassios, K.G., Lagari, P.L.I., Matikas, T.E.: Determination of fatigue limit in composite materials using IR lock-in thermography. In: DURACOSYS 2012, 10th International Conference on Durability of Composite Systems, Brussels (2012)
24. Muzia, G., Rdzawski, Z.M., Rojek, M., Stabik, J., Wróbel, G.: Thermographic diagnosis of fatigue degradation of epoxy-glass composites. Journal of Achievements in Materials and Manufacturing Engineering 24(2) (2007)
25. Risitano, A., Risitano, G.: Cumulative damage evaluation of steel using infrared thermography. Theor Appl Fract Mech 54(2), 82–90 (2010). doi: 10.1016/j.tafmec.2010.10.00210.1016/j.tafmec.2010.10.002 ↗
26. Yang, B., Liaw, P.K., Wang, G., Peter, W.H., Buchanan, R.A., Yokoyama, Y., Huang, J.Y., Kuo, R.C., Huang, J.G., Fielden, D.E., Klarstrom, D.L.: Thermal-Imaging Technologies for Detecting Damage during High-Cycle Fatigue. Metall Mater Trans A: Phys Metall Mater Sci 35 A(1), 15–23 (2004)10.1007/s11661-004-0104-x ↗
27. Ait Aouit, D., Ouahabi, A.: Monitoring crack growth using thermography. Suivi de fissuration de matériaux par thermographie 336(8), 677–683 (2008). doi: 10.1016/j.crme.2008.06.001
28. Plekhov, O., Palin-Luc, T., Saintier, N., Uvarov, S., Naimark, O.: Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography. Fatigue Fract Eng Mater Struct 28(1–2), 169–178 (2005). doi: 10.1111/j.1460-2695.2004.00837.x10.1111/j.1460-2695.2005.00856.x ↗
29. Sfarra, S., Ibarra-Castanedo, C., Bendada, A., Maldague, X., Ambrosini, D., Paoletti, D.: Comparative study for the nondestructive testing of advanced ceramic materials by infrared thermography and holographic interferometry. In, Orlando, FL 2010. Thermosense XXXII10.1117/12.850742 ↗
30. Liu, C., Cheng, L., Luan, X., Li, B., Zhou, J.: Damage evolution and real-time non-destructive evaluation of 2D carbon-fiber/SiC-matrix composites under fatigue loading. Mater Lett 62(24), 3922–3924 (2008). doi: 10.1016/j.matlet.2008.04.06310.1016/j.matlet.2008.04.063 ↗
31. Reis, P., Ferreira, J., Richardson, M.: Fatigue damage characterization by NDT in polypropylene/glass fibre composites. Appl Compos Mater 18(5), 409–419 (2011). doi: 10.1007/s10443-010-9172-910.1007/s10443-010-9172-9 ↗
32. Trojanová, Z., Száraz, Z., Chmelík, F., Lukáč, P.: Acoustic emission from deformed Mg–Y–Nd alloy and this alloy reinforced with SiC particles. J Alloys Compd 504(2), L28–L30 (2010). doi: 10.1016/j.jallcom.2010.05.13810.1016/j.jallcom.2010.05.138 ↗
33. Grosse, C., Reinhardt, H., Dahm, T.: Localization and classification of fracture types in concrete with quantitative acoustic emission measurement techniques. NDT & E Int 30(4), 223–230 (1997). doi: 10.1016/s0963-8695(96)00060-610.1016/S0963-8695(96)00060-6 ↗
34. Carpinteri, A., Lacidogna, G., Niccolini, G., Puzzi, S.: Critical defect size distributions in concrete structures detected by the acoustic emission technique. Meccanica 43(3), 349–363 (2008). doi: 10.1007/s11012-007-9101-710.1007/s11012-007-9101-7 ↗
35. Aggelis, D.G., Soulioti, D.V., Barkoula, N.M., Paipetis, A.S., Matikas, T.E.: Influence of fiber chemical coating on the acoustic emission behavior of steel fiber reinforced concrete. Cem Concr Compos 34(1), 62–67 (2012). doi: 10.1016/j.cemconcomp.2011.07.00310.1016/j.cemconcomp.2011.07.003 ↗