Mechanical and Microwave-Absorbing Properties of Carbon Nanotube-Reinforced Fiber Composites: Advances in Theoretical Research

1. Chen, Y., Wu, Y., Zhao, W.: Constructing Ti3C2Tx/Carbon fiber hybrids for enhancing the interfacial strength and erosion wear resistance of EP-based composite coating. Carbon. 202, 196–206 (2023). https://doi.org/10.1016/j.carbon.2022.11.00610.1016/j.carbon.2022.11.006 ↗

2. Xu, X., Peng, G., Zhang, B., Shi, F., Gao, L., Gao, J.: Material performance, manufacturing methods, and [review]ngineering applications [review]n aviation of carbon fiber reinforced polymers: A comprehensive review [Review]. Thin-Walled Struct. 209, 112899 (2025). https://doi.org/10.1016/j.tws.2024.11289910.1016/j.tws.2024.112899 ↗

3. Santos, A.G.A., Nascimento, D.C.B., Lopes, F.P.D., Simonassi, N.T., Monteiro, S.N., da Silva, A.C.R., Candido, V.S.: Investigation of the flexural and Charpy impact properties of polymer composites reinforced with Tururi (Manicaria saccifera) fibrous fabric. Polymers. 17(4), 466 (2015). https://doi.org/10.3390/polym1704046610.3390/polym17040466 ↗

4. Raj, L., Pathak, H., Zafar, S., Gupta, A.: Fatigue life and crack growth rate of carbon fiber reinforced polymer composite at elevated temperature environment: An experimental study. Polym. Compos. (2025). https://doi.org/10.1002/pc.2953410.1002/pc.29534 ↗

5. Kidangan, R.T., Krishnamurthy, C.V., Balasubramaniam, K.: Identification of the fiber breakage orientation in carbon fiber reinforced polymer composites using induction thermography. NDT & E International 122, 102498 (2021). https://doi.org/10.1016/j.ndteint.2021.10249810.1016/j.ndteint.2021.102498 ↗

6. Bilge, K., Javanshour, F., Raheman, A.B., Papila, M.: A comparative fractographic analysis for the effect of polymeric nanofiber reinforcements on the tensile behavior of multi-layered epoxy nanocomposites. Polym. Eng. Sci. (2025). https://doi.org/10.1002/pen.2715010.1002/pen.27150 ↗

7. Wang, X., Zhao, X., Chen, S., Wu, Z.: Static and fatigue behavior of basalt fiber-reinforced thermoplastic epoxy composites. J. Compos. Mater. 54(18), 2389–2398 (2020). https://doi.org/10.1177/002199831989684210.1177/0021998319896842 ↗

8. Carreras, L., Bak, B.L.V., Jensen, S.M., Lequesne, C., Xiong, H., Lindgaard, E.: Benchmark test for mode I fatigue-driven delamination in GFRP composite laminates: Experimental results and simulation with the inter-laminar model in SAMCEF. Compos. Part. B-Engineering. 253, Article110529 (2023). https://doi.org/10.1016/j.compositesb.2023.11052910.1016/j.compositesb.2023.110529 ↗

9. Liu, Y., Li, J., Kuang, Y., Liu, Z., Zhang, Z., Chen, X.: Effect of carbon nanotubes modification on bending fatigue properties of carbon fiber reinforced polyimide composites. Int. J. Fatigue. 175, 107814. (2023). https://doi.org/10.1016/j.ijfatigue.2023.10781410.1016/j.ijfatigue.2023.107814 ↗

10. Li, C.X., Kalfon-Cohen, E., Lee, J., Furtado, C., Patel, P., Kopp, R., Hank, T.J., Magato, J., Kinsella, M., Kessler, S.S., Wardle, B.L.: Interlaminar reinforcement of carbon fiber reinforced polyimide composites using vertically aligned carbon nanotubes. Compos. Part. B-Engineering. 292, 112098 (2025). https://doi.org/10.1016/j.compositesb.2024.11209810.1016/j.compositesb.2024.112098 ↗

11. Zhan, Y., Xia, L., Yang, H., Zhou, N., Ma, G., Zhang, T., Huang, X., Xiong, L., Qin, C., Wen, G.: Tunable electromagnetic wave absorbing properties of carbon nanotubes/carbon fiber composites synthesized directly and rapidly via an innovative induction heating technique. Carbon. 175, 101–111 (2021). https://doi.org/10.1016/j.carbon.2020.12.08010.1016/j.carbon.2020.12.080 ↗

12. Cheng, Z., Wang, S., Zhou, J., Yan, J., Liu, Y., Tao, J., Liu, Z., Duan, L., Yan, Y., Yao, J., Wang, Y., Wang, W., Yao, Z., Ma, Y.: 3D printed flexible composites based on carbon fiber-led interfacial modification strategy for enhanced microwave absorption. Chem. Eng. J. 502, Article157810 (2024). https://doi.org/10.1016/j.cej.2024.15781010.1016/j.cej.2024.157810 ↗

13. Wu, J., Gao, Y.: High-performance electromagnetic shielding composite materials based on carbon nanotubes and sandwich laminate structures. Polym. Compos. 45(15), 13639–13649 (2024). https://doi.org/10.1002/pc.2872410.1002/pc.28724 ↗

14. Zhang, C., Ling, Y., Zhang, X., Liang, M., Zou, H.: Ultra-thin carbon fiber reinforced carbon nanotubes modified epoxy composites with superior mechanical and electrical properties for the aerospace field. Compos. Part. a-Applied Sci. Manuf. 163, 107197 (2022). https://doi.org/10.1016/j.compositesa.2022.10719710.1016/j.compositesa.2022.107197 ↗

15. Dehrooyeh, S., Vaseghi, M., Sohrabian, M., Sameezadeh, M.: Glass fiber/carbon nanotube/epoxy hybrid composites: Achieving superior mechanical properties. Mech. Mater. 161, 104025. (2021). https://doi.org/10.1016/j.mechmat.2021.10402510.1016/j.mechmat.2021.104025 ↗

16. Yue, Y., Wang, Y., Xu, X., Cui, B., Yao, Z., Wang, Y., Wang, C., Wang, Y., Wang, Y.: Continuous growth of carbon nanotubes on the surface of carbon fibers for enhanced electromagnetic wave absorption properties. Ceram. Int. 48(2), 1869–1878 (2022). https://doi.org/10.1016/j.ceramint.2021.09.27110.1016/j.ceramint.2021.09.271 ↗

17. Li, S., Fan, Y., Li, X., Sun, T., Liu, Z., Wang, K., Zhao, Y.: Ultralight hard carbon nanotubes nanofiber foam/epoxy nanocomposites for comprehensive microwave absorption performance. Polym. Compos. 42(9), 4673–4683 (2021). https://doi.org/10.1002/pc.2617710.1002/pc.26177 ↗

18. Wang, C., Wang, Y., Jiang, H., Tan, H., Liu, D.: Continuous in-situ growth of carbon nanotubes on carbon fibers at various temperatures for efficient electromagnetic wave absorption. Carbon. 200, 94–107 (2022). https://doi.org/10.1016/j.carbon.2022.08.05310.1016/j.carbon.2022.08.053 ↗

19. Wu, J., Gao, Y., Hu, W., Lu, Z.: Influence of carbon nanotubes on the absorption performance and mechanical behavior of basalt fiber composite materials. Polym. Compos. 46(4), 3109–3121 (2025). https://doi.org/10.1002/pc.2915710.1002/pc.29157 ↗

20. Zhou, H.W., Mishnaevsky, L., Jr., Yi, H.Y., Liu, Y.Q., Hu, X., Warrier, A., Dai, G.M.: Carbon fiber/carbon nanotube reinforced hierarchical composites: Effect of CNT distribution on shearing strength. Compos. Part. B-Engineering 88, 201–211 (2016). https://doi.org/10.1016/j.compositesb.2015.10.03510.1016/j.compositesb.2015.10.035 ↗

21. Wang, H., Guo, Q., Wang, S., Gao, L., Shi, X.: Enhanced delamination resistance and through-thickness thermal conductivity of carbon fiber epoxy resin composites by in situ generation of interconnected Thick oriented matrix-carbon nanotube layer. Compos. Part. B-Engineering 297, 112297 (2025). https://doi.org/10.1016/j.compositesb.2025.11229710.1016/j.compositesb.2025.112297 ↗

22. Pan, J., Bian, L., Zhao, H., Zhao, Y.: A new micromechanics model and effective elastic modulus of nanotube reinforced composites. Comput. Mater. Sci. 113, 21–26 (2016). https://doi.org/10.1016/j.commatsci.2015.11.00910.1016/j.commatsci.2015.11.009 ↗

23. Xue, Z., Cheng, Y., Bian, L.: Waviness and agglomeration affecting on Elastic-Plastic Modulus of CNT reinforced composites. Mech. Solids. 58(9), 3302–3314 (2023). https://doi.org/10.3103/s002565442360124610.3103/s0025654423601246 ↗

24. Hassanzadeh-Aghdam, M.K., Mahmoodi, M.J., Ansari, R.: Creep performance of CNT polymer nanocomposites -An emphasis on viscoelastic interphase and CNT agglomeration. Compos. Part. B-Engineering 168, 274–281 (2019). https://doi.org/10.1016/j.compositesb.2018.12.09310.1016/j.compositesb.2018.12.093 ↗

25. Gunawardana, M., Kordi, B.: Time-Domain modeling of transmission line crossing using electromagnetic scattering theory. IEEE Trans. Power Delivery. 35(2), 1020–1027 (2020). https://doi.org/10.1109/tpwrd.2019.293409910.1109/tpwrd.2019.2934099 ↗

26. Kim, J., Torquato, S.: Effective electromagnetic wave properties of disordered stealthy hyperuniform layered media beyond the quasistatic regime. Optica. 10(8), 965–972 (2023). https://doi.org/10.1364/optica.48979710.1364/optica.489797 ↗

27. Nefedov, I.S., Tretyakov, S.A.: Effective medium model for two-dimensional periodic arrays of carbon nanotubes. Photonics Nanostructures-Fundamentals Appl. 9(4), 374–380 (2011). https://doi.org/10.1016/j.photonics.2011.04.00510.1016/j.photonics.2011.04.005 ↗

28. Soleimany, M.R., Jamal-Omidi, M., Nabavi, S.M., Tavakolian, M.: Multi-scale modeling and damage analysis of carbon Nanotube-Carbon Fiber-Reinforced polymeric composites. Iran. J. Sci. Technology-Transactions Mech. Eng. 47(1), 203–218 (2023). https://doi.org/10.1007/s40997-022-00509-w10.1007/s40997-022-00509-w ↗

29. Doagou-Rad, S., Jensen, J.S., Islam, A., Mishnaevsky, L., Jr.: Multiscale molecular dynamics-FE modeling of polymeric nanocomposites reinforced with carbon nanotubes and graphene. Compos. Struct. 217, 27–36 (2019). https://doi.org/10.1016/j.compstruct.2019.03.01710.1016/j.compstruct.2019.03.017 ↗

30. Yu, M., Ding, J., Xiao, R., Xie, W., Shan, C., Liu, Z., Ren, M., Sun, J.: Effects of carbon nanomaterials on the interfacial properties of carbon fiber reinforced epoxy resin composite. Polym. Compos. 45(16), 15201–15210 (2024). https://doi.org/10.1002/pc.2883010.1002/pc.28830 ↗

31. Kim, J.W., Gardner, J.M., Sauti, G., Wincheski, R.A., Jensen, B.D., Wise, K.E., Siochi, E.J.: Multi-scale hierarchical carbon nanotube fiber reinforced composites towards enhancement of axial/transverse strength and fracture toughness. Composites Part A: Applied Science and Manufacturing 167, 107449 (2023). https://doi.org/10.1016/j.compositesa.2023.10744910.1016/j.compositesa.2023.107449 ↗

32. Zeng, S., Duan, P., Shen, M., Xue, Y., Lu, F., Yang, L.: Interface enhancement of glass fiber fabric/epoxy composites by modifying fibers with functionalized MWCNTs. Compos. Interfaces. 26(4), 291–308 (2019). https://doi.org/10.1080/09276440.2018.149935410.1080/09276440.2018.1499354 ↗

33. Koo, W.-T., Kim, Y., Savagatrup, S., Yoon, B., Jeon, I., Choi, S.-J., Kim, I.-D., Swager, T.M.: Porous ion exchange polymer matrix for ultrasmall Au Nanoparticle-Decorated carbon nanotube chemiresistors. Chem. Mater. 31(15), 5413–5420 (2019). https://doi.org/10.1021/acs.chemmater.9b0050410.1021/acs.chemmater.9b00504 ↗

34. Morimune-Moriya, S., Iwahashi, Y., Nakamura, M., Ogawa, D., Nakamura, K.: Covalent introduction of Plasma-Treated carbon nanotubes into polyimide nanocomposites at Ultra-Low content. Eur. Polymer J. 202, 112609 (2024). https://doi.org/10.1016/j.eurpolymj.2023.11260910.1016/j.eurpolymj.2023.112609 ↗

35. Zhang, C., Zhang, X., Ling, Y., Liang, M., Zou, H.: Chitosan-doped carbon nanotubes encapsulating spread carbon fiber composites with superior mechanical, thermal, and electrical properties. Compos. Sci. Technol. 230, 109755 (2022). https://doi.org/10.1016/j.compscitech.2022.10975510.1016/j.compscitech.2022.109755 ↗

36. Jiang, H., Wang, Y., Wang, C., Li, M., Xu, Z.: Catalyst optimization and reduction condition of continuous growth of carbon nanotubes on carbon fiber surface. Ceram. Int. 49(15), 25469–25476 (2023). https://doi.org/10.1016/j.ceramint.2023.05.08710.1016/j.ceramint.2023.05.087 ↗

37. Zhang, W., Dai, M., Liang, X., Wang, X., Wei, W., Zhou, Z.: Interfacial enhancement by CNTs grafting towards High-Performance mechanical properties of carbon Fiber-Reinforced epoxy composites. Materials. 16(10), 3825 (2023). https://doi.org/10.3390/ma1610382510.3390/ma16103825 ↗

38. Li, Q., Church, J.S., Naebe, M., Fox, B.L.: Interfacial characterization and reinforcing mechanism of novel carbon nanotube - Carbon fibre hybrid composites. Carbon. 109, 74–86 (2016). https://doi.org/10.1016/j.carbon.2016.07.05810.1016/j.carbon.2016.07.058 ↗

39. Jian, L.: The effect of electrophoretic deposition of carbon nanotubes on carbon fiber on interfacial properties of the thermoplastic polyimide composite. Surf. Interface Anal. 56(2), 99–106 (2024). https://doi.org/10.1002/sia.727210.1002/sia.7272 ↗

40. Eshelby, J.D.: The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. Royal Soc. Lond. Ser. Math. Phys. Sci. 241(1226), 376–396 (1957). https://doi.org/10.1098/rspa.1957.013310.1098/rspa.1957.0133 ↗

41. Jain, A., Abdin, Y., Van Paepegem, W., Verpoest, I., Lomov, S.V.: Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models. Compos. Struct. 131, 692–706 (2015). https://doi.org/10.1016/j.compstruct.2015.06.00710.1016/j.compstruct.2015.06.007 ↗

42. Ogierman, W.: Data-Driven Mean-Field homogenization: Enhancing the accuracy of the Mori-Tanaka method. Compos. Struct. 358, 118985. (2025). https://doi.org/10.1016/j.compstruct.2025.11898510.1016/j.compstruct.2025.118985 ↗

43. Gupta, M., Ray, M.C., Patil, N.D., Kundalwal, S.I.: Effect of orientation of CNTs and piezoelectric fibers on the damping performance of multiscale composite plate. J. Intell. Mater. Syst. Struct. 34(2), 194–216 (2023). https://doi.org/10.1177/1045389x22109945110.1177/1045389x221099451 ↗

44. Ray, M.C.: A shear lag model of piezoelectric composite reinforced with carbon nanotubes-coated piezoelectric fibers. Int. J. Mech. Mater. Des. 6(2), 147–155 (2010). https://doi.org/10.1007/s10999-010-9118-210.1007/s10999-010-9118-2 ↗

45. Hu, Y.-G., Li, Y.F., Han, J., Hu, C.P., Chen, Z.H., Gu, S.T.: Prediction of interface stiffness of single-walled carbon nanotube-reinforced polymer composites by shear-lag model. Acta Mech. 230(8), 2771–2782 (2019). https://doi.org/10.1007/s00707-019-02426-710.1007/s00707-019-02426-7 ↗

46. Xu, K., Liu, Y., Mao, Z., Qian, X.: A novel finite element model for predicting the effective mechanical performances of graphene nanoplatelets and carbon nanotubes synergistically reinforced polymer nanocomposites [; early access]. Polym. Compos. (2025). https://doi.org/10.1002/pc.2973110.1002/pc.29731 ↗

47. Yun, G.J., Zhu, F.-Y., Lim, H.J., Choi, H.: A damage plasticity constitutive model for wavy CNT nanocomposites by incremental Mori-Tanaka approach. Compos. Struct. 258, 113178 (2021). https://doi.org/10.1016/j.compstruct.2020.11317810.1016/j.compstruct.2020.113178 ↗

48. Zhu, F., Park, C., Yun, G.J.: An extended Mori-Tanaka micromechanics model for wavy CNT nanocomposites with interface damage. Mech. Adv. Mater. Struct. 28(3), 295–307 (2021). https://doi.org/10.1080/15376494.2018.156213510.1080/15376494.2018.1562135 ↗

49. Hasanzadeh, M., Ansari, R., Hassanzadeh-Aghdam, M.K.: Micromechanical elastoplastic analysis of randomly oriented nonstraight carbon nanotube-reinforced polymer nanocomposites. Mech. Adv. Mater. Struct. 26(20), 1700–1710 (2019). https://doi.org/10.1080/15376494.2018.144422710.1080/15376494.2018.1444227 ↗

50. Swain, A., Roy, T.: Viscoelastic modeling and vibration damping characteristics of hybrid CNTs-CFRP composite shell structures. Acta Mech. 229(3), 1321–1352 (2018). https://doi.org/10.1007/s00707-017-2051-910.1007/s00707-017-2051-9 ↗

51. Kamarian, S., Pourasghar, A., Yas, M.H.: Eshelby-Mori-Tanaka approach for vibrational behavior of functionally graded carbon nanotube-reinforced plate resting on elastic foundation. J. Mech. Sci. Technol. 27(11), 3395–3401 (2013). https://doi.org/10.1007/s12206-013-0861-910.1007/s12206-013-0861-9 ↗

52. Duan, H., Wang, J., Huang, Z.: Micromechanics of composites [review]ith [review]nterface [review]ffects [Review]. Acta. Mech. Sin. 38(4) (2022). https://doi.org/10.1007/s10409-022-22025-x10.1007/s10409-022-22025-x ↗

53. Ray, M.C., Kundalwal, S.I.: A thermomechanical shear lag analysis of short fuzzy fiber reinforced composite containing wavy carbon nanotubes. Eur. J. Mech. a-Solids 44, 41–60 (2014). https://doi.org/10.1016/j.euromechsol.2013.10.00110.1016/j.euromechsol.2013.10.001 ↗

54. Jin, S.Y., Young, R.J., Eichhorn, S.J.: Controlling and mapping interfacial stress transfer in fragmented hybrid carbon fibre-carbon nanotube composites. Compos. Sci. Technol 100, 121–127 (2014). https://doi.org/10.1016/j.compscitech.2014.05.03410.1016/j.compscitech.2014.05.034 ↗

55. Ansari, R., Ahmadi, M., Rouhi, S.: Impact resistance of short carbon fibre-carbon nanotube-polymer matrix hybrid composites: a stochastic multiscale approach. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 235(8), 1925–1936, 14644207211015267. (2021). https://doi.org/10.1177/1464420721101526710.1177/14644207211015267 ↗

56. El Aoud, B., Althobaiti, S., Aljohani, A.F., Selim, M.M., Boujelbene, M., Mohamed, S.M.Y., Mahariq, I.: Micromechanical modeling of thermal conductivities of unidirectional carbon fiber/epoxy composites containing carbon nanotube/ graphene hybrids. Int. Commun. Heat Mass Transfer 157, 107726 (2024). https://doi.org/10.1016/j.icheatmasstransfer.2024.10772610.1016/j.icheatmasstransfer.2024.107726 ↗

57. Rivas-Menchi, A., Herrera-Franco, P.J., Valadez-Gonzalez, A., Arcos-Alomia, A.: Enhancing interfacial shear strength with tailored carbon nanotube orientations: A micromechanical hierarchical model of single fiber fragmentation tests. Mater. Today Commun. 38, Article 108104 (2024). https://doi.org/10.1016/j.mtcomm.2024.10810410.1016/j.mtcomm.2024.108104 ↗

58. Patadia, M., Quinn, A., Tank, M., Jolowsky, C., Luiz, L., Psulkowski, A., Kurilich, M., De Leon, A., Liang, R., Sweat, R.: Enhanced multifunctionality in carbon fiber/carbon nanotube reinforced PEEK hybrid composites: Superior combination of mechanical properties, electrical conductivity, and EMI shielding. Compos. Part. B-Eng. 284, 111674 (2024). https://doi.org/10.1016/j.compositesb.2024.11167410.1016/j.compositesb.2024.111674 ↗

59. Kundalwal, S.I., Ray, M.C.: Effective properties of a novel composite reinforced with short carbon fibers and radially aligned carbon nanotubes. Mech. Mater. 53, 47–60 (2012). https://doi.org/10.1016/j.mechmat.2012.05.00810.1016/j.mechmat.2012.05.008 ↗

60. Zhang, S., Jia, Z., Cheng, B., Zhao, Z., Lu, F., Wu, G.: Recent progress of perovskite oxides and their hybrids for electromagnetic wave absorption: A mini-review. Adv. Compos. Hybrid. Mater. 5(3), 2440–2460 (2022). https://doi.org/10.1007/s42114-022-00458-710.1007/s42114-022-00458-7 ↗

61. Wang, Y.-L., Yang, S.-H., Wang, H.-Y., Wang, G.-S., Sun, X.-B., Yin, P.-G.: Hollow porous coni/c composite nanomaterials derived from MOFs for efficient and lightweight electromagnetic wave absorber. Carbon. 167, 485–494 (2020). https://doi.org/10.1016/j.carbon.2020.06.01410.1016/j.carbon.2020.06.014 ↗

62. Gao, Z., Jia, Z., Wang, K., Liu, X., Bi, L., Wu, G.: Simultaneous enhancement of recoverable energy density and efficiency of lead-free relaxor-ferroelectric BNT-based ceramics. Chem. Eng. J. 402, 125951. (2020). https://doi.org/10.1016/j.cej.2020.12595110.1016/j.cej.2020.125951 ↗

63. Meng, F., Wang, H., Huang, F., Guo, Y., Wang, Z., Hui, D., Zhou, Z.: Graphene-based microwave absorbing composites: A review and prospective. Compos. Part. B-Engineering 137, 260–277 (2018). https://doi.org/10.1016/j.compositesb.2017.11.02310.1016/j.compositesb.2017.11.023 ↗

64. Wu, N., Zhao, B., Chen, X., Hou, C., Huang, M., Alhadhrami, A., Mersal, G.A.M., Ibrahim, M.M., Tian, J.: Dielectric properties and electromagnetic simulation of molybdenum disulfide and ferric oxide-modified Ti3C2TX MXene hetero-structure for potential microwave absorption. Adv. Compos. Hybrid. Mater. 5(2), 1548–1556 (2022). https://doi.org/10.1007/s42114-022-00490-710.1007/s42114-022-00490-7 ↗

65. Chen, X., Liu, H., Hu, D., Liu, H., Ma, W.: Recent advances in carbon nanotubes-based microwave absorbing composites. Ceram. Int. 47(17), 23749–23761 (2021). https://doi.org/10.1016/j.ceramint.2021.05.21910.1016/j.ceramint.2021.05.219 ↗

66. Zhao, R., Xia, J., Adamaquaye, P., Zhao, G.: High density interfaces enhanced microwave absorption in multifunctional carbon nanotubes-glass fiber-epoxy composites. Polym. Adv. Technol. 33(3), 818–830 (2022). https://doi.org/10.1002/pat.555810.1002/pat.5558 ↗

67. Li, K., Zhao, R., Xia, J., Zhao, G.-L.: Reinforcing microwave absorption multiwalled carbon Nanotube-Epoxy composites using glass fibers for multifunctional applications. Adv. Eng. Mater. (2020). https://doi.org/10.1002/adem.20190078010.1002/adem.201900780 ↗

68. Meng, X., Lei, W., Yang, W., Liu, Y., Yu, Y.: Fe3O4nanoparticles coated with ultra-thin carbon layer for polarization-controlled microwave absorption performance. J. Colloid Interface Sci. 600, 382–389 (2021). https://doi.org/10.1016/j.jcis.2021.05.05510.1016/j.jcis.2021.05.055 ↗

69. Mou, P., Wan, G., Wu, L., Liu, D., Wang, G.: Optimizing impedance matching and interfacial characteristics of aromatic polyimide/graphene by molecular layer deposition for heat-conducting microwave absorption. J. Mater. Chem. A. 11(8), 4345–4354 (2023). https://doi.org/10.1039/d2ta09101a10.1039/d2ta09101a ↗

70. Ouyang, J., He, Z., Zhang, Y., Yang, H., Zhao, Q.: Trimetallic feconi@c nanocomposite Hollow spheres derived from Metal-Organic frameworks with superior electromagnetic wave absorption ability. ACS Appl. Mater. Interfaces. 11(42), 39304–39314 (2019). https://doi.org/10.1021/acsami.9b1143010.1021/acsami.9b11430 ↗

71. Wang, X., Pan, F., Xiang, Z., Zeng, Q., Pei, K., Che, R., Lu, W.: Magnetic vortex core-shell Fe3O4@C nanorings with enhanced microwave absorption performance. Carbon. 157, 130–139 (2020). https://doi.org/10.1016/j.carbon.2019.10.03010.1016/j.carbon.2019.10.030 ↗

72. Su, J., Zhao, X., Zhou, W., Wang, C., Zhang, P.: Fe2O3-decoration and multilayer structure design of Ti3C2 MXene materials toward strong and broadband absorption of electromagnetic waves in the X-band region. J. Mater. Science-Materials Electron. 32(21), 25919–25932 (2021). https://doi.org/10.1007/s10854-021-05273-210.1007/s10854-021-05273-2 ↗

73. Di, J., Duan, Y., Pang, H., Ma, X., Liu, J.: Sintering-regulated two-dimensional plate@shell basalt@nio heterostructure for enhanced microwave absorption. Appl. Surf. Sci. 574, 151590 (2022). https://doi.org/10.1016/j.apsusc.2021.15159010.1016/j.apsusc.2021.151590 ↗

74. Luo, X., Li, H., Deng, D., Zheng, L., Wu, Y., Luo, W., Zhang, M., Gong, R.: Preparation and excellent electromagnetic absorption properties of dendritic structured Fe3O4@PANI composites. J. Alloys Compd. 891, 161922 (2022). https://doi.org/10.1016/j.jallcom.2021.16192210.1016/j.jallcom.2021.161922 ↗

75. Si, T., Xie, S., Ji, Z., Wu, Z., Ma, C., Wu, J., Wang, J.: In situ anchoring of Fe3O4/CNTs hybrids on basalt fiber for efficient electromagnetic wave absorption. Nanotechnology 34(40), 405602 (2023). https://doi.org/10.1088/1361-6528/ace36510.1088/1361-6528/ace365 ↗

76. Qing, Y., Wang, X., Zhou, Y., Huang, Z., Luo, F., Zhou, W.: Enhanced microwave absorption of multi-walled carbon nanotubes/epoxy composites incorporated with ceramic particles. Compos. Sci. Technol. 102, 161–168 (2014). https://doi.org/10.1016/j.compscitech.2014.08.00610.1016/j.compscitech.2014.08.006 ↗

77. Lee, S.-E., Kang, J.H., Kim, C.: Fabrication and design of Multi-Layered radar absorbing structures of MWNT-Filled glass/epoxy Plain-Weave composites [research-article]. J. Korean Soc. Aeronaut. Space Sci. 33(11), 24–32 (2005). https://doi.org/10.1016/j.compstruct.2005.11.03610.1016/j.compstruct.2005.11.036 ↗

78. Chambers, B., Tennant, A.: Optimised design of Jaumann radar absorbing materials using a genetic algorithm. IEE Proceedings-Radar, Sonar and Navigation 143(1), 23–30 (1996). https://doi.org/10.1049/ip-rsn:1996031610.1049/ip-rsn:19960316 ↗

79. Lee, S.-E., Lee, W.-J., Oh, K.-S., Kim, C.-G.: Broadband all fiber-reinforced composite radar absorbing structure integrated by inductive frequency selective carbon fiber fabric and carbon-nanotube-loaded glass fabrics. Carbon. 107, 564–572 (2016). https://doi.org/10.1016/j.carbon.2016.06.00510.1016/j.carbon.2016.06.005 ↗

80. Eun, S.-W., Choi, W.-H., Jang, H.-K., Shin, J.-H., Kim, J.-B., Kim, C.-G.: Effect of delamination on the electromagnetic wave absorbing performance of radar absorbing structures. Compos. Sci. Technol 116, 18–25 (2015). https://doi.org/10.1016/j.compscitech.2015.04.00110.1016/j.compscitech.2015.04.001 ↗

81. Yan, H., Hu, D., Dai, Y., Zhang, X., Yuan, H., Li, W., Huang, X., Tan, Y.: Self-assembly of carbon nanomaterials onto carbon fiber to improve the interfacial properties of epoxy composites. J. Mater. Sci. Technol. 161, 44–49 (2023). https://doi.org/10.1016/j.jmst.2023.04.00410.1016/j.jmst.2023.04.004 ↗

82. Zhao, Z., Ma, Z., Ding, Z., Liu, Y., Zhang, M., Jiang, C.: Synergistic effect and heterointerface engineering of cobalt/carbon nanotubes enhancing electromagnetic wave absorbing properties of silicon carbide fibers. Nano Res. 17(9), 8479–8486 (2024). https://doi.org/10.1007/s12274-024-6780-510.1007/s12274-024-6780-5 ↗

83. Yao, Z., Zhang, K., Xia, A., Wang, D., Wang, C., Li, H., Chen, Y.: One-step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber. Polym. Compos. 45(7), 5827–5838 (2024)10.1002/pc.28163 ↗

84. Wen, X., Chen, W., Chen, K., Wang, G., Song, C., Zhang, J.: Study on the electromagnetic wave absorption performance of dual-loss type composite MWCNT/CIP/GF/EP. Funct. Compos. Struct. 6(4), 045004 (2024). https://doi.org/10.1088/2631-6331/ad88e510.1088/2631-6331/ad88e5 ↗

85. Shin, Y.C., Lee, W.I., Kim, H.S.: Mode II interlaminar fracture toughness of carbon nanotubes/epoxy film-interleaved carbon fiber composites. Compos. Struct. 236, 111808 (2020). https://doi.org/10.1016/j.compstruct.2019.11180810.1016/j.compstruct.2019.111808 ↗

86. Tarfaoui, M., Moumen, E., A., Lafdi, K.: Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites. Compos. Part. B-Engineering. 112, 185–195 (2017). https://doi.org/10.1016/j.compositesb.2016.12.05610.1016/j.compositesb.2016.12.056 ↗

87. Song, N., Jackson, M., Montgomery, C., Wu, S., Jain, N., Sweat, R., Souza, F.: Using multiscale modeling to advance industrial and research applications of advanced materials. International Journal for Multiscale Computational Engineering 19(4), 57–75 (2021)10.1615/IntJMultCompEng.2021039707 ↗

88. Souza, F.V., Allen, D.H.: Modeling failure of heterogeneous viscoelastic solids under dynamic/impact loading due to multiple evolving cracks using a two-way coupled multiscale model. Mech. Time-Dependent Mater. 14(2), 125–151 (2010). https://doi.org/10.1007/s11043-009-9099-410.1007/s11043-009-9099-4 ↗

89. Bregman, A., Lee, H.O., Hernandez, P., Reyes, A.N., Oluwalowo, A., Sweat, R., Nicholas, J., Treadwell, L.J.: Thermomechanical performance and multiscale modeling of hexagonal Boron nitride modified out-of-autoclave manufactured silica fiber reinforced phenolic composites. Adv. Compos. Mater. 33(5), 794–814 (2024). https://doi.org/10.1080/09243046.2023.230059010.1080/09243046.2023.2300590 ↗

90. Bakamal, A., Ansari, R., Hassanzadeh-Aghdam, M.K.: Computational analysis of the effects of carbon nanotubes on the bending, buckling, and vibration characteristics of carbon fabric/polymer hybrid nanocomposite plates. J. Brazilian Soc. Mech. Sci. Eng. 43(2), 61. https://doi.org/10.1007/s40430-020-02792-710.1007/s40430-020-02792-7 ↗

91. Malekimoghadam, R., Icardi, U.: Prediction of mechanical properties of carbon nanotube-carbon fiber reinforced hybrid composites using multi-scale finite element modelling. Compos. Part. B-Eng. 177, 107405 (2019). https://doi.org/10.1016/j.compositesb.2019.10740510.1016/j.compositesb.2019.107405 ↗

92. Zhang, M., Yu, Y., Luan, Y., Zhou, H., Peng, X., Gong, L., Zhou, H.: Effects of CNT microstructural characteristics on the interfacial enhancement mechanism of carbon fiber reinforced epoxy composites via molecular dynamics simulations. Thin-Walled Struct. 195, 111413 (2024). https://doi.org/10.1016/j.tws.2023.11141310.1016/j.tws.2023.111413 ↗

93. Zhao, Y., Zhang, S., Xu, Q., Wang, K., Xu, Z., Long, T., Jin, T., Jiang, M., Liu, P.: Synergistic enhancement of mechanical and thermal properties in basalt fiber reinforced composites through nanotube and graphene bridging structure: a multi-scale simulation. Compos. Part. B-Eng. 297, 112289 (2025). https://doi.org/10.1016/j.compositesb.2025.11228910.1016/j.compositesb.2025.112289 ↗

94. Raju, A., Chandrasekaran, K.: Comparison of glass/epoxy and hemp/epoxy honeycomb core with MWCNT filler on its comprehensive performance in buckling, static and dynamic behaviors of sandwich composite plates. Polym. Bull. (2024). https://doi.org/10.1007/s00289-024-05506-410.1007/s00289-024-05506-4 ↗

95. Awode, E.I., Amankwah, S., Mbada, N.I., Omiogbemi, I.M.-B.: Simulating lightning effects on carbon fiber composite shielded with carbon nanotube sheets using numerical methods. Heliyon. 10(8), e29762 (2024). https://doi.org/10.1016/j.heliyon.2024.e2976210.1016/j.heliyon.2024.e29762 ↗

96. Bhowmik, K., Khutia, N., Tarfaoui, M., Jana, M., Das, K., Roy, T., Bandyopadhyay, A., Chowdhury, R., A: Influence of multiwalled carbon nanotube on progressive damage of epoxy/carbon fiber reinforced structural composite. Polym. Compos. 43(11), 7751–7772 (2022). https://doi.org/10.1002/pc.2687710.1002/pc.26877 ↗

97. Kirtania, S., Chakraborty, D.: Multi-scale modeling of carbon nanotube reinforced composites with a fiber break. Mater. Design. 35, 498–504 (2012). https://doi.org/10.1016/j.matdes.2011.09.04110.1016/j.matdes.2011.09.041 ↗

98. Qian, W.-M., Vahid, M.H., Sun, Y.-L., Heidari, A., Barbaz-Isfahani, R., Saber-Samandari, S., Khandan, A., Toghraie, D.: Investigation on the effect of functionalization of single-walled carbon nanotubes on the mechanical properties of epoxy glass composites: Experimental and molecular dynamics simulation. J. Mater. Res. Technology-Jmr&T. 12, 1931–1945 (2021). https://doi.org/10.1016/j.jmrt.2021.03.10410.1016/j.jmrt.2021.03.104 ↗

99. Mao, Z., Li, T., Zhang, K., Li, D., Zhou, C., Ren, M., Gu, Y., Wang, B.: Carbon nanotube reinforced Poly-p-Phenylene terephthalamide fibers for toughness improvement: A molecular dynamics study. Adv. Theory Simulations. 3(10), 2000135 (2020). https://doi.org/10.1002/adts.20200013510.1002/adts.202000135 ↗

100. Jiang, Q., Tallury, S.S., Qiu, Y., Pasquinelli, M.A.: Molecular dynamics simulations of the effect of the volume fraction on unidirectional polyimide-carbon nanotube nanocomposites. Carbon. 67, 440–448 (2014). https://doi.org/10.1016/j.carbon.2013.10.01610.1016/j.carbon.2013.10.016 ↗