Prediction of In-Plane Shear Properties of a Composite with Debonded Interface

An analytical approach is established to analyze the mechanical behavior of a unidirectional (UD) composite subjected to an in-plane shear. The effects of the interface debonding on the in-plane shear strength and plasticity of the composite are evaluated respectively. The volume-averaged internal stresses of the fiber and matrix are calculated through Bridging Model. Owing to the stress fluctuation in the matrix caused by other phases (such as the imbedded fiber and interface crack), the homogenized matrix stresses must be converted into true values based on a stress concentration factor (SCF). A new in-plane shear SCF of a composite with debonded interface is derived and applied to the predictions of strain and strength in this paper. Moreover, the contribution of the relative slippage between fiber and matrix to the non-linear shear deformation of the composite is analyzed. Finally, the efficiency and accuracy of our theory are verified with a series of examples. The approach is very efficient because the calculation can be achieved with explicit expressions mainly based on the constituent material properties. The comparisons between predicted strength and deformation with the experimental results show that our analytical approach can give out reliable underlying data for multi-scale analysis. Moreover, this theoretical method can tell if and how much the interface of a composite needs to be modified for a given load environment.