Investigation of the Impact of Thermo-Stamping, Fiber Orientation, and Metal Thickness on the Formability of Fiber Metal Laminates
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Alderliesten, R.: Fatigue and fracture of fibre metal laminates. Cham, Switzerland, Vol. 236 Springer (2017). https://doi.org/10.1007/978-3-319-56227-810.1007/978-3-319-56227-8 ↗
2. Vlot, A., Gunnink, J.W.: Fibre Metal Laminates: An Introduction. Springer Science & Business Media. Delft, Netherlands (2011)
3. Sherkatghanad, E., Lang, L., Blala, H., Li, L., Alexandrov, S.: Fiber Metal Laminate Structure, a good replacement for monolithic and composite materials. in IOP Conference Series: Materials Science and Engineering IOP Publishing. (2019). https://doi.org/10.1088/1757-899X/576/1/01203410.1088/1757-899X/576/1/012034 ↗
4. Jiang, S., Gao, L., Xie, B., Li, K., Wu, C.: Open-Hole Tensile Behavior and Progressive damage of Hybrid Fiber Metal laminates. Appl. Compos. Mater. 29, 547–563 (2022). https://doi.org/10.1007/s10443-021-09981-010.1007/s10443-021-09981-0 ↗
5. Etri, H.E., Korkmazet, M.E., Gupta, M.K., Gunay, M., Xu, L.: A state-of-the-art review on mechanical characteristics of different fiber metal laminates for aerospace and structural applications. Int. J. Adv. Manuf. Technol. 123(9), 2965–2991 (2022). https://doi.org/10.1007/s00170-022-10277-110.1007/s00170-022-10277-1 ↗
6. Ankush, P.S., Sanan, H.K., Rajesh, K., Venkitanarayanan, P.: Effect of through thickness metal layer distribution on the low velocity impact response of fiber metal laminates. Polym. Test. 65, 301–312 (2018). https://doi.org/10.1016/j.polymertesting.2017.12.00110.1016/j.polymertesting.2017.12.001 ↗
7. Yue, B., Xu, Y., Zhang, W.A.: Novel topology optimization of the Frame Mold for Composite Autoclave process. Appl. Compos. Mater. 29, 2343–2365 (2022). https://doi.org/10.1007/s10443-022-10068-710.1007/s10443-022-10068-7 ↗
8. Jakubczak, P.A., Bienias, J., Mania, R., Majerski: Forming of thin-walled profiles made of FML in autoclave process. Aircr. Eng. Aerosp. Technol. 90(3), 506–514 (2018). https://doi.org/10.1108/AEAT-01-2016-001610.1108/AEAT-01-2016-0016 ↗
9. Gisario, A.: Laser forming of glass laminate aluminium reinforced epoxy (GLARE): On the role of mechanical, physical and chemical interactions in the multi-layers material. Opt. Lasers Eng. 110, 364–376 (2018). https://doi.org/10.1016/j.optlaseng.2018.06.01310.1016/j.optlaseng.2018.06.013 ↗
10. Trzepieciński, T., Najm, S.M., Pepelnjak, T., Bensaid, K., Szpunar, M.: Incremental sheet forming of metal-based composites used in aviation and automotive applications. J. Compos. Sci. 6(10), 295 (2022). https://doi.org/10.3390/jcs610029510.3390/jcs6100295 ↗
11. Li, H., Wang, H., Alderliesten, R., Xiang, J., Lin, Y., Xu, Y., et al.: The residual stress characteristics and mechanical behavior of shot peened fiber metal laminates based on the aluminium-lithium alloy. Compos. Struct. 254, 112858 (2020). https://doi.org/10.1016/j.compstruct.2020.11285810.1016/j.compstruct.2020.112858 ↗
12. Li, L., Lang, L., Blala, H., Alexandrov, S., Li, S.: The influence of different compositions of fiber metal laminates on the fracture in the semi-solidified stamping forming. Int. J. Damage Mech. 31(8), 1254–1270 (2022). https://doi.org/10.1177/105678952095447510.1177/1056789520954475 ↗
13. Ding, Z., Wang, H., Luo, J., Li, N.: A review on forming technologies of fibre metal laminates. Int. J. Lightweight Mater. Manuf. 4(1), 110–126 (2021). https://doi.org/10.1016/j.ijlmm.2020.06.00610.1016/j.ijlmm.2020.06.006 ↗
14. Kruse, M., Ben Khalifa, N.: Influencing Parameters in the Deep Drawing of Fiber Metal Laminates with Low Viscous Matrix. in International Conference on the Technology of Plasticity. Springer (2023). https://doi.org/10.1007/978-3-031-40920-2_1410.1007/978-3-031-40920-2_14 ↗
15. Heggemann, T., Sapli, H.: Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates. in Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Springer (2021). https://doi.org/10.1007/978-3-030-75381-8_21910.1007/978-3-030-75381-8_219 ↗
16. Li, L., Lang, L., Blala, H., Alexandrov, S.: Formability Analysis of Fiber Metal Laminates with different core and skin layers by stamping process. In materials Science Forum. Trans Tech Publ.( (2020). https://doi.org/10.4028/www.scientific.net/MSF.982.8510.4028/www.scientific.net/MSF.982.85 ↗
17. Wang, X., Jiang, X., Wang, H., et al.: Manifold learning-assisted uncertainty quantification of system parameters in the fiber metal laminates hot forming process. J. Intell. Manuf. (2024). https://doi.org/10.1007/s10845-024-02343-010.1007/s10845-024-02343-0 ↗
18. Sanan, H.K., Ankush, P.S., Rajesh, K., Venkitanarayanan, P.: Effect of metal layer placement on the damage and energy absorption mechanisms in aluminium/glass fibre laminates. Int. J. Imp Eng. 119, 14–25 (2018). https://doi.org/10.1016/j.ijimpeng.2018.04.01110.1016/j.ijimpeng.2018.04.011 ↗
19. Zhang, Q., Sun, F., Ma, Y., Sun, Z.: The experimental study on the Mechanical properties of Fiber-Reinforced Metal laminates using an innovative heat-solid Integrated Forming Technology. Metals. 13, 1199 (2023). https://doi.org/10.3390/met1307119910.3390/met13071199 ↗
20. Bigot, N., Guzman-Maldonado, E., Boutaous, M., et al.: A coupled Thermo-mechanical Modelling Strategy based on alternating Direction Implicit Formulation for the Simulation of Multilayered CFRTP Thermo-stamping process. Appl. Compos. Mater. 29, 2321–2341 (2022). https://doi.org/10.1007/s10443-022-10064-x10.1007/s10443-022-10064-x ↗
21. Mosse, L., Compston, P., Cantwell, W.J., Cardew-Hall, M., Kalyanasundaram, S.: The effect of process temperature on the formability of polypropylene based fibre–metal laminates. Compos. Part A: Appl. Sci. Manufac. 36(8), 1158–1166 (2005). https://doi.org/10.1016/j.compositesa.2005.01.00910.1016/j.compositesa.2005.01.009 ↗
22. Weiss, M., Dingle, M.E., Rolfe, B.F., Hodgson, P.D.: The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming (2007). https://doi.org/10.1115/1.277232910.1115/1.2772329 ↗
23. Dou, X., Malingam, S.D., Nam, J., Kalyanasundaram, D.: Finite element modeling of stamp forming process on thermoplastic-based fiber metal laminates at elevated temperatures. World J. Eng. Technol. 3(3), 253–258 (2015). https://doi.org/10.4236/wjet.2015.33C03710.4236/wjet.2015.33C037 ↗
24. Zal, V., Naeini, H.M., Bahramian, A.R., Sinke, J.: Investigation of the effect of temperature and layup on the press forming of polyvinyl chloride-based composite laminates and fiber metal laminates. Int. J. Adv. Manuf. Technol. 89, 207–217 (2017). https://doi.org/10.1007/s00170-016-9075-510.1007/s00170-016-9075-5 ↗
25. Nestler, D., et al.: Continuous film stacking and thermoforming process for hybrid CFRP/aluminum laminates. Procedia Cirp. 66, 107–112 (2017). https://doi.org/10.1016/j.procir.2017.03.22110.1016/j.procir.2017.03.221 ↗
26. Wollmann, T., Hahn, M., Wiedemann, S., Zeiser, A., Jaschinski, J., et al.: Thermoplastic fibre metal laminates: Stiffness properties and forming behaviour by means of deep drawing. Archives Civil Mech. Eng. 18(2), 442–450 (2018). https://doi.org/10.1016/j.acme.2017.09.00110.1016/j.acme.2017.09.001 ↗
27. Wang, J., Li, J., Fu, C., Zhang, G., Zhu, W., Li, X., Yanagimoto, J.: Study on influencing factors of bending springback for metal fiber laminates. Compos. Struct. 261, 113558 (2021). https://doi.org/10.1016/j.compstruct.2021.11355810.1016/j.compstruct.2021.113558 ↗
28. Harhash, M., Fischer, T., Grubenmann, M., Hua, W., Heingärtner, J., et al.: Top-hat crashboxes of thermoplastic fibre-metal-laminates processed in one-step thermoforming: Experimental and numerical study. Compos. Part. B: Eng. 226, 109367 (2021). https://doi.org/10.1016/j.compositesb.2021.10936710.1016/j.compositesb.2021.109367 ↗
29. Lu, Y., Li, Y., Zhang, Y., Dong, L.: Manufacture of Al/CF/PEEK curved beams by hot stamping forming process. Mater. Manuf. Processes. 37(14), 1597–1609 (2022). https://doi.org/10.1080/10426914.2022.203214010.1080/10426914.2022.2032140 ↗
30. Harhash, M., Hua, W., Ziegmann, G., Palkowski, H.: Warm forming of thermoplastic fibre metal laminates. Mater. Res. Proc. 25, 439–446 (2023). https://doi.org/10.21741/9781644902417-5410.21741/9781644902417-54 ↗
31. Khalid, M., Al Rashid, A., Sheikh, M.: Effect of anodizing process on inter laminar shear strength of GLARE composite through T-peel test: Experimental and numerical approach. Exp. Tech. 45(2), 227–235 (2021). https://doi.org/10.1007/s40799-020-00433-110.1007/s40799-020-00433-1 ↗
32. Li, L., Lang, L., Hamza, B., et al.: Effect of hydroforming process on the formability of fiber metal laminates using semi-cured preparation. Int. J. Adv. Manuf. Technol. 107, 3909–3920 (2020). https://doi.org/10.1007/s00170-020-05281-210.1007/s00170-020-05281-2 ↗
33. Zhang, M., Mirza, H.A., Zhang, Y.C., Tabasum, M.N., Lang, H., Zou, P.Z.: Investigation into a comprehensive forming limit curve considering multi-parameters effects for semi-cured FMLs through uniform pressure loading test. Int. J. Damage Mech. 32(2), 289–317 (2023). https://doi.org/10.1177/1056789522113505410.1177/10567895221135054 ↗
34. Tabasum, M.N., Lang, L., Mirza, H.H., Meng, Z., Blala, H.: Numerical and experimental investigations on the effects of variable cavity pressure on the formability of GLARE using hydromechanical deep drawing. Int. J. Adv. Manuf. Technol. 119(9), 6091–6101 (2022). https://doi.org/10.1007/s00170-021-08518-w10.1007/s00170-021-08518-w ↗
35. Mirza, H.A., Lang, L., Tabasum, M.N., Meng, Z., Alexandrov, S., Jiang, J.: An investigation into the Forming of Fiber Metal laminates with different thickness metal skins using Hydromechanical Deep drawing. Appl. Compos. Mater. 29, 1349–1365 (2022). https://doi.org/10.1007/s10443-022-10024-510.1007/s10443-022-10024-5 ↗
36. Johnson, G.R.: A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. in Proceedings of the 7th International Symposium on Ballistics, The Hague, Netherlands, (1983)
37. Hashin, Z., Rotem, A.: A fatigue failure criterion for fiber reinforced materials. J. Compos. Mater. 7(4), 448–464 (1973). https://doi.org/10.1177/00219983730070040410.1177/002199837300700404 ↗
38. Hashin, Z.: Fatigue failure criteria for unidirectional fiber composites. J. Appl. Mech. 47(4), 329–334 (1980). https://doi.org/10.1115/1.315774410.1115/1.3157744 ↗
39. Xiao, H., Sultan, M.T.H., Shahar, F.S., Gaff, M., Hui, D.: Recent developments in the mechanical properties of hybrid fiber metal laminates in the automotive industry: A review. Reviews Adv. Mater. Sci. 62(1), 20220328 (2023). https://doi.org/10.1515/rams-2022-032810.1515/rams-2022-0328 ↗