Influence of Fiber Orientation and Adhesion Properties On Tailored Fiber-reinforced Elastomers
Source abstract
Abstract
This research focuses on the investigation of endless fiber-reinforced elastomeric materials with special tailoring by different fiber orientations in the composite structure. Therefore, a modified testing device including a suitable specimen production was carried out and the comparability of tests conducted at different test scales (micro- to macro testing level) was proven. Two elastic matrix materials (silicone and polyurethane) and reinforcing fiber types (glass- and polyester fibers) were investigated in all combinations. Due to the important effect on the shear behavior during the deformation of textiles significantly influenced by the fiber orientations of the warp- and weft-yarns, a testing plan was established by using one material combination as a reference setting. Generally, the results reveal a good comparability between different testing levels for the same fiber-matrix combinations and the modified composite testing device has been proven. Furthermore, the significant influence of different fiber orientations on the shear stiffness was investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Analysis and Optimization · Mechanical Behavior of Composites · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T.: Induced material degradation of elastomers in harsh environments. Polym. Test. 69, 107–115 (2018). https://doi.org/10.1016/j.polymertesting.2018.05.01610.1016/j.polymertesting.2018.05.016 ↗
2. Hoffmann, J.: Characterization of fibre reinforced elastomers for shape morphing structural surfaces. Dissertation, Technical University of Munich (2012)
3. Koschmieder, M.: Verarbeitung und Eigenschaften von Faserverbundkunststoffen mit Elastomermatrix. Dissertation, Rheinisch-Westfälischen Technischen Hochschule Aachen: (2000)
4. Connolly, F., Walsh, C.J., Bertoldi, K.: Automatic design of fiber-reinforced soft actuators for trajectory matching. Proc. Natl. Acad. Sci. U.S.A. 114, 51–56 (2017). https://doi.org/10.1073/pnas.161514011410.1073/pnas.1615140114 ↗
5. Roche, E.T., Wohlfarth, R., Overvelde, J.T.B., Vasilyev, N.V., et al.: A bioinspired soft actuated material. Adv. Mater. Weinheim 26, 1200–1206 (2014). https://doi.org/10.1002/adma.20130401810.1002/adma.201304018 ↗
6. Zhang, Q., Wommer, J., O’Rourke, C., Teitelman, J., et al.: Origami and kirigami inspired self-folding for programming three-dimensional shape shifting of polymer sheets with light. Extreme Mech. Lett. 11, 111–120 (2017). https://doi.org/10.1016/j.eml.2016.08.00410.1016/j.eml.2016.08.004 ↗
7. Martinez, R.V., Fish, C.R., Chen, X., Whitesides, G.M.: Elastomeric Origami. Programmable Paper-Elastomer Composites as Pneumatic Actuators. Adv. Funct. Mater. 22, 1376–1384 (2012). https://doi.org/10.1002/adfm.20110297810.1002/adfm.201102978 ↗
8. Cianchetti, M., Laschi, C., Menciassi, A., Dario, P.: Biomedical applications of soft robotics. Nat. Rev. Mater. 3, 143–153 (2018). https://doi.org/10.1038/s41578-018-0022-y10.1038/s41578-018-0022-y ↗
9. Lu, T., Shi, Z., Shi, Q., Wang, T.J.: Bioinspired bicipital muscle with fiber-constrained dielectric elastomer actuator. Extreme Mech. Lett. 6, 75–81 (2016). https://doi.org/10.1016/j.eml.2015.12.00810.1016/j.eml.2015.12.008 ↗
10. Zhang, X., Fan, X., Yan, C., Li, H., et al.: Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide. ACS Appl. Mater. Interfaces 4, 1543–1552 (2012). https://doi.org/10.1021/am201757v10.1021/am201757v ↗
11. Cherif, C.: Textile Werkstoffe für den Leichtbau. Techniken - Verfahren - Materialien - Eigenschaften. Springer-Verlag Berlin Heidelberg, Berlin (2011)10.1007/978-3-642-17992-1 ↗
12. Kalinka, G., Neumann, B.: Bestimmung von Interface-Festigkeit oder Trennarbeit mit dem Pull-out-Versuch (2005)
13. Zhou, J., Li, Y., Li, N., Hao, X., et al.: Interfacial shear strength of microwave processed carbon fiber/epoxy composites characterized by an improved fiber-bundle pull-out test. Compos. Sci. Technol. 133, 173–183 (2016). https://doi.org/10.1016/j.compscitech.2016.07.03310.1016/j.compscitech.2016.07.033 ↗
14. Piggott, M.R.: Why interface testing by single-fibre methods can be misleading. Compos. Sci. Technol. 57, 965–974 (1997). https://doi.org/10.1016/S0266-3538(97)00036-510.1016/S0266-3538(97)00036-5 ↗
15. Zhandarov, S.: Characterization of fiber/matrix interface strength. Applicability of different tests, approaches and parameters. Compos. Sci. Technol. 65, 149–160 (2005). https://doi.org/10.1016/j.compscitech.2004.07.00310.1016/j.compscitech.2004.07.003 ↗
16. Kim, J.-K., Mai, Y.-W.: Engineered interfaces in fiber reinforced composites, 1st edn. Elesvier Science Ltd, Oxford (1998)
17. Palola, S., Sarlin, E., Kolahgar Azari, S., Koutsos, V., et al.: Microwave induced hierarchical nanostructures on aramid fibers and their influence on adhesion properties in a rubber matrix. Appl. Surf. Sci. 410, 145–153 (2017). https://doi.org/10.1016/j.apsusc.2017.03.07010.1016/j.apsusc.2017.03.070 ↗
18. Beter, J., Schrittesser, B., Fuchs, P.: Investigation of adhesion properties in load coupling applications for flexible composites. Mater. Today-Proc. (2020). https://doi.org/10.1016/j.matpr.2020.01.18110.1016/j.matpr.2020.01.181 ↗
19. Schulz, E., Kalinka, G., Auersch, W.: Effect of transcrystallization in carbon fiber reinforced poly(p -phenylene sulfide) composites on the interfacial shear strength investigated with the single fiber pull-out test. J. Macromol. Sci. Part B. 35, 527–546 (2006). https://doi.org/10.1080/0022234960822039310.1080/00222349608220393 ↗
20. Desarmot, G., Favre, J.: Advances in pull-out testing and data analysis. Compos. Sci. Technol. 42, 151–187 (1991). https://doi.org/10.1016/0266-3538(91)90016-I10.1016/0266-3538(91)90016-I ↗
21. Viel, Q., Esposito, A., Saiter, J.-M., Santulli, C., et al.: Interfacial Characterization by Pull-Out Test of Bamboo Fibers Embedded in Poly(Lactic Acid). Fibers (2018). https://doi.org/10.3390/fib601000710.3390/fib6010007 ↗
22. Kalinka, G., Leistner, A., Hampe, A.: Characterisation of the fibre/matrix interface in reinforced polymers by the push-in technique. Compos. Sci. Technol. 57, 845–851 (1997). https://doi.org/10.1016/S0266-3538(96)00159-510.1016/S0266-3538(96)00159-5 ↗
23. Domnanovich, A., Peterlik, H., Kromp, K.: Determination of interface parameters for carbon/carbon composites by the fibre-bundle pull-out test. Compos. Sci. Technol. 56, 1017–1029 (1996). https://doi.org/10.1016/0266-3538(96)00060-710.1016/0266-3538(96)00060-7 ↗
24. Zarges, J.-C., Kaufhold, C., Feldmann, M., Heim, H.-P.: Single fiber pull-out test of regenerated cellulose fibers in polypropylene. An energetic evaluation. Compos. Part A 105, 19–27 (2018). https://doi.org/10.1016/j.compositesa.2017.10.03010.1016/j.compositesa.2017.10.030 ↗
25. Neitzel, M., Mitschang, P., Breuer, U.: Handbuch Verbundwerkstoffe. Werkstoffe, Verarbeitung, Anwendung. Carl Hanser Fachbuchverlag, Munich (2014)
26. Berthold, U.: Beitrag zur Thermoformung gewebeverstärkter Thermoplaste mittels elastischer Stempel. Dissertation, Technische Universität Chemnitz: (2001)
27. Keilig, Th, Arendts, F.J.: Ermittlung und Modellierung des Umformverhaltens von thermoplastischen Gewebeprepregs unter besonderer Berücksichtigung der Atlas-1/7-Bindung. In: Verbundwerkstoffe und Werkstoffverbund. Verbundwerkstoffe und Werkstoffverbund, Kaiserslautern, Germany, September: (1997)
28. Muliana, A., Rajagopal, K.R., Tscharnuter, D., Schrittesser, B., et al.: Determining material properties of natural rubber using fewer material moduli in virtue ofa novel constitutive approach for elastic bodies. Rubber Chem. Technol. 91, 375–389 (2018). https://doi.org/10.5254/RCT.18.8167510.5254/RCT.18.81675 ↗
29. Mansouri, M., Fuchs, P.F., Schuecker, C.: Hyperelastic modeling of woven structures undergoing large deformations. In: 18th European Conference on Composite Materials ECCM18, Athen, 2018 (2018)
30. Technical Committee ISO/TC 45: Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties. International Organization of Standardization, Geneva (2011) CH(ISO 37)
31. Eurpean Commitee for Standardization: Plastics. Determination of tensile properties. BSI British Standards, London ICS 83.120 (1997)
32. Hampe, A., Kalinka, G., Meretz, S., Schulz, E.: An advanced equipment for single-fibre pull-out test designed to monitor the fracture process. Compos. 26, 40–46 (1995). https://doi.org/10.1016/0010-4361(94)P3628-E10.1016/0010-4361(94)P3628-E ↗
33. D13 Committee: Test Method for Tensile Properties of Yarns by the Single-Strand Method. ASTM International, Conshohocken, W., PA(ASTM 2256) (2015)
34. Abts, G.: Einführung in die Kautschuktechnologie. Hanser, München (2019)10.1007/978-3-446-45855-0 ↗
35. Lang, R.W., Stutz, H., Heym, M., Nissen, D.: Polymere hochleistungs-faserverbundwerkstoffe. Angew. Makromol. Chemie 145, 267–321 (1986). https://doi.org/10.1002/apmc.1986.05145011510.1002/apmc.1986.051450115 ↗