Simulation of Impulse Resistance Welding for Thermoplastic Matrix Composites
Source abstract
Abstract
The impulse resistance welding (IRW) process is modelled using a three-dimensional transient finite element model (FEM) featuring heat transfer and consolidation. The welding of single lap joints is simulated for APC-2 laminates, with additional PEEK film inserted at the welding interface. The effects of the power signal on (a) temperature uniformity in the welding interface and (b) processing times are investigated. Two welding configurations are evaluated; in the first one, the heating element outside the welding stack is left in-air, while in the second case, it is embedded in a conductive medium in order to improve temperature homogeneity within the welding interface. Based on criteria of consolidation and thermal degradation, optimum processing windows were simulated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Ageorges, C., Resistance Welding for Thermoplastic Composites, Ph.D. Thesis, Department of Mechanical and Mechatronic Engineering, University of Sydney, 2000.
2. Lambing, C. L. T., Don, R. C., Andersen, S. M., Holmes, S. T., Leach, B. S., and Gillespie, J.W. Jr., 'Design and Manufacture of an Automated Resistance Welder for Thermoplastic Composites', in Proceedings of the 49th Annual Technical Conference (ANTEC'91), 1991, pp. 2527–2531.
3. Xiao, X., Hoa, S. V., and Street, K. N., 'Repair of Thermoplastic Resin Composite by Fusion Bonding', Composite Bonding, ASTM STP 1227, 1994, pp. 30–44.10.1520/STP12913S ↗
4. Tackitt, K. D. and Gillespie, J.W. Jr., 'Through Transmission Ultrasonics for Process Monitoring of Thermoplastic Fusion Bonding', in Proceedings of the 11th Technical Conference of the American Society for Composites, 1996, pp. 812–821.
5. Todd, S. M., 'Joining Thermoplastic Composites', in Proceedings of the 22nd International SAMPE Technical Conference, 1990, pp. 383–392.
6. Ageorges, C., Ye, L., Mai, Y.-W., and Hou, M., 'Characteristics of Resistance Welding of Lap Shear Coupons. Part I: Heat Transfer', Composites Part A 29A, 1998, 899–909.10.1016/S1359-835X(98)00022-0 ↗
7. Arias, M. and Ziegmann, G., 'The Impulse Resistance Welding: A New Technique for Joining Advanced Thermoplastic Composite Parts', in Proceedings of the 41st International SAMPE Symposium, 1996, pp. 1361–1371.
8. Ageorges, C., Ye, L., and Hou, M., 'Experimental Investigation of the Resistance Welding of Thermoplastic Composite Materials. Part I: Heating Element and Heat Transfer', Composite Science and Technology 60, 2000, 1027–1039.10.1016/S0266-3538(00)00005-1 ↗
9. Ageorges, C., Ye, L., and Hou, M., 'Experimental Investigation of the Resistance Welding of Thermoplastic Composite Materials. Part II: Consolidation Quality and Fracture Mechanisms', Composite Science and Technology, 2000 (in press).10.1016/S0266-3538(00)00005-1 ↗
10. Eveno, E. C. and Gillespie, J. W. Jr., 'Resistance Welding of Graphite Polyetheretherketone Composites: An Experimental Investigation', Journal of Thermoplastic Composite Materials 1, 1998, 322–338.10.1177/089270578800100402 ↗
11. Wise, R. J. and Watson, M. N., 'A New Approach for Joining Plastics and Composites to Metals', in Proceedings of the 50th Annual Technical Conference (ANTEC'92), 1992, pp. 2113–2116.
12. Ageorges, C., Ye, L., Mai, Y.-W., and Hou, M., 'Characteristics of Resistance Welding of Lap Shear Coupons. Part II: Consolidation', Composites Part A 29A, 1998, 911–919.10.1016/S1359-835X(98)00023-2 ↗