Comparison of Static/Dynamic Loading and Tensile Behavior of Interply and Intraply Hybridized Carbon/Basalt Epoxy Composites
Source abstract
Abstract
Hybridization of inherently brittle carbon fibers with basalt fibers in the fiber reinforced plastics results in improved impact damage resistance and ductility. This study investigates the effects of two hybridization types i.e., interply and intraply and compares the tensile, dynamic, and quasi-static loading behavior of the carbon/basalt hybrid composites. While low velocity impact (LVI) tests were conducted at rebounding, penetrating and perforating impact velocities of 4, 5.6 and 6.6 ms−1, quasi-static indentation was monitored by acoustic emission signals to estimate the types of failures produced during the loading. Various parameters deduced from the experimental data were correlated with the structural configurations. Results showed that the type of hybridization and location of constituent fibers influenced the peak fracture forces, overall laminate ductility and damage degree. While the tensile strength and percent elongation of the intraply hybrid was higher, interply hybrids showed comparatively better damage absorption. Higher tensile strength and lower damage absorption in the intraply hybrids was a result of better interlayer cohesion and types of failure modes in the carbon yarns, respectively. In the interply hybrids, compliant deformation of basalt fibers and delamination of ductile fabric type interfaces improved the damage absorption of the laminate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Wei, B., Cao, H., Song, S.: Tensile behavior contrast of basalt and glass fibers after chemical treatment. Mater. Des. 31, 4244 (2010). https://doi.org/10.1016/j.matdes.2010.04.00910.1016/j.matdes.2010.04.009 ↗
2. Hao, L., Yu W.: Comparison of thermal protective performance of aluminized fabrics of basalt fiber and glass fiber Fire Mater. 35 553 (2010). https://doi.org/10.1002/fam.107310.1002/fam.1073 ↗
3. Ulus, H., Kaybal, H.B., Eskizeybek, V., Avcı, A.: Enhanced Salty Water Durability of Halloysite Nanotube Reinforced Epoxy/Basalt Fiber Hybrid Composites. Fibers and Polymers 20, 2184 (2019). https://doi.org/10.1007/s12221-019-9316-y10.1007/s12221-019-9316-y ↗
4. Bahari-Sambran, F., Eslami-Farsani, R., Arbab Chirani, S.: The flexural and impact behavior of the laminated aluminum-epoxy/basalt fibers composites containing nanoclay: An experimental investigation. J. Sandwich Struct. Mater. 22, 1931 (2018). https://doi.org/10.1177/109963621879269310.1177/1099636218792693 ↗
5. Dorigato, A., Pegoretti, A.: Fatigue resistance of basalt fibers-reinforced laminates. J. Compos. Mater. 46, 1773 (2012). https://doi.org/10.1177/002199831142562010.1177/0021998311425620 ↗
6. Lopresto, V., Leone, C., De Iorio, I.: Mechanical characterisation of basalt fibre reinforced plastic. Compos. B Eng. 42, 717 (2011). https://doi.org/10.1016/j.compositesb.2011.01.03010.1016/j.compositesb.2011.01.030 ↗
7. He, C., Li, Y., Zhang, Z., Sun, Z.: Impact Damage Modes and Residual Flexural Properties of Composites Beam. J. Reinf. Plast. Compos. 27, 1163 (2008). https://doi.org/10.1177/073168440708707710.1177/0731684407087077 ↗
8. De Rosa, I., Marra, F., Pulci, G., Santulli, C., Sarasini, F., Tirillò, J., Valente, MJEPL.: Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates. eXPRESS Polymer Letters 5: 449. (2011)10.3144/expresspolymlett.2011.43 ↗
9. Chen, J., Tuo, W., Wei, P., Okabe, Y., Xu, M., Xu, M.: Characteristics of the shear mechanical properties and the influence mechanism of short basalt fiber reinforced polymer composite materials. J. Sandwich Struct. Mater. 21, 1520 (2017). https://doi.org/10.1177/109963621771646610.1177/1099636217716466 ↗
10. Vogelesang, L.B., Vlot, A.: Development of fibre metal laminates for advanced aerospace structures. J. Mater. Process. Technol. 103, 1 (2000). https://doi.org/10.1016/S0924-0136(00)00411-810.1016/S0924-0136(00)00411-8 ↗
11. Asundi, A., Choi, A.Y.N.: Fiber metal laminates: An advanced material for future aircraft. J. Mater. Process. Technol. 63, 384 (1997). https://doi.org/10.1016/s0924-0136(96)02652-010.1016/s0924-0136(96)02652-0 ↗
12. Banerjee, S., Sankar, B.V.: Mechanical properties of hybrid composites using finite element method based micromechanics. Compos. B Eng. 58, 318 (2014). https://doi.org/10.1016/j.compositesb.2013.10.06510.1016/j.compositesb.2013.10.065 ↗
13. Czigány, T.: Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: Mechanical properties and acoustic emission study. Compos. Sci. Technol. 66, 3210 (2006). https://doi.org/10.1016/j.compscitech.2005.07.00710.1016/j.compscitech.2005.07.007 ↗
14. Petrucci, R., Santulli, C., Puglia, D., Sarasini, F., Torre, L., Kenny, J.M.: Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion. Mater. Des. 49, 728 (2013). https://doi.org/10.1016/j.matdes.2013.02.01410.1016/j.matdes.2013.02.014 ↗
15. Wang, X., Hu, B., Feng, Y., Liang, F., Mo, J., Xiong, J., Qiu, Y.: Low velocity impact properties of 3D woven basalt/aramid hybrid composites. Compos. Sci. Technol. 68, 444 (2008). https://doi.org/10.1016/j.compscitech.2007.06.01610.1016/j.compscitech.2007.06.016 ↗
16. Dehkordi, M.T., Nosraty, H., Shokrieh, M.M., Minak, G., Ghelli, D.: Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics. Mater. Des. 31, 3835 (2010). https://doi.org/10.1016/j.matdes.2010.03.03310.1016/j.matdes.2010.03.033 ↗
17. Azizi Samir, M.A.S., Alloin, F., Dufresne, A.: Review of Recent Research into Cellulosic Whiskers, Their Properties and Their Application in Nanocomposite Field. Biomacromol 6, 612 (2005). https://doi.org/10.1021/bm049368510.1021/bm0493685 ↗
18. Chikhradze, N.M., Marquis, F.D.S., Japaridze, L.A., Abashidze, G.S., Okujava, L.M.: Polymer Based Composite and Hybrid Materials for Wind Power Generation Mater. Sci. Forum 654–656 2612 (2010). https://doi.org/10.4028/www.scientific.net/MSF.654-656.261210.4028/www.scientific.net/MSF.654-656.2612 ↗
19. Swolfs, Y., Gorbatikh, L., Verpoest, I.: Fibre hybridisation in polymer composites: A review. Compos. A Appl. Sci. Manuf. 67, 181 (2014). https://doi.org/10.1016/j.compositesa.2014.08.02710.1016/j.compositesa.2014.08.027 ↗
20. Wan, Y., Yang, B., Jin, P., Zheng, Z., Huang, Y.: Impact and compression-after-impact behavior of sandwich panel comprised of foam core and wire nets/glass fiber reinforced epoxy hybrid facesheets J. Sandwich Struct. Mater. 1099636220912785 (2020). https://doi.org/10.1177/109963622091278510.1177/1099636220912785 ↗
21. Saeedifar, M., Saleh, M.N., El-Dessouky, H.M., Teixeira De Freitas, S., Zarouchas, D.: Damage assessment of NCF, 2D and 3D woven composites under compression after multiple-impact using acoustic emission. Compos. A Appl. Sci. Manuf. 132, 105833 (2020). https://doi.org/10.1016/j.compositesa.2020.10583310.1016/j.compositesa.2020.105833 ↗
22. Rizzo, F.: University of Bath, (2020)
23. Ary Subagia, I.D.G., Kim, Y., Tijing, L.D., Kim, C.S., Shon, H.K.: Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers. Compos. B Eng. 58, 251 (2014). https://doi.org/10.1016/j.compositesb.2013.10.02710.1016/j.compositesb.2013.10.027 ↗
24. Sarasini, F., Tirillò, J., Ferrante, L., et al.: Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites. Compos. B Eng. 59, 204 (2014)10.1016/j.compositesb.2013.12.006 ↗
25. Sun, G., Tong, S., Chen, D., Gong, Z., Li, Q.: Mechanical properties of hybrid composites reinforced by carbon and basalt fibers. Int. J. Mech. Sci. 148, 636 (2018). https://doi.org/10.1016/j.ijmecsci.2018.08.00710.1016/j.ijmecsci.2018.08.007 ↗
26. Zhang, C.H., Zhang, J.B., Qu, M.C., Zhang, J.N.: Toughness Properties of Basalt/Carbon Fiber Hybrid Composites Advanced Materials Research 150–151 732 (2011). https://doi.org/10.4028/www.scientific.net/AMR.150-151.73210.4028/www.scientific.net/AMR.150-151.732 ↗
27. Wu, Z., Wang, X., Iwashita, K., Sasaki, T., Hamaguchi, Y.: Tensile fatigue behaviour of FRP and hybrid FRP sheets. Compos. B Eng. 41, 396 (2010). https://doi.org/10.1016/j.compositesb.2010.02.00110.1016/j.compositesb.2010.02.001 ↗
28. Khosravani, M.R.: Composite Materials Manufacturing Processes Appl. Mech. Mater. 110–116 1361 (2012). https://doi.org/10.4028/www.scientific.net/AMM.110-116.136110.4028/www.scientific.net/AMM.110-116.1361 ↗
29. Pegoretti, A., Fabbri, E., Migliaresi, C., Pilati, F.: Intraply and interply hybrid composites based on E-glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties. Polym. Int. 53, 1290 (2004). https://doi.org/10.1002/pi.151410.1002/pi.1514 ↗
30. Shishevan, F.A., Akbulut, H.: Low-Velocity Impact Behavior of Carbon/Basalt Fiber-Reinforced Intra-ply Hybrid Composites. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 43, 225 (2018). https://doi.org/10.1007/s40997-018-0151-310.1007/s40997-018-0151-3 ↗
31. Yu, H., Longana, M.L., Jalalvand, M., Wisnom, M.R., Potter, K.D.: Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres. Compos. A Appl. Sci. Manuf. 73, 35 (2015). https://doi.org/10.1016/j.compositesa.2015.02.01410.1016/j.compositesa.2015.02.014 ↗
32. Dorigato, A., Pegoretti, A.: Flexural and impact behaviour of carbon/basalt fibers hybrid laminates. J. Compos. Mater. 48, 1121 (2013). https://doi.org/10.1177/002199831348215810.1177/0021998313482158 ↗
33. Tirillò, J., Ferrante, L., Sarasini, F., et al.: High velocity impact behaviour of hybrid basalt-carbon/epoxy composites. Compos. Struct. 168, 305 (2017). https://doi.org/10.1016/j.compstruct.2017.02.03910.1016/j.compstruct.2017.02.039 ↗
34. Chen, D., Luo, Q., Meng, M., Li, Q., Sun, G.: Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres. Compos. B Eng. 176, 107191 (2019). https://doi.org/10.1016/j.compositesb.2019.10719110.1016/j.compositesb.2019.107191 ↗
35. Chen, D., Sun, G., Meng, M., Jin, X., Li, Q.: Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates. Thin-Walled Structures 142, 516 (2019). https://doi.org/10.1016/j.tws.2019.03.05610.1016/j.tws.2019.03.056 ↗
36. Boria, S., Pavlovic, A., Fragassa, C., Santulli, C.: Modeling of Falling Weight Impact Behavior of Hybrid Basalt/Flax Vinylester Composites. Procedia Engineering 167, 223 (2016). https://doi.org/10.1016/j.proeng.2016.11.69110.1016/j.proeng.2016.11.691 ↗
37. Ali, A., Hashem, L., Abu Talib, A.R., Mustapha, F.: Impact Resistance of Armor Composite Made of Kevlar29 and Al2O3 Powder. Materialprufung 54, 169 (2012)
38. Ferreira, J.M., Capela, C., Manaia, J., Costa, J.D.: Mechanical properties of woven mat jute/epoxy composites. Mater. Res. 19, 702 (2016)10.1590/1980-5373-MR-2015-0422 ↗
39. Gunes, R., Arslan, K.: Materials, Development of numerical realistic model for predicting low-velocity impact response of aluminium honeycomb sandwich structures Journal of Sandwich Structures 18 95 (2016)10.1177/1099636215603047 ↗
40. ASTM D3039–76. Standard test method for tensile properties of fiber-resin composites
41. Manders, P.W., Bader, M.: The strength of hybrid glass/carbon fibre composites. J. Mater. Sci. 16, 2246 (1981)10.1007/BF00542387 ↗
42. Azizi, H., Eslami-Farsani, R.: Study of mechanical properties of basalt fibers/epoxy composites containing silane-modified nanozirconia J. Ind. Text. 1528083719887530 (2019). https://doi.org/10.1177/152808371988753010.1177/1528083719887530 ↗
43. Sevkat, E., Liaw, B., Delale, F., Raju, B.B.: Drop-weight impact of plain-woven hybrid glass–graphite/toughened epoxy composites. Compos. A Appl. Sci. Manuf. 40, 1090 (2009)10.1016/j.compositesa.2009.04.028 ↗
44. Fukuda, H.: Micromechanical strength theory of hybrid composites. Adv. Compos. Mater 1, 39 (1991). https://doi.org/10.1163/156855191X0005410.1163/156855191X00054 ↗
45. Sayer, M., Bektaş, N.B., Sayman, O.: An experimental investigation on the impact behavior of hybrid composite plates. Compos. Struct. 92, 1256 (2010). https://doi.org/10.1016/j.compstruct.2009.10.03610.1016/j.compstruct.2009.10.036 ↗
46. Benevolenski, O.I., Karger-Kocsis, J., Mieck, K.P., Reubmann, T.: Instrumented Perforation Impact Response of Polypropylene Composites with Hybrid Reinforcement Flax/Glass and Flax/Cellulose Fibers. J. Thermoplast. Compos. Mater. 13, 481 (2016). https://doi.org/10.1106/7pqw-d06a-myu6-869210.1106/7pqw-d06a-myu6-8692 ↗
47. Bledzki, A., Mamun, A., Faruk, O.: Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites. eXPRESS Polymer Letters 1: 755 (2007)10.3144/expresspolymlett.2007.104 ↗
48. Belingardi, G., Cavatorta, M.P., Salvatore Paolino, D.: Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates. Int. J. Impact Eng 35, 609 (2008). https://doi.org/10.1016/j.ijimpeng.2007.02.00510.1016/j.ijimpeng.2007.02.005 ↗
49. Marom, G., Fischer, S., Tuler, F., Wagner, H.: Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour. J. Mater. Sci. 13, 1419 (1978)10.1007/BF00553194 ↗
50. Park, R., Jang, J.: Impact behavior of aramid fiber/glass fiber hybrid composites: The effect of stacking sequence. Polym. Compos. 22, 80 (2001). https://doi.org/10.1002/pc.1051910.1002/pc.10519 ↗
51. Sarasini, F., Tirillò, J., Valente, M., Ferrante, L., Cioffi, S., Iannace, S., Sorrentino, L.: Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties. Mater. Des. 49, 290 (2013). https://doi.org/10.1016/j.matdes.2013.01.01010.1016/j.matdes.2013.01.010 ↗
52. Fiore, V., Scalici, T., Di Bella, G., Valenza, A.: A review on basalt fibre and its composites. Compos. B Eng. 74, 74 (2015). https://doi.org/10.1016/j.compositesb.2014.12.03410.1016/j.compositesb.2014.12.034 ↗
53. Mallick, P., Broutman, L.: Static and impact properties of laminated hybrid composites. J. Test. Eval. 5, 190 (1977)10.1520/JTE11637J ↗
54. Zhang, J., Chaisombat, K., He, S., Wang, C.H.: Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures. Materials & Design (1980–2015) 36: 75 (2012). https://doi.org/10.1016/j.matdes.2011.11.00610.1016/j.matdes.2011.11.006 ↗
55. Khosravani, M.R., Anders, D., Weinberg, K.: Influence of strain rate on fracture behavior of sandwich composite T-joints. European Journal of Mechanics Solids 78, 103821 (2019). https://doi.org/10.1016/j.euromechsol.2019.10382110.1016/j.euromechsol.2019.103821 ↗
56. Khezri, M., Rasmussen, K.J.R.: An energy-based approach to buckling modal decomposition of thin-walled members with arbitrary cross sections, Part 1: Derivation. Thin-Walled Structures 138, 496 (2019). https://doi.org/10.1016/j.tws.2019.01.04110.1016/j.tws.2019.01.041 ↗
57. Jayababu, A., Arumugam, V., Rajesh, B., Suresh Kumar, C.: Investigation of indentation damage resistance on normal and inclined plane of glass/epoxy composite laminates using acoustic emission monitoring. J. Compos. Mater. 54, 2953 (2020). https://doi.org/10.1177/002199832090686410.1177/0021998320906864 ↗
58. Li, L., Lomov, S.V., Yan, X., Carvelli, V.: Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites. Compos. Struct. 116, 286 (2014). https://doi.org/10.1016/j.compstruct.2014.05.02310.1016/j.compstruct.2014.05.023 ↗
59. Huguet, S., Godin, N., Gaertner, R., Salmon, L., Villard, Y.: Technology, Use of acoustic emission to identify damage modes in glass fibre reinforced polyester Composites Science 62 1433 (2002)10.1016/S0266-3538(02)00087-8 ↗
60. Faudree, M., Baer, E., Hiltner, A., Collister, J.: Characterization of damage and fracture processes in short fiber BMC composites by acoustic emission. J. Compos. Mater. 22, 1170 (1988)10.1177/002199838802201207 ↗