The Numerical Approach to Mosaic Patterns in Filament-Wound Composite Pipes
Source abstract
Abstract
This paper is focused on radial-compression of filament-wound composite pipes. An important but frequently disregarded is the issue of the choice of the winding pattern. The influence of the pattern on the strength of pipes is the subject of the investigation. Since the real geometry of filament-wound tubes is complicated researchers use simplified models (especially in “zig-zag” area), which are insufficient to reflect real behavior of tubes. An attempt to investigate a more precise geometry is presented in this work. A python script is used to model the particular areas typical for filament-wound elements. Hashin criterion is used to reflect damage in the material during compression. Results of numerical simulations are discussed and compared with experimental from other researchers. Based on the prepared model – the influence of pattern on the strength of a composite pipe is possible. Although some improvements may be introduced, a satisfactory agreement between the experiment and numerical simulation was achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Wang, R., Jiao, W., Liu, W., Yang, F.: A new method for predicting dome thickness of composite pressure vessels. J. Reinf. Plast. Compos. 29, 3345–3352 (2010). https://doi.org/10.1177/073168441037633010.1177/0731684410376330 ↗
2. Zu, L., Koussios, S., Beukers, A.: A novel design solution for improving the performance of composite toroidal hydrogen storage tanks. Int. J. Hydrogen Energy. 37, 14343–14350 (2012). https://doi.org/10.1016/j.ijhydene.2012.07.00910.1016/j.ijhydene.2012.07.009 ↗
3. Rafiee, R., Torabi, M.A.: Stochastic prediction of burst pressure in composite pressure vessels. Compos. Struct. 185, 573–583 (2018). https://doi.org/10.1016/j.compstruct.2017.11.06810.1016/j.compstruct.2017.11.068 ↗
4. Vasiliev, V. V., Morozov, E. V.: Advanced Mechanics of Composite Materials and Structural Elements. Elsevier Ltd (2018)10.1016/B978-0-08-102209-2.00002-5 ↗
5. Xia, M., Takayanagi, H., Kemmochi, K.: Analysis of multi-layered filament-wound composite pipes under internal pressure. Compos. Struct. 53, 483–491 (2001). https://doi.org/10.1016/S0263-8223(01)00061-710.1016/S0263-8223(01)00061-7 ↗
6. Soden, P.D., Leadbetter, D., Griggs, P.R., Eckold, G.C.: The strength of a filament wound composite under biaxial loading. Composites. 9, 247–250 (1978). https://doi.org/10.1016/0010-4361(78)90177-510.1016/0010-4361(78)90177-5 ↗
7. Bai, J., Seeleuthner, P., Bompard, P.: Mechanical behaviour of ±55° filament-wound glass-fibre/epoxy-resin tubes: I. Microstructural analyses, mechanical behaviour and damage mechanisms of composite tubes under pure tensile loading, pure internal pressure, and combined loading. Compos. Sci. Technol. 57, 141–153 (1997). https://doi.org/10.1016/S0266-3538(96)00124-810.1016/S0266-3538(96)00124-8 ↗
8. Mian, H.H., Wang, G., Dar, U.A., Zhang, W.: Optimization of composite material system and lay-up to achieve minimum weight pressure vessel. Appl. Compos. Mater. 20, 873–889 (2013). https://doi.org/10.1007/s10443-012-9305-410.1007/s10443-012-9305-4 ↗
9. Hernández-Moreno, H., Douchin, B., Collombet, F., Choqueuse, D., Davies, P.: Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure. Compos. Sci. Technol. 68, 1015–1024 (2008). https://doi.org/10.1016/j.compscitech.2007.07.02010.1016/j.compscitech.2007.07.020 ↗
10. Almeida, J.H.S., Ribeiro, M.L., Tita, V., Amico, S.C.: Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: Experimental and numerical approaches. Mater. Des. 96, 431–438 (2016). https://doi.org/10.1016/j.matdes.2016.02.05410.1016/j.matdes.2016.02.054 ↗
11. Shen, C., Han, X.: Damage and failure analysis of filament wound composite structure considering fibre crossover and undulation. Adv. Compos. Lett. 27, 55–70 (2018). https://doi.org/10.1177/09636935180270020210.1177/096369351802700202 ↗
12. Manoj Prabhakar, M., Rajini, N., Ayrilmis, N., Mayandi, K., Siengchin, S., Senthilkumar, K., Karthikeyan, S., Ismail, S.O.: An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability. Compos. Struct. 230, (2019). https://doi.org/10.1016/j.compstruct.2019.11141910.1016/j.compstruct.2019.111419 ↗
13. Almeida Júnior, J.H., Ribeiro, M.L., Tita, V., Amico, S.C.: Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression. Compos. Struct. 160, 204–210 (2017a). https://doi.org/10.1016/j.compstruct.2016.10.03610.1016/j.compstruct.2016.10.036 ↗
14. Mansour, G., Tzikas, K., Tzetzis, D., Korlos, A., Sagris, D., David, K.: Experimental and Numerical Investigation on the Torsional Behaviour of Filament Winding-Manufactured Composite Tubes. Appl. Mech. Mater. 834, 173–178 (2016). https://doi.org/10.4028/www.scientific.net/amm.834.17310.4028/www.scientific.net/amm.834.173 ↗
15. Hu, Y., Yang, M., Zhang, J., Song, C., Zhang, W.: Research on torsional capacity of composite drive shaft under clockwise and counter-clockwise torque. Adv. Mech. Eng. 7, 1–7 (2015). https://doi.org/10.1177/168781401558210910.1177/1687814015582109 ↗
16. Diniz Melo, J.D., Levy Neto, F., De Araujo Barros, G., De Almeida Mesquita, F.N.: Mechanical behavior of GRP pressure pipes with addition of quartz sand filler. J. Compos. Mater. 45, 717–726 (2011). https://doi.org/10.1177/002199831038559310.1177/0021998310385593 ↗
17. Martins, L.A.L., Bastian, F.L., Netto, T.A.: Reviewing some design issues for filament wound composite tubes. Mater. Des. 55, 242–249 (2014). https://doi.org/10.1016/j.matdes.2013.09.05910.1016/j.matdes.2013.09.059 ↗
18. Robert, M., Fam, A.: Long-term performance of GFRP tubes filled with concrete and subjected to salt solution. J. Compos. Constr. 16, 217–224 (2012). https://doi.org/10.1061/(ASCE)CC.1943-5614.000025110.1061/(ASCE)CC.1943-5614.0000251 ↗
19. Son, J.K., Fam, A.: Finite element modeling of hollow and concrete-filled fiber composite tubes in flexure: Model development, verification and investigation of tube parameters. Eng. Struct. 30, 2656–2666 (2008). https://doi.org/10.1016/j.engstruct.2008.02.01410.1016/j.engstruct.2008.02.014 ↗
20. Qasrawi, Y., Heffernan, P.J., Fam, A.: Dynamic behaviour of concrete filled FRP tubes subjected to impact loading. Eng. Struct. 100, 212–225 (2015a). https://doi.org/10.1016/j.engstruct.2015.06.01210.1016/j.engstruct.2015.06.012 ↗
21. Qasrawi, Y., Heffernan, P.J., Fam, A.: Performance of concrete-filled FRP tubes under field close-in blast loading. J. Compos. Constr. 19, 1–12 (2015b). https://doi.org/10.1061/(ASCE)CC.1943-5614.000050210.1061/(ASCE)CC.1943-5614.0000502 ↗
22. Eggers, F., Almeida, J.H.S., Azevedo, C.B., Amico, S.C.: Mechanical response of filament wound composite rings under tension and compression. Polym. Test. 78, (2019). https://doi.org/10.1016/j.polymertesting.2019.10595110.1016/j.polymertesting.2019.105951 ↗
23. Zu, L., Xu, H., Wang, H., Zhang, B., Zi, B.: Design and analysis of filament-wound composite pressure vessels based on non-geodesic winding. Compos. Struct. 207, 41–52 (2019). https://doi.org/10.1016/J.COMPSTRUCT.2018.09.00710.1016/J.COMPSTRUCT.2018.09.007 ↗
24. Almeida Júnior, J.H., Ribeiro, M.L., Tita, V., Amico, S.C.: Stacking sequence optimization in composite tubes under internal pressure based on genetic algorithm accounting for progressive damage. Compos. Struct. 178, 20–26 (2017b). https://doi.org/10.1016/j.compstruct.2017.07.05410.1016/j.compstruct.2017.07.054 ↗
25. Rousseau, J., Perreux, D., Verdière, N.: The infuence of winding patterns on the damage behaviour of flament-wound pipes. Compos. Sci. Technol. 59, 1439–1449 (1999). https://doi.org/10.1016/S0168-583X(00)00540-110.1016/S0168-583X(00)00540-1 ↗
26. Morozov, E.V.: The effect of filament-winding mosaic patterns on the strength of thin-walled composite shells. Compos. Struct. 76, 123–129 (2006). https://doi.org/10.1016/j.compstruct.2006.06.01810.1016/j.compstruct.2006.06.018 ↗
27. Azevedo, C.B., Humberto, J., Almeida, S., Flores, H.F., Eggers, F., Amico, S.C.: Influence of mosaic pattern on hygrothermally-aged filament wound composite cylinders under axial compression. J. Compos. Mater. 54, 2651–2659 (2020). https://doi.org/10.1177/002199831989914410.1177/0021998319899144 ↗
28. Shen, C., Han, X., Guo, Z.: A new method for calculating the stiffness of filament wound composites considering the fibre undulation and crossover. Adv. Compos. Lett. 23, 88–95 (2014). https://doi.org/10.1177/09636935140230040210.1177/096369351402300402 ↗
29. Błażejewski, W.: Kompozytowe zbiorniki wysokociśnieniowe wzmocnione włóknami według wzorów mozaikowych. Oficyna Wydawnicza Politechniki Wrocławskiej (2013)
30. Hashin, Z.: Failure Criteria for Unidirectional Fiber Composites. J. Appl. Mech. 47, 329–334 (1980). https://doi.org/10.1115/1.315366410.1115/1.3153664 ↗
31. Hashin, Z., Rotem, A.: A Fatigue Failure Criterion for Fiber Reinforced Materials. J. Compos. Mater. 7, 448–464 (1973). https://doi.org/10.1177/00219983730070040410.1177/002199837300700404 ↗
32. Barbero, E.J., Cosso, F.A., Roman, R., Weadon, T.L.: Determination of material parameters for Abaqus progressive damage analysis of E-glass epoxy laminates. Compos. Part B Eng. 46, 211–220 (2013). https://doi.org/10.1016/j.compositesb.2012.09.06910.1016/j.compositesb.2012.09.069 ↗
33. Lapczyk, I., Hurtado, J.A.: Progressive damage modeling in fiber-reinforced materials. Compos. Part A Appl. Sci. Manuf. 38, 2333–2341 (2007). https://doi.org/10.1016/j.compositesa.2007.01.01710.1016/j.compositesa.2007.01.017 ↗
34. Lisbôa, T.V., Almeida, J.H.S., Dalibor, I.H., Spickenheuer, A., Marczak, R.J., Amico, S.C.: The role of winding pattern on filament wound composite cylinders under radial compression. Polym. Compos. 41, 2446–2454 (2020). https://doi.org/10.1002/pc.2554810.1002/pc.25548 ↗
35. Abaqus 6.14, Analysis User’s Manual, Dassault System, (2014)
36. Dalibor, I.H., Lisbôa, T.V., Marczak, R.J., Amico, S.C.: Optimum slippage dependent, non-geodesic fiber path determination for a filament wound composite nozzle. Eur. J. Mech. A/Solids. 82, 103994 (2020). https://doi.org/10.1016/j.euromechsol.2020.10399410.1016/j.euromechsol.2020.103994 ↗
37. Girão Coelho, A.M., Toby Mottram, J., Harries, K.A.: Finite element guidelines for simulation of fibre-tension dominated failures in composite materials validated by case studies. Compos. Struct. 126, 299–313 (2015). https://doi.org/10.1016/j.compstruct.2015.02.07110.1016/j.compstruct.2015.02.071 ↗