Mechanical Properties of Auxetic Honeycombs Realized via Material Extrusion Additive Manufacturing: Experimental Testing and Numerical Studies
Source abstract
Abstract
Abstract Combination of experimental testing and numerical analysis is suggested to determine static mechanical properties of the auxetic honeycombs realized via material extrusion. Special specimens, which consist of two honeycombs plates and three steel plates, are used to analyze experimentally shear mechanical properties of honeycombs. Shear testing is simulated using the finite elements software ANSYS. The tests on tension of honeycombs are carried out. These tests are simulated by finite elements software. Plasticity of the honeycomb material and geometrically nonlinear deformations of the honeycomb walls are accounted in honeycomb model. The experimental data and calculations results are close.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Xu, M., Liu, D., Wang, P., Zhang, Z., Jia, H., Lei, H., Fang, D.: In-plane compression behavior of hybrid honeycomb metastructures: Theoretical and experimental studies. Aerosp. Sci. Technol. 106, 106081 (2020). https://doi.org/10.1016/j.ast.2020.10608110.1016/j.ast.2020.106081 ↗
2. Chen, Y., Li, T., Jia, Z., Scarpa, F., Yao, C., Wang, L.: 3D printed hierarchical honeycombs with shape integrity under large compressive deformations. Mater. Des. 137, 226–234 (2018). https://doi.org/10.1016/j.matdes.2017.10.02810.1016/j.matdes.2017.10.028 ↗
3. Parsons, E.M.: Lightweight cellular metal composites with zero and tunable thermal expansion enabled by ultrasonic additive manufacturing: Modeling, manufacturing, and testing. Compos. Struct. 223, 110656 (2019). https://doi.org/10.1016/j.compstruct.2019.02.03110.1016/j.compstruct.2019.02.031 ↗
4. Derevianko, I., Uspensky, B., Avramov, K., Salenko, A., Maksymenko-Sheiko, K.: Experimental and numerical analysis of mechanical characteristics of fused deposition processed honeycomb fabricated from PLA or ULTEM 9085. J. Sandw. Struct. Mater. 25, 264–283 (2023). https://doi.org/10.1177/1099636222113729210.1177/10996362221137292 ↗
5. Uspensky, B., Derevianko, I., Avramov, K., Polishchuk, O., Salenko, A.: Experimental and numerical study on fatigue of sandwich plates with honeycomb core manufactured by fused deposition modeling. Appl. Compos. Mater. 29, 2033–2061 (2022). https://doi.org/10.1007/s10443-022-10057-w10.1007/s10443-022-10057-w ↗
6. Avramov, K., Uspensky, B.: Nonlinear supersonic flutter of sandwich truncated conical shell with flexible honeycomb core manufactured by fused deposition modeling. Int. J. Non-Lin Mech. 143, 104039 (2022). https://doi.org/10.1016/j.ijnonlinmec.2022.10403910.1016/j.ijnonlinmec.2022.104039 ↗
7. Avramov, K., Uspensky, B.: Nonlinear forced vibrations of doubly curved sandwich shells with fused deposition processed flexible honeycomb core. Acta Mech. 234, 1183–1210 (2023). https://doi.org/10.1007/s00707-022-03426-w10.1007/s00707-022-03426-w ↗
8. Matthews, N.: Additive metal technologies for aerospace sustainment. Aircr. Sustainment Repair. 845–862 (2018). https://doi.org/10.1016/B978-0-08-100540-8.00015-710.1016/B978-0-08-100540-8.00015-7 ↗
9. Boparai, K.S., Singh, R.: Advances in fused deposition modeling. Ref. Module Mater. Sci. Mater. Eng. (2017). https://doi.org/10.1016/B978-0-12-803581-8.04166-710.1016/B978-0-12-803581-8.04166-7 ↗
10. Zhang, S., Ma, Y., Deng, Z.: Analytical solution and experimental verification for the buckling failure of additively manufactured octagonal honeycombs. Compos. Struct. 303, 116306 (2023). https://doi.org/10.1016/j.compstruct.2022.11630610.1016/j.compstruct.2022.116306 ↗
11. Mazaev, A.V., Shitikova, M.V., Soloviev, I.A.: The stressed state of three-layer composites with tetrachiral honeycombs under bending conditions: Mathematical modeling and additive manufacturing laboratory experiments. Compos. Struct. 305, 116550 (2023). https://doi.org/10.1016/j.compstruct.2022.11655010.1016/j.compstruct.2022.116550 ↗
12. Xu, Y., Qiu, L., Yuan, S., Wang, Y.: Research on shape memory alloy honeycomb structures fabricated by selective laser melting additive manufacturing. Opt. Laser Technol. 152, 108160 (2022). https://doi.org/10.1016/j.optlastec.2022.10816010.1016/j.optlastec.2022.108160 ↗
13. Obadimu, S.O., Kourousis, K.I.: Load-rate effects on the in-plane compressive behaviour of additively manufactured steel 316L honeycomb structures. Eng. Struct. 273, 115063 (2022). https://doi.org/10.1016/j.engstruct.2022.11506310.1016/j.engstruct.2022.115063 ↗
14. Wang, S., Liu, H.-T.: Energy absorption performance of the auxetic arc-curved honeycomb with thickness and arc angle gradient based on additive manufacturing. Mater. Today Commun. 35, 105515 (2023). https://doi.org/10.1016/j.mtcomm.2023.10551510.1016/j.mtcomm.2023.105515 ↗
15. Andrew, J., Schneider, J., Schiffer, A., Hafeez, F., Kumar, S.: Dynamic crushing of tailored honeycombs realized via additive manufacturing. Int. J. Mech. Sci. 219, 107126 (2022). https://doi.org/10.1016/j.ijmecsci.2022.10712610.1016/j.ijmecsci.2022.107126 ↗
16. Wang, S., Zhang, M., Wang, Y., Huang, Z., Fang, Y.: Experimental studies on quasi-static axial crushing of additively-manufactured PLA random honeycomb-filled double circular tubes. Compos. Struct. 261, 113553 (2021). https://doi.org/10.1016/j.compstruct.2021.11355310.1016/j.compstruct.2021.113553 ↗
17. Wu, Y., Sun, L., Yang, P., Fang, J., Li, W.: Energy absorption of additively manufactured functionally bi-graded thickness honeycombs subjected to axial loads. Thin-Walled Struct. 164, 107810 (2021). https://doi.org/10.1016/j.tws.2021.10781010.1016/j.tws.2021.107810 ↗
18. Liu, H.-T., An, M.-R.: In-plane crushing behaviors of a new-shaped auxetic honeycomb with thickness gradient based on additive manufacturing. Mater. Lett. 318, 132208 (2022). https://doi.org/10.1016/j.matlet.2022.13220810.1016/j.matlet.2022.132208 ↗
19. Forés-Garriga, A., Gómez-Gras, G., Pérez, M.A.: Lightweight hybrid composite sandwich structures with additively manufactured cellular cores. Thin-Walled Struct. 191, 111082 (2023). https://doi.org/10.1016/j.tws.2023.11108210.1016/j.tws.2023.111082 ↗
20. Poojitha, G., Talari, P., Banoth, S., Kumar, A.: Effects of combined infill angle with honeycomb pattern on the mechanical properties of HIPS and polypropylene in FDM process, Mater. Today: Proceedings, in press. (2023)10.1016/j.matpr.2023.09.219 ↗
21. Zhou, G., Yu, T., Cheng, Y., Hu, F., Jiang, T., Ni, R., Cao, F., Sun, T., Zhou, Y., Shen, Y.: Optimization of printing parameters and out-of-plane compression performance of 316L stainless steel ribbed honeycomb. CIRP J. Manuf. Sci. Technol. 43, 71–87 (2023). https://doi.org/10.1016/j.cirpj.2023.02.00410.1016/j.cirpj.2023.02.004 ↗
22. Yıldız, B.K., Yıldız, A.S., Kul, M., Tür, Y.K., Işık, E., Duran, C., Yılmaz, H.: Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries. Ceram. Int. 50, 2901–2908 (2024). https://doi.org/10.1016/j.ceramint.2023.11.02810.1016/j.ceramint.2023.11.028 ↗
23. Luo, G., Chai, C., Chen, Y., Li, L., Xue, P.: Investigations on the quasi-static/dynamic mechanical properties of 3D printed random honeycombs under in-plane compression. Thin-Walled Struct. 190, 110931 (2023). https://doi.org/10.1016/j.tws.2023.11093110.1016/j.tws.2023.110931 ↗
24. Yang, L., Harrysson, O., West, H., Cormier, D.: Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing. Int. J. Solids Struct. 69–70, 475–490 (2015). https://doi.org/10.1016/j.ijsolstr.2015.05.00510.1016/j.ijsolstr.2015.05.005 ↗
25. Zhang, Y., Liu, T., Ren, H., Maskery, I., Ashcroft, I.: Dynamic compressive response of additively manufactured AlSi10Mg alloy hierarchical honeycomb structures. Compos. Struct. 195, 45–59 (2018). https://doi.org/10.1016/j.compstruct.2018.04.02110.1016/j.compstruct.2018.04.021 ↗
26. Afkhami, S., Amraei, M., Gardner, L., Piili, H., Wadee, M.A., Salminen, A., Björk, T.: Mechanical performance and design optimisation of metal honeycombs fabricated by laser powder bed fusion. Thin-Walled Struct. 180, 109864 (2022). https://doi.org/10.1016/j.tws.2022.10986410.1016/j.tws.2022.109864 ↗
27. Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., Zadpoor, A.A.: Mechanical properties of additively manufactured octagonal honeycombs. Mater. Sci. Eng. :C. 69, 1307–1317 (2016). https://doi.org/10.1016/j.msec.2016.08.02010.1016/j.msec.2016.08.020 ↗
28. Scarpa, F., Blain, S., Lew, T., Perrott, D., Ruzzene, M., Yates, J.R.: Elastic buckling of hexagonal chiral cell honeycombs. Compos. Part. A: Appl. Sci. Manuf. 38, 280–289 (2007). https://doi.org/10.1016/j.compositesa.2006.04.00710.1016/j.compositesa.2006.04.007 ↗
29. Li, S., Liu, Z., Shim, V.P.W., Guo, Y., Sun, Z., Li, X., Wang, Z.: In-plane compression of 3D-printed self-similar hierarchical honeycombs – static and dynamic analysis. Thin-Walled Struct. 157, 106990 (2020). https://doi.org/10.1016/j.tws.2020.10699010.1016/j.tws.2020.106990 ↗
30. Kurita, H., Lohmuller, P., Laheurte, P., Nakajima, K., Narita, F.: Additive manufacturing and energy-harvesting performance of honeycomb-structured magnetostrictive Fe52–Co48 alloys. Addit. Manuf. 54, 102741 (2022). https://doi.org/10.1016/j.addma.2022.10274110.1016/j.addma.2022.102741 ↗
31. Zhang, L., Song, B., Zhao, A., Liu, R., Yang, L., Shi, Y.: Study on mechanical properties of honeycomb pentamode structures fabricated by laser additive manufacturing: Numerical simulation and experimental verification. Compos. Struct. 226, 111199 (2019). https://doi.org/10.1016/j.compstruct.2019.11119910.1016/j.compstruct.2019.111199 ↗
32. Andrew, J., Ubaid, J., Hafeez, F., Schiffer, A., Kumar, S.: Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring. Int. J. Impact Eng. 134, 103360 (2019). https://doi.org/10.1016/j.ijimpeng.2019.10336010.1016/j.ijimpeng.2019.103360 ↗
33. Wei, Y., Zhang, C., Yuan, Y., Chen, P., Huang, C., Li, J., Yuan, M.: Blast response of additive manufactured Ti–6Al–4V sandwich panels. Int. J. Impact Eng. 176, 104553 (2023). https://doi.org/10.1016/j.ijimpeng.2023.10455310.1016/j.ijimpeng.2023.104553 ↗
34. Aghajani, S., Wu, C., Li, Q., Fang, J.: Additively manufactured composite lattices: A state-of-the-art review on fabrications, architectures, constituent materials, mechanical properties, and future directions. Thin-Walled Struct. 197, 111539 (2024). https://doi.org/10.1016/j.tws.2023.11153910.1016/j.tws.2023.111539 ↗
35. Benfriha, K., Ahmadifar, M., Shirinbayan, M., Tcharkhtchi, A.: Effect of process parameters on thermal and mechanical properties of polymer-based composites using fused filament fabrication. Polym. Compos. 42, 6025–6037 (2021). https://doi.org/10.1002/pc.2628210.1002/pc.26282 ↗
36. Kallel, A., Koutiri, I., Babaeitorkamani, E., Khavandi, A., Tamizifar, M.: Study of bonding formation between the filaments of PLA in FFF process. Int. Polym. Proc. 34, 434–444 (2019). http://hdl.handle.net/10985/1798210.3139/217.3718 ↗
37. Ahn, S.H., Montero, M., Odell, D., Roundy, S., Wright, P.K.: Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyp. J. 8, 248–257 (2002). https://doi.org/10.1108/1355254021044116610.1108/13552540210441166 ↗
38. Domingo-Espin, M., Puigoriol-Forcada, J.M., Garcia-Granada, A.A., Llumа, J., Borros, S., Reyes, G.: Mechanical property characterization and simulation of fused deposition modeling polycarbonate parts. Mater. Des. 83, 670–677 (2015). https://doi.org/10.1016/j.matdes.2015.06.07410.1016/j.matdes.2015.06.074 ↗
39. Bellini, A., Guceri, S.: Mechanical characterization of parts fabricated using fused deposition modeling. Rapid Prototyp. J. 9, 252–264 (2003). https://doi.org/10.1108/1355254031048963110.1108/13552540310489631 ↗
40. Casavola, C., Cazzato, A., Moramarco, V., Pappalettere, C.: Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory. Mater. Des. 90, 453–458 (2016). https://doi.org/10.1016/j.matdes.2015.11.00910.1016/j.matdes.2015.11.009 ↗
41. Chacón, J.M., Caminero, M.A., Garcia-Plaza, E.,Núnez, P.J.: Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater. Des. 124, 143–157 (2017). https://doi.org/10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065 ↗
42. Banjanin, B., Vladić, G., Pál, M., Baloš, S., Dramićanin, M., Rackov, M., Kneţević, I.: Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology. Revista Matéria. 23, e–12250 (2018). https://doi.org/10.1590/S1517-707620180004.058410.1590/S1517-707620180004.0584 ↗
43. Lanzotti, A., Grasso, M., Staiano, G., Martorelli, M.: The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer. Rapid Prototyp. J. 21, 604–617 (2014). https://doi.org/10.1108/RPJ-09-2014-013510.1108/RPJ-09-2014-0135 ↗
44. Hill, R.: A theory of the yielding and plastic flow of anisotropic metals. Proc. Roy Soc. Lond. Ser. Math. Phys. Sci. 193, 281–297 (1948). https://doi.org/10.1098/rspa.1948.004510.1098/rspa.1948.0045 ↗
45. Hill, R.: The Mathematical Theory of Plasticity. Oxford University Press, Oxford (1950). https://doi.org/10.2307/361126610.2307/3611266 ↗
46. Avramov, K., Gendelman, O.: Interaction of elastic system with snap-through vibration absorber. Int. J. Non-Linear Mech. 44, 81–89 (2009). https://doi.org/10.1016/j.ijnonlinmec.2008.09.00410.1016/j.ijnonlinmec.2008.09.004 ↗
47. Avramov, K., Chernobryvko, M., Uspensky, B., Seitkazenova, K., Myrzaliyev, D.: Self-sustained vibrations of functionally graded carbon nanotubes-reinforced composite cylindrical shells in supersonic flow. Nonlinear Dyn. 98, 1853–1876 (2019). https://doi.org/10.1007/s11071-019-05292-z10.1007/s11071-019-05292-z ↗
48. Tursunkululy, T., Zhangabay, N., Avramov, K., Dauitbek, B., Abdimanat, Z.: Strength analysis of prestressed vertical cylindrical steel oil tanks under operational and dynamic loads. Eastern-European J. Enterp. Technol. 2(7–116), 14–21 (2022). https://doi.org/10.15587/1729-4061.2022.25421810.15587/1729-4061.2022.254218 ↗
49. Gibson, L.J., Ashby, M.F.: Cellular Solids: Structure and Properties. Pergamon, London (1988)
50. Gibson, L.J., Ashby, M.F., Schajer, G.S., Robertson, C.I.: The mechanics of two-dimensional cellular materials. Proc. Royal Soc. Lond. A382. (1982). https://doi.org/10.1098/rspa.1982.008710.1098/rspa.1982.0087 ↗
51. Masters, I.G., Evans, K.E.: Models for the elastic deformation of honeycombs. Compos. Struct. 35, 403–422 (1996). https://doi.org/10.1016/S0263-8223(96)00054-210.1016/S0263-8223(96)00054-2 ↗
52. Catapano, A., Montemurro, M.: A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part I: Homogenisation of core properties. Comp. Struct. 118, 664–676 (2014). https://doi.org/10.1016/j.compstruct.2014.07.05710.1016/j.compstruct.2014.07.057 ↗
53. Abali, B.E., Barchiesi, E.: Additive manufacturing introduced substructure and computational determination of metamaterials parameters by means of the asymptotic homogenization. Continuum Mech. Thermodyn. 33, 993–1009 (2021). https://doi.org/10.1007/s00161-020-00941-w10.1007/s00161-020-00941-w ↗
54. Fedele, R., Placidi, L., Fabbrocino, F.: A review of inverse problems for generalized elastic media: Formulations, experiments, synthesis. Continuum Mech. Thermodyn. (2024). https://doi.org/10.1007/s00161-024-01314-310.1007/s00161-024-01314-3 ↗
55. Lee, J., Choi, J.B., Choi, K.: Application of homogenization FEM analysis to regular and re-entrant honeycomb structures. J. Mater. Sci. 31, 4105–4110 (1996). https://doi.org/10.1007/BF0035267510.1007/BF00352675 ↗
56. Amabili, M.: Nonlinear Mechanics of Shells and Plates in Composite, Soft and Biological Materials. Cambridge University Press, Cambridge (2018). https://doi.org/10.1017/978131642289210.1017/9781316422892 ↗