In-Situ Void Formation During Liquid Composite Molding for Preformed Warp, Weft, and Alternating Orientation RTM Samples

1. Atescan-Yuksek, Y., Mills, A., Ayre, D., Koziol, K., Salonitis, K.: Comparative life cycle assessment of aluminium and CFRP composites: The case of aerospace manufacturing. Int. J. Adv. Manuf. Technol. 131, 4345–4357 (2024). https://doi.org/10.1007/s00170-024-13241-310.1007/s00170-024-13241-3 ↗

2. Othman, R., Ismail, N.I., Ab, M.A., Pahmi, H., Hisyam, M., Basri, M.H., bin Sharudin, H., Hemdi, A.R.: Application of carbon fiber reinforced plastics in automotive industry: A review. J. Mech. Manuf 1, 144–154 (2018)

3. Konstantopoulos, S., Hueber, C., Antoniadis, I., Summerscales, J., Schledjewski, R.: Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: A review of challenges and solutions. Advanced Manufacturing: Polymer & Composites Science 5, 85–99 (2019). https://doi.org/10.1080/20550340.2019.163577810.1080/20550340.2019.1635778 ↗

4. Turner, J.M.: Void formation and mortality during liquid composite molding, (2023). https://scholarsarchive.byu.edu/etd/10180

5. Thompson, N.R.: Void formation during liquid composite molding under varied pressure with mechanical properties validation, (2024). https://scholarsarchive.byu.edu/etd/10512

6. Kuentzer, N., Simacek, P., Advani, S.G., Walsh, S.: Correlation of void distribution to VARTM manufacturing techniques. Composites Part A: Applied Science and Manufacturing 38, 802–813 (2007). https://doi.org/10.1016/j.compositesa.2006.08.00510.1016/j.compositesa.2006.08.005 ↗

7. Terekhov, I.V., Chistyakov, E.M.: Binders used for the manufacturing of composite materials by liquid composite molding. Polym. (Basel). 14, 87 (2022). https://doi.org/10.3390/polym1401008710.3390/polym14010087 ↗

8. Yu, H.-W., Young, W.-B.: Optimal design of process parameters for resin transfer molding. J. Compos. Mater. 31, 1113–1140 (1997). https://doi.org/10.1177/00219983970310110310.1177/002199839703101103 ↗

9. Schey, M., Beke, T., Owens, K., George, A., Pineda, E., Stapleton, S.: Effects of debulking on the fiber microstructure and void distribution in carbon fiber reinforced plastics. Compos. Part. Appl. Sci. Manuf 165, 107364 (2023). https://doi.org/10.1016/j.compositesa.2022.10736410.1016/j.compositesa.2022.107364 ↗

10. Niggemann, C., Song, Y.S., Gillespie, J.W., Heider, D.: Experimental investigation of the controlled atmospheric pressure resin infusion (CAPRI) process. J. Compos. Mater. 42, 1049–1061 (2008). https://doi.org/10.1177/002199830809065010.1177/0021998308090650 ↗

11. Chang, C.-Y.: Simulation of compression effect on filling process in compression resin transfer molding. Advanced Composite Materials 20, 197–211 (2011). https://doi.org/10.1163/092430410X54703810.1163/092430410X547038 ↗

12. Muthuvel, B., Bhattacharyya, D., Bickerton, S.: A parametric flow visualisation study on the impregnation and consolidation stages of the wet compression moulding process. Part I: Process parameters. Compos. Part. Appl. Sci. Manuf. 150, 106634 (2021). https://doi.org/10.1016/j.compositesa.2021.10663410.1016/j.compositesa.2021.106634 ↗

13. Restrepo, O., Hsiao, K.-T., Rodriguez, A., Minaie, B.: Development of adaptive injection flow rate and pressure control algorithms for resin transfer molding. Composites Part A: Applied Science and Manufacturing 38, 1547–1568 (2007). https://doi.org/10.1016/j.compositesa.2007.01.00510.1016/j.compositesa.2007.01.005 ↗

14. ISO 4410 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding: (2023)

15. Arbter, R., Beraud, J.M., Binetruy, C., Bizet, L., Bréard, J., Comas-Cardona, S., Demaria, C., Endruweit, A., Ermanni, P., Gommer, F., Hasanovic, S., Henrat, P., Klunker, F., Laine, B., Lavanchy, S., Lomov, S.V., Long, A., Michaud, V., Morren, G., Ruiz, E., Sol, H., Trochu, F., Verleye, B., Wietgrefe, M., Wu, W., Ziegmann, G.: Experimental determination of the permeability of textiles: A benchmark exercise. Composites Part A: Applied Science and Manufacturing 42, 1157–1168 (2011). https://doi.org/10.1016/j.compositesa.2011.04.02110.1016/j.compositesa.2011.04.021 ↗

16. de Almeida, S.F.M., Neto, Z., dos, S.N.: Effect of void content on the strength of composite laminates. Compos. Struct. 28, 139–148 (1994). https://doi.org/10.1016/0263-8223(94)90044-210.1016/0263-8223(94)90044-2 ↗

17. Sisodia, S.M., Bull, D.J., George, A.R., Gamstedt, E.K., Mavrogordato, M.N., Fullwood, D.T., Spearing, S.M.: The effects of voids in quasi-static indentation of resin-infused reinforced polymers. J. Compos. Mater. 53, 4399–4410 (2019). https://doi.org/10.1177/002199831985802410.1177/0021998319858024 ↗

18. Turner, J., Lippert, D., Seo, D., Grasinger, M., George, A.: Effect of wettability on the void formation during liquid infusion into fibers. Polymer Composites 45, 14931–14942 (2024). https://doi.org/10.1002/pc.2881110.1002/pc.28811 ↗

19. Mehdikhani, M., Gorbatikh, L., Verpoest, I., Lomov, S.V.: Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance. J. Compos. Mater. 53, 1579–1669 (2019). https://doi.org/10.1177/002199831877215210.1177/0021998318772152 ↗

20. Leclerc, J.S., Ruiz, E.: Porosity reduction using optimized flow velocity in resin transfer Molding. Composites Part A: Applied Science and Manufacturing 39, 1859–1868 (2008). https://doi.org/10.1016/j.compositesa.2008.09.00810.1016/j.compositesa.2008.09.008 ↗

21. Lundström, T.S., Gebart, B.R., Lundemo, C.Y.: Void formation in RTM. Journal of Reinforced Plastics and Composites 12, 1339–1349 (1993). https://doi.org/10.1177/07316844930120120710.1177/073168449301201207 ↗

22. Facciotto, S., Simacek, P., Advani, S.G., Middendorf, P.: Modeling of anisotropic dual scale flow in RTM using the finite elements method. Compos. Part. B Eng. 214, 108735 (2021). https://doi.org/10.1016/j.compositesb.2021.10873510.1016/j.compositesb.2021.108735 ↗

23. Ghose, S., Lewis, T.M., Cano, R.J., Watson, K.A., Isayev, A.I.: Infusion processing of phenylethynyl terminated imides by high temperature RTM and VARTM. In: International SAMPE Technical Conference. Society for Advancement of Materials and Process Engineering, Fort Worth (2011)

24. Mendikute, J., Baskaran, M., Aretxabaleta, L., Aurrekoetxea, J.: Effect of voids on the impact properties of non-crimp fabric carbon/epoxy laminates manufactured by liquid composite moulding. Compos. Struct. 297, 115922 (2022). https://doi.org/10.1016/j.compstruct.2022.11592210.1016/j.compstruct.2022.115922 ↗

25. Sisodia, S.M., Garcea, S.C., George, A.R., Fullwood, D.T., Spearing, S.M., Gamstedt, E.K.: High-resolution computed tomography in resin infused woven carbon fibre composites with voids. Compos. Sci. Technol. 131, 12–21 (2016). https://doi.org/10.1016/j.compscitech.2016.05.01010.1016/j.compscitech.2016.05.010 ↗

26. Bayat, S., Jamzad, A., Zobeiry, N., Poursartip, A., Mousavi, P., Abolmaesumi, P.: Temporal enhanced ultrasound: A new method for detection of porosity defects in composites. Compos. Part. Appl. Sci. Manuf 164, 107259 (2023). https://doi.org/10.1016/j.compositesa.2022.10725910.1016/j.compositesa.2022.107259 ↗

27. Torres, J.J., Simmons, M., Sket, F., González, C.: An analysis of void formation mechanisms in out-of-autoclave Prepregs by means of X-ray computed tomography. Compos. Part. Appl. Sci. Manuf. 117, 230–242 (2019). https://doi.org/10.1016/j.compositesa.2018.11.01010.1016/j.compositesa.2018.11.010 ↗

28. Galvez-Hernandez, P., Nazemi, E., Radhakrishnan, A., Alvarez-Borges, F., Mavrogordato, M., Sinclair, I., Kratz, J.: Development of a lab-based in situ XCT oven for vacuum-bag processing of Prepreg laminates. J. Compos. Mater. 59, 1035–1053 (2025). https://doi.org/10.1177/0021998324130232810.1177/00219983241302328 ↗

29. Vilà, J., Sket, F., Wilde, F., Requena, G., González, C., LLorca, J.: An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography. Compos. Sci. Technol. 119, 12–19 (2015). https://doi.org/10.1016/j.compscitech.2015.09.01610.1016/j.compscitech.2015.09.016 ↗

30. Castro, J., Sket, F., Helfen, L., González, C.: In situ local imaging and analysis of impregnation during liquid moulding of composite materials using synchrotron radiation computed laminography. Compos. Sci. Technol. 215, 108999 (2021). https://doi.org/10.1016/j.compscitech.2021.10899910.1016/j.compscitech.2021.108999 ↗

31. Lystrup, C., George, A., Zobell, B., Boster, K., Childs, C., Girod, H., Fullwood, D.: Optical measurement of voids in situ during infusion of carbon reinforcements. J. Compos. Mater. 55, 775–786 (2021). https://doi.org/10.1177/002199832095982010.1177/0021998320959820 ↗

32. Garrett, T.: In-situ RTM videos, (2025). https://scholarsarchive.byu.edu/data/79

33. Zdziennicka, A., Szymczyk, K., Jańczuk, B., Longwic, R., Sander, P.: Adhesion of Canola and diesel oils to some parts of diesel engine in the light of surface tension components and parameters of these substrates. Int. J. Adhes. Adhes 60, 23–30 (2015). https://doi.org/10.1016/j.ijadhadh.2015.03.00110.1016/j.ijadhadh.2015.03.001 ↗

34. Tan, H., Roy, T., Pillai, K.M.: Variations in unsaturated flow with flow direction in resin transfer molding: An experimental investigation. Composites Part A: Applied Science and Manufacturing 38, 1872–1892 (2007). https://doi.org/10.1016/j.compositesa.2007.04.00210.1016/j.compositesa.2007.04.002 ↗