Basalt Fiber-Reinforced Epoxy Laminates: Improvement in Quasi-Static and Fatigue Properties with Modified Matrices and Fiber Surfaces Using Silica Nanoparticles
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Polymer Nanocomposites and Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Warrier, A., Godara, A., Rochez, O., Mezzo, L., Luizi, F., Gorbatikh, L., Lomov, S.V., VanVuure, A.W., Verpoest, I.: The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix. Compos. Part. Appl. Sci. Manuf. 41, 532–538 (2010). https://doi.org/10.1016/j.compositesa.2010.01.00110.1016/j.compositesa.2010.01.001 ↗
2. Durai Prabhakaran, R.T., Gupta, M., Mahajan, P., Ormondroyd, G.A.: Modelling and simulation of natural fibre/epoxy composites – prediction of stress state and deformations. Int. J. Mater. Eng. Innov. 10(2), 099790 (2019). https://doi.org/10.1504/IJMATEI.2019.1002133710.1504/IJMATEI.2019.10021337 ↗
3. Gupta, M., Prabhakaran, R.T.D., Mahajan, P.: Non-linear material characterization and numerical modeling of cross-ply basalt/epoxy laminate under low velocity impact. Polym. Test. 84, 106349 (2020). https://doi.org/10.1016/j.polymertesting.2020.10634910.1016/j.polymertesting.2020.106349 ↗
4. Gupta, M., Singh, H., Khan, A.N., Mahajan, P., Prabhakaran R.T.D., Alagirusamy, R.: An improved orthotropic elasto-plastic damagemodel for plain woven composites. Thin-Wall. Struct. 162, 107598 (2021). https://doi.org/10.1016/j.tws.2021.10759810.1016/j.tws.2021.107598 ↗
5. Rashid, A., Bin, Haque, M., Islam, S.M.M., Uddin Labib, K.M.R.: Nanotechnology-enhanced fiber-reinforced Polymer Composites. Recent. Adv. Processing. Tech. apl. 10(2), e24292 (2024). https://doi.org/10.1016/j.heliyon.2024.e2469210.1016/j.heliyon.2024.e24692 ↗
6. An, Q., Rider, A.N., Thostenson, E.T.: Hierarchical composite structures prepared by electrophoretic deposition of carbon nanotubes onto glass fibers. ACS Appl. Mater. Interfaces. 5, 2022–2032 (2013). https://doi.org/10.1021/am302873410.1021/am3028734 ↗
7. Rider, A.N., An, Q., Brack, N., Thostenson, E.T.: Polymer nanocomposite - fiber model interphases: Influence of processing and interface chemistry on mechanical performance. Chem. Eng. J. 269, 121–134 (2015). https://doi.org/10.1016/j.cej.2015.01.09310.1016/j.cej.2015.01.093 ↗
8. Nurazzi, N.M., Asyraf, M.R.M., Rayung, M., Norrrahim, M.N.F., Shazleen, S.S., Rani, M.S.A., Shafi, A.R., Aisyah, H.A., Radzi, M.H.M., Sabaruddin, F.A., Ilyas, R.A., Zainudin, E.S., Abdan, K.: Thermogravimetric Analysis Properties of Cellulosic Natural fiber Polymer Composites. Review. Infl. chem. treatments. 13(16), 2710 (2021) https://doi.org/10.3390/polym1316271010.3390/polym13162710 ↗
9. Sharma, A., Joshi, S.C.: Enhancement in fatigue performance of FRP composites with various fillers: A review. Compos. Struct. 309, 116724 (2023). https://doi.org/10.1016/j.compstruct.2023.11672410.1016/j.compstruct.2023.116724 ↗
10. Ning, H., Li, J., Hu, N., Yan, C., Liu, Y., Wu, L., Liu, F., Zhang, J.: Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf. Carbon N Y. 91, 224–233 (2015). https://doi.org/10.1016/j.carbon.2015.04.05410.1016/j.carbon.2015.04.054 ↗
11. Kim, D., Mittal, G., Kim, M., Kim, S., Yop Rhee, K.: Surface modification of MMT and its effect on fatigue and fracture behavior of basalt/epoxy based composites in a seawater environment. Appl. Surf. Sci. 473, 55–58 (2019). https://doi.org/10.1016/j.apsusc.2018.12.12710.1016/j.apsusc.2018.12.127 ↗
12. Chen, L., Jin, H., Xu, Z., Shan, M., Tian, X., Yang, C., Wang, Z., Cheng, B.: A design of gradient interphase reinforced by silanized graphene oxide and its effect on carbon fiber/epoxy interface. Mater. Chem. Phys. 145, 186–196 (2014). https://doi.org/10.1016/j.matchemphys.2014.02.00110.1016/j.matchemphys.2014.02.001 ↗
13. Bulut, M.: Mechanical characterization of Basalt/epoxy composite laminates containing graphene nanopellets. Compos. B Eng. 122, 71–78 (2017). https://doi.org/10.1016/j.compositesb.2017.04.01310.1016/j.compositesb.2017.04.013 ↗
14. Vinay, S.S., Sanjay, M.R., Siengchin, S., Venkatesh, C.V.: Effect of Al2O3 nanofillers in basalt/epoxy composites: Mechanical and tribological properties. Polym. Compos. 42, 1727–1740 (2021). https://doi.org/10.1002/pc.2592710.1002/pc.25927 ↗
15. Wang, Q., hua, Zhang, X., rui, Pei, X., qiang: Study on the friction and wear behavior of basalt fabric composites filled with graphite and nano-SiO2. Mater. Des. 31, 1403–1409 (2010). https://doi.org/10.1016/j.matdes.2009.08.04110.1016/j.matdes.2009.08.041 ↗
16. Zheng, Y., Zhuo, J., Zhang, P.: A review on durability of nano-SiO2 and basalt fiber modified recycled aggregate concrete. Constr. Build. Mater. 304, 124659 (2021). https://doi.org/10.1016/j.conbuildmat.2021.12465910.1016/j.conbuildmat.2021.124659 ↗
17. Gunoz, A., Kara, M.: Mechanical behavior of the polyamide 6.6 nanofiber and MWCNT-reinforced hybrid nanocomposites. Polym. Compos. 45, 4693–4708 (2024). https://doi.org/10.1002/pc.2809010.1002/pc.28090 ↗
18. Kara, M., Erdag Nomer, A., Kepir, Y., Gunoz, A., Avci, A.: Low-energy repeated impact response of nanoparticle reinforced carbon fiber epoxy composite pipes. Compos. Struct. 299 (2022). https://doi.org/10.1016/j.compstruct.2022.11610010.1016/j.compstruct.2022.116100 ↗
19. Kara, M., Ak, S., Uyaner, M., Gunoz, A., Kepir, Y.: The Effect of Hydrothermal Aging on the low-velocity impact behavior of Multi-walled Carbon nanotubes Reinforced Carbon Fiber/Epoxy composite pipes. Appl. Compos. Mater. 28, 1567–1587 (2021). https://doi.org/10.1007/s10443-021-09923-w10.1007/s10443-021-09923-w ↗
20. Thomason, J.L.: Glass fibre sizing: A review, Composites Part A. 127, 105619 (2019). https://doi.org/10.1016/j.compositesa.2019.10561910.1016/j.compositesa.2019.105619 ↗
21. Thomason, J.: A review of the analysis and characterisation of polymeric glass fibre sizings. Polym. Test. 85 (2020). https://doi.org/10.1016/j.polymertesting.2020.10642110.1016/j.polymertesting.2020.106421 ↗
22. Kuzmin, K.L., Timoshkin, I.A., Gutnikov, S.I., Zhukovskaya, E.S., Lipatov, Y.V., Lazoryak, B.I.: Effect of silane/nano-silica on the mechanical properties of basalt fiber reinforced epoxy composites. Compos. Interfaces. 24, 13–34 (2017). https://doi.org/10.1080/09276440.2016.118240810.1080/09276440.2016.1182408 ↗
23. Wei, B., Cao, H., Song, S.: Surface modification and characterization of basalt fibers with hybrid sizings. Compos. Part. Appl. Sci. Manuf. 42, 22–29 (2011). https://doi.org/10.1016/j.compositesa.2010.09.01010.1016/j.compositesa.2010.09.010 ↗
24. Agrawal, M., Durai Prabhakaran, R.T.: Effect of hybrid sizings on the surface morphology, mechanical behavior of basalt fibers, and fiber/epoxy composite properties. Polym. Compos. In press (2024). https://doi.org/10.1002/pc.2907510.1002/pc.29075 ↗
25. Hiremath, A., Nayak, S.Y., Heckadka, S.S., Pramod, J.J.: Mechanical behavior of basalt-reinforced epoxy composites modified with biomass-derived seashell powder. Biomass Convers. Biorefin. (2023). https://doi.org/10.1007/s13399-023-04571-510.1007/s13399-023-04571-5 ↗
26. Hiremath, A., Bolar, G., Murthy, B.R.N., Giri, J., Alotaibi, R., Sathish, T., Iyer, T., Jaideep, J.P.: Surface modification of basalt fibers and its effect on the mechanical properties of basalt fiber/epoxy composite laminates. AIP Adv. 14 (2024). https://doi.org/10.1063/5.020966410.1063/5.0209664 ↗
27. Nayak, S., Nayak, R.K., Panigrahi, I.: Effect of nano-fillers on low-velocity impact properties of synthetic and natural fibre reinforced polymer composites- a review. Adv. Mat. Procss. Technol. 8(3), 2963–2986 (2022). https://doi.org/10.1080/2374068X.2021.194529310.1080/2374068X.2021.1945293 ↗
28. Nayak, R.K., Ray, B.C.: Influence of seawater absorption on retention of mechanical properties of nano-TiO2 embedded glass fiber reinforced epoxy polymer matrix composites. Archives Civil Mech. Eng. 18, 1597–1607 (2018). https://doi.org/10.1016/j.acme.2018.07.00210.1016/j.acme.2018.07.002 ↗
29. Wei, B., Song, S., Cao, H.: Strengthening of basalt fibers with nano-SiO2-epoxy composite coating. Mater. Des. 32, 4180–4186 (2011). https://doi.org/10.1016/j.matdes.2011.04.04110.1016/j.matdes.2011.04.041 ↗
30. Petersen, H.: Investigation of sizing-from glass fibre surface to composite interface. Orbit Dtu Dk 66 (2017)
31. Agrawal, M., Gupta, M., Durai Prabhakaran, R.T., Mahajan, P.: A comparative study of static and fatigue performance of glass and basalt fiber reinforced epoxy composites. Polym. Compos. 45, 3551–3565 (2024). https://doi.org/10.1002/pc.2800810.1002/pc.28008 ↗
32. Agrawal, M., Durai Prabhakaran, R.T., Mahajan, P.: Experimental investigations on the fatigue behavior of hybrid basalt/glass fiber epoxy composites. Fatigue Fract. Eng. Mater. Struct. 47, 2650–2667 (2024). https://doi.org/10.1111/ffe.1430310.1111/ffe.14303 ↗
33. Wetzel, B., Haupert, F., Zhang, M.Q.: Epoxy nanocomposites with high mechanical and tribological performance. Compos. Sci. Technol. 63, 2055–2067 (2003). https://doi.org/10.1016/S0266-3538(03)00115-510.1016/S0266-3538(03)00115-5 ↗
34. Cho, J., Joshi, M.S., Sun, C.T.: Effect of inclusion size on mechanical properties of polymeric composites with micro and nano particles. Compos. Sci. Technol. 66, 1941–1952 (2006). https://doi.org/10.1016/j.compscitech.2005.12.02810.1016/j.compscitech.2005.12.028 ↗
35. Mini, K.M., Lakshmanan, M., Mathew, L., Mukundan, M.: Effect of fibre volume fraction on fatigue behaviour of glass fibre reinforced composite. Fatigue Fract. Eng. Mater. Struct. 35, 1160–1166 (2012). https://doi.org/10.1111/j.1460-2695.2012.01709.x10.1111/j.1460-2695.2012.01709.x ↗
36. Alajarmeh, O., Manalo, A., Ferdous, W., Almasabha, G., Tarawneh, A., Awwad, K.E., Safonov, A., Zeng, X., Schubel, P.: Fatigue behavior of unidirectional fiber-reinforced pultruded composites with high volume fiber fraction. Fatigue Fract. Eng. Mater. Struct. 46, 2034–2048 (2023). https://doi.org/10.1111/ffe.1397910.1111/ffe.13979 ↗
37. Coats, T.W., Harris, C.E.: Experimental Verification of a progressive damage model for IM7/5260 Laminates subjected to tension-tension fatigue. J. Compos. Mater. 29, 280–305 (1995). https://doi.org/10.1177/00219983950290030110.1177/002199839502900301 ↗
38. Kawai, M., Koizumi, M.: Nonlinear constant fatigue life diagrams for carbon/epoxy laminates at room temperature. Compos. Part. Appl. Sci. Manuf. 38, 2342–2353 (2007). https://doi.org/10.1016/j.compositesa.2007.01.01610.1016/j.compositesa.2007.01.016 ↗
39. Freire Júnior, R.C.S., Belísio, A.S.: Probabilistic S-N curves using exponential and power laws equations. Compos. B Eng. 56, 582–590 (2014). https://doi.org/10.1016/j.compositesb.2013.08.03610.1016/j.compositesb.2013.08.036 ↗
40. Philippidis, T.P., Vassilopoulos, A.P.: Complex stress state effect on fatigue life of GRP laminates. Part I, experimental. Int. J. Fatigue. 24, 813–823 (2002). https://doi.org/10.1016/S0142-1123(02)00003-810.1016/S0142-1123(02)00003-8 ↗
41. Kwofie, S.: An exponential stress function for predicting fatigue strength and life due to mean stresses. Int. J. Fatigue. 23, 829–836 (2001). https://doi.org/10.1016/S0142-1123(01)00044-510.1016/S0142-1123(01)00044-5 ↗
42. Ferdous, W., Manalo, A., Peauril, J., Salih, C., Raghava Reddy, K., Yu, P., Schubel, P., Heyer, T.: Testing and modelling the fatigue behaviour of GFRP composites – effect of stress level, stress concentration and frequency. Eng. Sci. Technol. Int. J. 23, 1223–1232 (2020). https://doi.org/10.1016/j.jestch.2020.01.00110.1016/j.jestch.2020.01.001 ↗
43. Shah, D.U., Schubel, P.J., Clifford, M.J., Licence, P.: Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams. Compos. Sci. Technol. 74, 139–149 (2013). https://doi.org/10.1016/j.compscitech.2012.10.01510.1016/j.compscitech.2012.10.015 ↗
44. Abd Allah, M.H., Abdiqb, A.I., Selmy, E.M., Khashaba, U.A.: Effect of fibre volume fraction on the fatigue behaviour of grp pultruded rod composites. Compos. Sci. Technol. 56, 23–29. https://doi.org/10.1016/0266-3538(95)00125-510.1016/0266-3538(95)00125-5 ↗
45. Sharma, M., Gao, S., Mäder, E., Sharma, H., Wei, L.Y., Bijwe, J.: Carbon fiber surfaces and composite interphases. Compos. Sci. Technol. 102, 35–50 (2014). https://doi.org/10.1016/j.compscitech.2014.07.00510.1016/j.compscitech.2014.07.005 ↗
46. Ma, Q., Gu, Y., Li, M., Wang, S., Zhang, Z.: Effects of surface treating methods of high-strength carbon fibers on interfacial properties of epoxy resin matrix composite. Appl. Surf. Sci. 379, 199–205 (2016). https://doi.org/10.1016/j.apsusc.2016.04.07510.1016/j.apsusc.2016.04.075 ↗
47. Zhang, R.L., Huang, Y.D., Li, N., Liu, L., Su, D.: Effect of the concentration of the sizing agent on the carbon fibers surface and interface properties of its composites. J. Appl. Polym. Sci. 125, 425–432 (2012). https://doi.org/10.1002/app.3561610.1002/app.35616 ↗
48. Manjunatha, C.M., Taylor, A.C., Kinloch, A.J., Sprenger, S.: The effect of rubber micro-particles and silica nano-particles on the tensile fatigue behaviour of a glass-fibre epoxy composite. J. Mater. Sci. 44, 342–345 (2009). https://doi.org/10.1007/s10853-008-3092-110.1007/s10853-008-3092-1 ↗
49. Ilangovan, S., Kumaran, S.S., Vasudevan, A., Naresh, K.: Effect of silica nanoparticles on mechanical and thermal properties of neat epoxy and filament wounded E-glass/epoxy and basalt/epoxy composite tubes. Mater. Res. Express. 6 (2019). https://doi.org/10.1088/2053-1591/ab260110.1088/2053-1591/ab2601 ↗
50. Karnati, S.R., Agbo, P., Zhang, L.: Applications of silica nanoparticles in glass/carbon fiber-reinforced epoxy nanocomposite, Comp. Comm. 17, 32–41 (2020). https://doi.org/10.1016/j.coco.2019.11.00310.1016/j.coco.2019.11.003 ↗
51. Papageorgiou, D.G., Li, Z., Liu, M., Kinloch, I.A., Young, R.J.: Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites. Nanoscale. 12, 2228 (2020). https://doi.org/10.1039/C9NR06952F10.1039/C9NR06952F ↗
52. Hoseinlaghab, S., Farahani, M., Safarabadi, M.: Improving the impact resistance of the multilayer composites using nanoparticles. Mech. Based Des. Struct. Mach. 51, 3083–3099 (2023). https://doi.org/10.1080/15397734.2021.191742410.1080/15397734.2021.1917424 ↗
53. Krishna Kumar, P.S., Navin Kumar, B.: Improvement of impact strength of novel intra-ply basalt/kevlar composite by addition of silica nanoparticles in comparison with basalt/kevlar composite using resin transfer mould process. Materials Today: Proceedings. 69(3), 843–847 (2022). https://doi.org/10.1016/j.matpr.2022.07.27210.1016/j.matpr.2022.07.272 ↗
54. Hashim, U.R., Jumahat, A., Mahmud, J.: Improved tensile properties of basalt fibre reinforced polymer composites using silica nanoparticles. Materwiss Werksttech. 50, 1149–1155 (2019). https://doi.org/10.1002/mawe.20180007110.1002/mawe.201800071 ↗
55. Su, C., Wang, X., Ding, L., Wu, Z.: Enhancement of mechanical behavior of FRP composites modified by silica nanoparticles. Constr. Build. Mater. 262 (2020). https://doi.org/10.1016/j.conbuildmat.2020.12076910.1016/j.conbuildmat.2020.120769 ↗
56. Kim, T., Kwon, S.H., Kim, H.J., Lim, C.S., Chung, I., Lee, W.K., Seo, B.: Effect of the Surface Modification of Silica Nanoparticles on the Viscosity and Mechanical properties of Silica/Epoxy nanocomposites. Compos. Interfaces. 29, 1573–1590 (2022). https://doi.org/10.1080/09276440.2022.209457210.1080/09276440.2022.2094572 ↗
57. Kamran-Pirzaman, A., Rostamian, Y., Babatabar, S.: Surface improvement effect of silica nanoparticles on epoxy nanocomposites mechanical and physical properties, and curing kinetic. J. Polym. Res. 27 (2020). https://doi.org/10.1007/s10965-019-1918-y10.1007/s10965-019-1918-y ↗
58. Mahrholz, T., Stängle, J., Sinapius, M.: Quantitation of the reinforcement effect of silica nanoparticles in epoxy resins used in liquid composite moulding processes. Compos. Part. Appl. Sci. Manuf. 40, 235–243 (2009). https://doi.org/10.1016/j.compositesa.2008.11.00810.1016/j.compositesa.2008.11.008 ↗
59. Zhang, D., Huang, Y.: Dispersion characterizations and adhesion properties of epoxy composites reinforced by carboxymethyl cellulose surface treated carbon nanotubes. Powder Technol. 404 (2022). https://doi.org/10.1016/j.powtec.2022.11750510.1016/j.powtec.2022.117505 ↗
60. Chia, L., Huang, Y., Xia, W., Lu, P., Zhang, D.: Carbon nanotube (CNT) reinforced cementitious composites using carboxymethyl cellulose (CMC) treatment for enhanced dispersion, mechanical, and piezoresistive properties. Constr. Build. Mater. 377 (2023). https://doi.org/10.1016/j.conbuildmat.2023.13110410.1016/j.conbuildmat.2023.131104 ↗
61. Malhotra, D., Agrawal, M., Durai Prabhakaran, R.T.: Effect of MWCNTs on static, dynamic, and wear performance of Vacuum assisted Resin infusion Molding (VARIM) processed glass fabric/epoxy polymer composites. Nanofabrication. 9 (2024). https://doi.org/10.37819/nanofab.9.182910.37819/nanofab.9.1829 ↗
62. Huang, S., Fu, Q., Yan, L., Kasal, B.: Characterization of interfacial properties between fibre and polymer matrix in composite materials – a critical review. J. Mat. Res. Technol. 13, 1441–1484 (2021). https://doi.org/10.1016/j.jmrt.2021.05.07610.1016/j.jmrt.2021.05.076 ↗
63. Baller, J., Becker, N., Ziehmer, M., Thomassey, M., Zielinski, B., Müller, U., Sanctuary, R.: Interactions between silica nanoparticles and an epoxy resin before and during network formation. Polym. (Guildf). 50, 3211–3219 (2009). https://doi.org/10.1016/j.polymer.2009.05.02010.1016/j.polymer.2009.05.020 ↗
64. Yang, K., Venkataraman, M., Karpiskova, J., Suzuki, Y., Ullah, S., Kim, I.S., Militky, J., Wang, Y., Yang, T., Wiener, J., Zhu, G., Yao, J.: Structural analysis of embedding polyethylene glycol in silica aerogel. Microporous Mesoporous Mater. 310 (2021). https://doi.org/10.1016/j.micromeso.2020.11063610.1016/j.micromeso.2020.110636 ↗