Viscoelastic Assessment of Fibre-Reinforced Sandwich Structures in Marine Environment
Source abstract
Abstract
Abstract This study investigates the viscoelastic behaviour of fibre-reinforced composite sandwich structures (FRPSSs) for marine applications, with an emphasis on the impact of seawater exposure on their damping properties. FRPSSs composed of E glass-fibre/epoxy facesheets and various PVC foam core configurations were evaluated using tensile and dynamic mechanical analysis tests. Moisture uptake during seawater exposure was tracked using gravimetric methods. All samples followed Fickian moisture absorption patterns, which led to reductions in load-bearing capacity, with tensile strength and elastic modulus declining by 35.4% and 8.4%, respectively. Type B specimens showed a 38% greater reduction in storage modulus compared to Type A, while Tan δ increased by 10% for Type A and 5.7% for Type B, indicating higher strain energy dissipation. Type A specimens exhibited superior stiffness and energy dissipation post-exposure. The higher Tan δ indicated greater strain-energy dissipation and a transition toward more viscous behaviour, implying accelerated degradation over time. Prony-series parameters were extracted to support the development of numerical viscoelastic models for optimizing FRPSS designs, enhancing their resistance to out-of-plane damage in marine environments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Analysis and Optimization · Mechanical Behavior of Composites · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. He, B., Zheng, X., Yang, Q., Zou, Y., Wu, K., Liu, Z. et al.: Damage resistance of honeycomb sandwich composites under low-energy impact. Appl Composit Mater (2024). https://doi.org/10.1007/s10443-024-10278-110.1007/s10443-024-10278-1 ↗
2. Kirar, E., Demircan, G., Kisa, M., Ozen, M.: Deformation rate effect on compression behaviour of glass fiber-epoxy composites under seawater aging. Appl Composit Mater (2024). https://doi.org/10.1007/s10443-024-10284-310.1007/s10443-024-10284-3 ↗
3. Zhou, J., Wang, J., Su, M., Zhou, W.: Acoustic emission monitoring and damage failure behavior of seawater-aged composites under the bending load. Appl. Compos. Mater. 30, 1393–1413 (2023). https://doi.org/10.1007/s10443-023-10126-810.1007/s10443-023-10126-8 ↗
4. Seo, H., Jang, H., Lee, I.: Experimental investigation of salt fog effect on the CFRP laminates. Adv. Compos. Mater 26, 321–334 (2017). https://doi.org/10.1080/09243046.2016.118782210.1080/09243046.2016.1187822 ↗
5. Siriruk, A., Penumadu, D., Jack, W.Y.: Effect of sea environment on interfacial delamination behavior of polymeric sandwich structures. Compos. Sci. Technol. 69, 821–828 (2009). https://doi.org/10.1016/j.compscitech.2008.02.03310.1016/j.compscitech.2008.02.033 ↗
6. Li, R., Xia, H., Xu, Z., Ni, Q.Q., Fu, Y.: U-DMA measurement and dynamic analysis of ultrasonic wave propagation in particulate composites. Compos. Sci. Technol. 151, 174–183 (2017). https://doi.org/10.1016/j.compscitech.2017.08.02210.1016/j.compscitech.2017.08.022 ↗
7. Islam, M.N., Baxevanakis, K.P., Silberschmidt, V.V.: Viscoelastic characterisation of additively manufactured composites with nylon matrix: Effects of type and orientation of fibres. Compos. B Eng. 263, 110815 (2023). https://doi.org/10.1016/j.compositesb.2023.11081510.1016/j.compositesb.2023.110815 ↗
8. Dubey, D., Chowdhury, S., Khatkar, V., Singh, S.P., Behera, B.K.: Dynamic mechanical analysis of additively manufactured continuous Kevlar fiber-reinforced nylon composites across variable fiber orientations. Mater Lett 379, 137704 (2025). https://doi.org/10.1016/j.matlet.2024.13770410.1016/j.matlet.2024.137704 ↗
9. Mamallan, S., Narayanan, V., Ragothaman, C. B.: Quasi-static and low-frequency dynamic mechanical analysis characterization of graphene Nanoplatelets/Glass Fabric/Bisphenol-A-based epoxy nanocomposites. J Polym Mater 0, 1–10 (2024). https://doi.org/10.32604/jpm.2024.056744.10.32604/jpm.2024.056744 ↗
10. Billah, K.M.M., Lorenzana, F.A.R., Martinez, N.L., Wicker, R.B., Espalin, D.: Thermomechanical characterization of short carbon fiber and short glass fiber-reinforced ABS used in large format additive manufacturing. Addit. Manuf. 35, 101299 (2020). https://doi.org/10.1016/j.addma.2020.10129910.1016/j.addma.2020.101299 ↗
11. Khurana, I., Pratap, C., Singh, S., Bansal, A., Butola, R.: Experimental analysis of different GSM of glass fibre using dynamic mechanical analysis. Mater Today Proc 25(946), 51 (2020). https://doi.org/10.1016/j.matpr.2020.04.332ElsevierLtd10.1016/j.matpr.2020.04.332ElsevierLtd ↗
12. Hu, J., Chen, W., Fan, P., Gao, J., Fang, G., Cao, Z., et al.: Epoxy shape memory polymer (SMP): Material preparation, uniaxial tensile tests and dynamic mechanical analysis. Polym. Test. 62, 335–341 (2017). https://doi.org/10.1016/j.polymertesting.2017.07.00110.1016/j.polymertesting.2017.07.001 ↗
13. Menard, K.P., Menard, N.R.: Dynamic mechanical analysis. CRC Press (2020). https://doi.org/10.1201/978042919030810.1201/9780429190308 ↗
14. Murugan, R., Ramesh, R., Padmanabhan, K.: Investigation on static and dynamic mechanical properties of epoxy based woven fabric glass/carbon hybrid composite laminates. Procedia Eng, vol. 97, p. 459–68. Elsevier Ltd (2014). https://doi.org/10.1016/j.proeng.2014.12.27010.1016/j.proeng.2014.12.270 ↗
15. Osa-uwagboe, N., Silberschmidt, V.V., Baxevanakis, K.P., Demirci, E.: Effects of moisture absorption on penetration performance of FRP sandwich structures. Compos Struct 344, 118319 (2024). https://doi.org/10.1016/j.compstruct.2024.11831910.1016/j.compstruct.2024.118319 ↗
16. Osa-Uwagboe, N., Silberschimdt, V.V., Demirci, E.: Seawater effect on energy-absorption properties of polymer-based composite sandwich structures. Procedia Structural Integrity, vol. 54, p. 44–51. Elsevier B.V. (2024). https://doi.org/10.1016/j.prostr.2024.01.05410.1016/j.prostr.2024.01.054 ↗
17. Osa-uwagboe, N., Silberschmidt, V.V., Demirci, E.: Dynamic bending behaviour of sandwich structures for marine applications. Appl. Sci. 14(13), 11110 (2024). https://doi.org/10.3390/app14231111010.3390/app142311110 ↗
18. ASTM International. Standard Practice for Modified Salt Spray (Fog) Testing 1. Annual Book of ASTM Standards (2019). https://doi.org/10.1520/G0085-1910.1520/G0085-19 ↗
19. Osa-uwagboe, N., Udu, A.G., Silberschmidt, V.V., Baxevanakis, K.P., Demirci, E.: Effects of seawater on mechanical performance of composite sandwich structures: A machine learning framework. Materials 17, 2549 (2024). https://doi.org/10.3390/ma1711254910.3390/ma17112549 ↗
20. Gao, C., Zhou, C.: Moisture absorption and cyclic absorption–desorption characters of fibre-reinforced epoxy composites. J. Mater. Sci. 54, 8289–8301 (2019). https://doi.org/10.1007/s10853-019-03399-710.1007/s10853-019-03399-7 ↗
21. Meyers, M.A., Chawla, K.K.: Mechanical behavior of materials. Cambridge University Press (2008). https://doi.org/10.1017/CBO978051181094710.1017/CBO9780511810947 ↗
22. Jalocha, D., Constantinescu, A., Neviere, R.: Revisiting the identification of generalized Maxwell models from experimental results. Int. J. Solids Struct. 67–68, 169–181 (2015). https://doi.org/10.1016/j.ijsolstr.2015.04.01810.1016/j.ijsolstr.2015.04.018 ↗
23. ASTM International: Test method for plastics: dynamic mechanical properties: In Flexure (Three-Point Bending) (2015). https://doi.org/10.1520/D5023-15.10.1520/D5023-15 ↗
24. Chowdhury, I.R., Rao, P.S., O’Dowd, N.P., Comer, A.J.: Hygrothermal ageing effects on failure behaviour of fibre-reinforced polymer composite materials under in-situ SEM testing. Compos B Eng 294, 112148 (2025). https://doi.org/10.1016/j.compositesb.2025.11214810.1016/j.compositesb.2025.112148 ↗
25. Ellyin, F., Rohrbacher, C.: Effect of aqueous environment and temperature on glass fibre epoxy resin composites. J. Reinf. Plast. Compos. 19, 1405–1427 (2000)10.1177/073168400772678518 ↗
26. Nayak, R.K., Mahato, K.K., Ray, B.C.: Water absorption behavior, mechanical and thermal properties of nano TiO2 enhanced glass fiber reinforced polymer composites. Compos A Appl Sci Manuf 90, 736–747 (2016). https://doi.org/10.1016/j.compositesa.2016.09.00310.1016/j.compositesa.2016.09.003 ↗
27. Kane, S.N., Mishra, A., Dutta, A.K.: Effects of hydrothermal immersion and hydrothermal conditioning of mechanical properties of GRE composite. J Phys Conf Ser 755, 011001 (2016). https://doi.org/10.1088/1742-6596/755/1/01100110.1088/1742-6596/755/1/011001 ↗
28. El-Hassan, H., El Maaddawy, T., Šišková, A.: Microstructure characteristics of GFRP reinforcing bars in harsh environment. Adv Mater Sci Eng 2019, 1–19 (2019). https://doi.org/10.1155/2019/805384310.1155/2019/8053843 ↗
29. El-Hassan, H., El-Maaddawy, T., Al-Sallamin, A., Al-Saidy, A.: Performance evaluation and microstructural characterization of GFRP bars in seawater-contaminated concrete. Constr. Build. Mater. 147, 66–78 (2017). https://doi.org/10.1016/j.conbuildmat.2017.04.13510.1016/j.conbuildmat.2017.04.135 ↗
30. Osa-uwagboe, N., Udu, A.G., Silberschmidt, V.V., Baxevanakis, K.P., Demirci, E.: Damage assessment of glass-fibre-reinforced plastic structures under quasi-static indentation with acoustic emission. Materials 16, 5036 (2023). https://doi.org/10.3390/ma1614503610.3390/ma16145036 ↗
31. Ward, I.M., Sweeney, J., Sweeney, W.: Mechanical Properties of Solid Polymers, 3rd edn. John Wiley & Sons (2013)
32. Etaati, A., Mehdizadeh, S.A., Wang, H., Pather, S.: Vibration damping characteristics of short hemp fibre thermoplastic composites. J. Reinf. Plast. Compos. 33, 330–341 (2014). https://doi.org/10.1177/073168441351222810.1177/0731684413512228 ↗
33. Xu, X., Sanei, S.H.R., Steinmetz, E., Gohn, A., Williams, J.: Effect of microstructure uncertainty and testing frequency on storage and loss moduli of injection molded MWCNT reinforced polyamide 66 nanocomposites. Polym Test 85, 106455 (2020). https://doi.org/10.1016/j.polymertesting.2020.10645510.1016/j.polymertesting.2020.106455 ↗
34. Jiang, Z., Wang, F., Yin, J., Gong, S., Dai, Z., Pang, Y., et al.: Vibration damping mechanism of CuAlMn/polymer/carbon nanomaterials multi-scale composites. Compos B Eng 199, 108266 (2020). https://doi.org/10.1016/j.compositesb.2020.10826610.1016/j.compositesb.2020.108266 ↗
35. Bazaraa, M.S., Sherali, H.D., Shetty, C.M.: Nonlinear Programming. Wiley (2006). https://doi.org/10.1002/047178777910.1002/0471787779 ↗
36. Nocelda, J., Wright, J.S.: Numerical Optimization, 2nd edn. Springer New York (2006). https://doi.org/10.1007/978-0-387-40065-510.1007/978-0-387-40065-5 ↗
37. Boyd, S., Vandenberghe, L.: Convex optimization. Cambridge University Press (2004). https://doi.org/10.1017/CBO978051180444110.1017/CBO9780511804441 ↗