Modal Analysis of 3D Multi-axial Hybrid Composite with Experimental and Numerical Methods
Source abstract
Abstract
This work proposed a homogenized method to predict the modal properties of the three dimensional multi-axial hybrid composite. The multi-scale calculation process was characterized with a representative unit cell to derive the elastic parameters of the composite. Then the modal behaviors (natural frequency and modal shape) of the composite were simulated through the finite element method (FEM). The experimental modal analysis of key vibration parameters was conducted using a modal hammer with an acceleration sensor to verify the efficiency of the numerical results. The result shows that the maximum relative errors between experimental and FEM values of natural frequency are about 13%. Therefore, the numerical-experiment method could be used to predict the modal behavior of three dimensional multi-axial hybrids composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Acoustic Wave Phenomena Research · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Aggogeri, F., Borboni, A., Merlo, A., Pellegrini, N., Ricatto, R.: Vibration damping analysis of lightweight structures in mMachine tools. Materials (Basel) 10, 1–3 (2017)10.3390/ma10030297 ↗
2. Yang, J.-S., Ma, L., Schröder, K.-U., Chen, Y.-L., Li, S., Wu, L.-Z., Schmidt, R.: Experimental and numerical study on the modal characteristics of hybrid carbon fiber composite foam filled corrugated sandwich cylindrical panels. Polym. Test. 68, 8–18 (2018)10.1016/j.polymertesting.2018.03.040 ↗
3. Zhang, L., Pei, L., Li, H., Zhu, F.: Design and fabrication of pyrolytic carbon-SiC-fluoridated hydroxyapatite-hydroxyapatite multilayered coating on carbon fibers. Appl. Surf. Sci. 473, 571–577 (2019)10.1016/j.apsusc.2018.12.181 ↗
4. Lu, L.L., Fan, W., Meng, X., Liu, T., Han, L., Zhang, T., Dong, J., Yuan, L., Tian, H.: Modal analysis of 3D needled waste cotton fiber/epoxy composites with experimental and numerical methods. Text. Res. J. 91, 358–372 (2020)10.1177/0040517520944477 ↗
5. Prodromou, A.G., Lomov, S.V., Verpoest, I.: The method of cells and the mechanical properties of textile composites. Compos. Struct. 93, 1290–1299 (2011)10.1016/j.compstruct.2010.09.022 ↗
6. Yang, X., Fan, W., Ge, S., Gao, X., Wang, S., Zhang, Y., Foong, S.Y., Liew, R.K., Lam, S.S., Xia, C.: Advanced textile technology for fabrication of ramie fiber PLA composites with enhanced mechanical properties. Industrial Crops and Products 162, 113-312 (2021)10.1016/j.indcrop.2021.113312 ↗
7. Pei, X.Y., Chen, L., Gao, Y., Li, J., Tang, Y.: Effect of reinforcement structures on vibration performance of composites. J. Compos. Mater. 51, 3149–3161 (2017)10.1177/0021998316689602 ↗
8. Bilisik, K.: Multiaxis 3D woven preform and properties of multiaxis 3D woven and 3D orthogonal woven carbon/epoxy composites. J Reinfor Plastic and Compos. 29, 1173–1186 (2010)10.1177/0731684409103153 ↗
9. Bilisik, K.: Multiaxis 3D Weaving: Comparison of Developed Two Weaving Methods -Tube-Rapier Weaving Versus Tube-Carrier Weaving and Effects of Bias Yarn Path to the Preform Properties. Fibers and Polym 11, 104–114 (2010)10.1007/s12221-010-0104-y ↗
10. Sugie, T., Nakai, A., Hamada, H.: Effect of CF/GF fibre hybrid on impact properties of multi-axial warp knitted fabric composite materials. Compos. A Appl. Sci. Manuf. 40, 1982–1990 (2009)10.1016/j.compositesa.2009.08.005 ↗
11. Ikbal, H., Wang, Q., Azzam, A., Li, W.: Effect of hybrid ratio and laminate geometry on compressive properties of carbon/glass hybrid composites. Fibers and Polymers 17, 117–129 (2016)10.1007/s12221-016-5706-6 ↗
12. Arikoglu, A.: Multi-objective optimal design of hybrid viscoelastic/composite sandwich beams by using the generalized differential quadrature method and the non-dominated sorting genetic algorithm II. Struct. Multidiscip. Optim. 56, 885–901 (2017)10.1007/s00158-017-1695-3 ↗
13. Luczak, M.M., Telega, J., Zagato, N., Mucchi, E.: On the damage detection of a laboratory scale model of a tripod supporting structure by vibration-based methods. Mar. Struct. 64, 146–160 (2019)10.1016/j.marstruc.2018.11.002 ↗
14. Rajesh, M., Pitchaimani, J.: Experimental investigation on buckling and free vibration behavior of woven natural fiber fabric composite under axial compression. Compos. Struct. 163, 302–311 (2017)10.1016/j.compstruct.2016.12.046 ↗
15. Cao, M.S., Sha, G.G., Gao, Y.F., Ostachowicz, W.: Structural damage identification using damping: a compendium of uses and features. Smart Mater. Struct. 26, 043001 (2017)10.1088/1361-665X/aa550a ↗
16. Plagianakos, T.S., Saravanos, D.A.: High-order layerwise mechanics and finite element for the damped dynamic characteristics of sandwich composite beams. Int. J. Solids Struct. 41, 6853–6871 (2004)10.1016/j.ijsolstr.2004.05.038 ↗
17. Kaiser, H.: Non-destructive testing techniques for FRP rehabilitated concrete-I: a critical review. Int. J. Materials and Product Technology. 21, 349-384 (2004)10.1504/IJMPT.2004.004996 ↗
18. Yuan, L.J., Fan, W., Yang, X., Ge, S., Xia, C., Foong, S.Y., Liew, R.K., Wang, S., Van, Le Q., Lam, S.S.: Piezoelectric PAN/BaTiO3 nanofiber membranes sensor for structural health monitoring of real-time damage detection in composite. Composites Communications 25, 100680 (2021)10.1016/j.coco.2021.100680 ↗
19. Fan, W., Dang, W.S., Liu, T., Li, J.Z., Xue, L.L., Yuan, L.J., Dong, J.J.: Fatigue behavior of the 3D orthogonal carbon/glass fibers hybrid composite under three-point bending load. Materials & Design 183, 108112 (2019)10.1016/j.matdes.2019.108112 ↗
20. Sun, B.Z., Hu, D., Gu, B.H.: Transverse impact damage and energy absorption of 3-D multi-structured knitted composite. Compos. B Eng. 40, 572–583 (2009)10.1016/j.compositesb.2008.12.005 ↗
21. Guan, C., Zhang, H., Wang, X., Miao, H., Zhou, L., Liu, F.: Experimental and theoretical modal analysis of full-sized wood composite panels supported on four nodes. Materials 10, 2-15 (2017)10.3390/ma10060683 ↗
22. Jiang, D., Zhang, D., Fei, Q., Wu, S.: An approach on identification of equivalent properties of honeycomb core using experimental modal data. Finite Elem. Anal. Des. 90, 84–92 (2014)10.1016/j.finel.2014.06.006 ↗
23. Drach, B., Drach, A., Tsukrov, I.: Prediction of the effective elastic moduli of materials with irregularly-shaped pores based on the pore projected areas. Int. J. Solids Struct. 51, 2687–2695 (2014)10.1016/j.ijsolstr.2014.03.042 ↗
24. Sigrist, J.-F., Broc, D.: Homogenisation method for the modal analysis of a nuclear reactor with internal structures modelling and fluid–structure-interaction coupling. Nucl. Eng. Des. 237, 431–440 (2007)10.1016/j.nucengdes.2006.08.006 ↗
25. Boudjemai, A., Amri, R., Mankour, A., Salem, H., Bouanane, M.H., Boutchicha, D.: Modal analysis and testing of hexagonal honeycomb plates used for satellite structural design. Mater. Des. 35, 266–275 (2012)10.1016/j.matdes.2011.09.012 ↗
26. Tan, Y., Yan, Y., Li, X., Guo, F.: Numerical analysis of the elastic properties of 3D needled carbon/carbon composites. Mech. Compos. Mater. 53, 551–562 (2017)10.1007/s11029-017-9685-5 ↗
27. Rabiee, A., Ghasemnejad, H.: Improvement of specific energy absorption of composite tubular absorbers using various stitching pattern designs. Appl. Compos. Mater. 27, 717–738 (2020)10.1007/s10443-020-09842-2 ↗
28. Sun, B.Z., Niu, Z., Jin, L., Zhang, Y., Gu, B.: Experimental investigation and numerical simulation of three-point bending fatigue of 3D orthogonal woven composite. J. Text. Inst. 103, 1312–1327 (2012)10.1080/00405000.2012.677569 ↗
29. Lv, L., Bohong, G.: Transverse impact damage and energy absorption of three-dimensional orthogonal hybrid woven composite: experimental and FEM simulation. J. Compos. Mater. 42, 1763–1786 (2008)10.1177/0021998308093718 ↗
30. Lapusta, Y., Harich, J., Wagner, W.: Three-dimensional FE model for fiber interaction effects during microbuckling in composites with isotropic and anisotropic fibers. Commun. Numer. Methods Eng. 24, 2206–2215 (2007)10.1002/cnm.1084 ↗
31. Li, B., Zhang, C.-R., Cao, F., Wang, S.-Q., Chen, B., Li, J.-S.: Effects of fiber surface treatments on mechanical properties of T700 carbon fiber reinforced BN–Si3N4 composites. Mater. Sci. Eng., A 471, 169–173 (2007)10.1016/j.msea.2007.03.022 ↗
32. Xin, H., Liu, Y., Mosallam, A.S., He, J., Du, A.: Evaluation on material behaviors of pultruded glass fiber reinforced polymer (GFRP) laminates. Compos. Struct. 182, 283–300 (2017)10.1016/j.compstruct.2017.09.006 ↗
33. Fan, W., Xue, L.L., Wei, T., Dong, J., Li, J.J., Yuan, L.J., Dang, W.S., Sun, R.J., Chen, X.G.: Enhancement of mechanical and electromagnetic absorbing properties of carbon/glass hybrid composites with a three-dimensional quasi-isotropic braided structure. Text. Res. J. 89, 4896–4905 (2019)10.1177/0040517519844206 ↗
34. Fan, W., Dong, J.J., Wei, B.X.: Fast and accurate bending modulus prediction of 3D woven composites via experimental modal analysis. Polym. Test. 78, 105938 (2019)10.1016/j.polymertesting.2019.105938 ↗
35. Pei, X.Y., Li, J.L., Chen, K., Ding, G.: Vibration modal analysis of three-dimensional and four directional braided composites. Compos. B Eng. 69, 212–221 (2015)10.1016/j.compositesb.2014.10.001 ↗
36. Yesilyurt, I., Gursoy, H.: Estimation of elastic and modal parameters in composites using vibration analysis. J. Vibrat. Control 21, 509–524 (2015)10.1177/1077546313486275 ↗