Influence of Braiding Angle on Multiple Impact Damages of 3-D Braided Composite along Longitudinal Direction
Source abstract
Abstract
This paper reports deformation and damage evolutions of three-dimensional (3-D) braided composite with different braiding angles under multiple impact compression along longitudinal direction. Braided composites with braiding angle of 15°, 26° and 37° have been prepared for the compression tests. The impact compression test was conducted on a split Hopkison pressure bar (SHPB) along longitudinal direction. A high-speed camera was used to record damage development. A meso-scale finite element model has been established to simulate damage processes. The results show that the damage of composites occurs mainly in the first three impacts. For the 15° sample, damage of yarns and interface dominates the failure mechanisms at the first impact. For the 26° and 37° samples, the resin fracture and interface de-bonding lead to compressive failure at the first impact. Breakage and dislocation of yarns occurred for 15° sample during the subsequent two impacts, whereas it still keeps good structural integrity for 26° and 37° samples. The angle between adjacent yarns increased for the 26° sample and the yarns just tightened each other for 37° sample. Ductile damage is the primary damage mode for both yarns and resin during the multiple impacts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Natural Fiber Reinforced Composites · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Wang, Y., Gao, X., Zhang, L., Wu, X., Wang, Q., Luo, C., Wu, G.: Synthesis of Ti3C2/Fe3O4/PANI hierarchical architecture composite as an efficient wide-band electromagnetic absorber. Appl. Surf. Sci. 480, 830–838 (2019)10.1016/j.apsusc.2019.03.049 ↗
2. Wang, Y., Zhang, W., Wu, X., Luo, C., Wang, Q., Li, J., Hu, L.: Conducting polymer coated metal-organic framework nanoparticles: facile synthesis and enhanced electromagnetic absorption properties. Synth. Met. 228, 18–24 (2017)10.1016/j.synthmet.2017.04.009 ↗
3. Zhang, H., Wang, B., Feng, A., Zhang, N., Jia, Z., Huang, Z., Liu, X., Wu, G.: Mesoporous carbon hollow microspheres with tunable pore size and shell thickness as efficient electromagnetic wave absorbers. Compos. Part B. 167, 690–699 (2019)10.1016/j.compositesb.2019.03.055 ↗
4. Wang, J., Cai, K., Yin, J., Shen, S.: Thermoelectric properties of the PEDOT/SWCNT composite films prepared by a vapor phase polymerization. Synth. Met. 224, 27–32 (2017)10.1016/j.synthmet.2016.11.031 ↗
5. Li, J., Ma, J., Chen, S., He, J., Huang, Y.: Characterization of calcium alginate/ deacetylated konjac glucomannan blend films prepared by Ca2+ crosslinking and deacetylation. Food Hydrocoll. 82, 363–369 (2018)10.1016/j.foodhyd.2018.04.022 ↗
6. Feng, A., Wu, G., Wang, Y., Pan, C.: Synthesis, preparation and mechanical property of wood Fiber-reinforced poly(vinyl chloride) composites. J. Nanosci. Nanotechnol. 17(6), 3859–3863 (2017)10.1166/jnn.2017.13987 ↗
7. Kim, B.S., Hwang, B.S., Lee, S.K., Jun, E.J.: Development and trend of advanced polymer composites as structural materials in Korea. Adv. Perform. Mater. 5(4), 353–361 (1998)10.1023/A:1008617402247 ↗
8. Ahmad, F., Choi, H.S., Park, M.K.: A review: natural Fiber composites selection in view of mechanical, light weight, and economic properties. Macromol. Mater. Eng. 300(1), 10–24 (2015)10.1002/mame.201400089 ↗
9. Sköck-Hartmann B, Gries T. Automotive applications of non-crimp fabric composites. 2011:461–48010.1533/9780857092533.4.461 ↗
10. McGregor, C., Vaziri, R., Poursartip, A., Xiao, X.: Axial crushing of triaxially braided composite tubes at quasi-static and dynamic rates. Compos. Struct. 157, 197–206 (2016)10.1016/j.compstruct.2016.08.035 ↗
11. Li, Y., Gan, X., Gu, B., Sun, B.: Dynamic responses and damage evolutions of four-step three-dimensional braided composites subjected to high strain rate punch shear loading. J. Compos. Mater. 50(12), 1635–1650 (2015)10.1177/0021998315595114 ↗
12. Sun, B., Hu, H., Gu, B.: Compressive behavior of multi-axial multi-layer warp knitted (MMWK) fabric composite at various strain rates. Compos. Struct. 78(1), 84–90 (2007)10.1016/j.compstruct.2005.08.011 ↗
13. Liu, L., Luo, G., Chen, W., Zhao, Z., Huang, X.: Dynamic behavior and damage mechanism of 3D braided composite fan blade under bird impact. International J Aerospace Engineering. 2018, 1–16 (2018)
14. Zhao, Z., Liu, L., Chen, W., Huang, X.: Dynamic compressive behavior in different loading directions of 3D braided composites with different braiding angle. Latin American J Solids and Structures. 15(9), (2018)10.1590/1679-78255111 ↗
15. Zhang, W., Gu, B., Sun, B.: Transverse impact behaviors of 3D braided composites T-beam at elevated temperatures. J. Compos. Mater. 50(28), 3961–3971 (2016)10.1177/0021998316630394 ↗
16. Sun, B., Zhang, Y., Gu, B.: Low-velocity impact response and finite element analysis of four-step 3-D braided composites. Appl. Compos. Mater. 20(4), 397–413 (2012)10.1007/s10443-012-9279-2 ↗
17. McGregor, C., Vaziri, R., Xiao, X.: Finite element modelling of the progressive crushing of braided composite tubes under axial impact. International J Impact Engineering. 37(6), 662–672 (2010)10.1016/j.ijimpeng.2009.09.005 ↗
18. Zhou, H., Li, C., Zhang, L., Crawford, B., Milani, A.S., Ko, F.K.: Micro-XCT analysis of damage mechanisms in 3D circular braided composite tubes under transverse impact. Compos. Sci. Technol. 155, 91–99 (2018)10.1016/j.compscitech.2017.11.025 ↗
19. Zhang, Y., Wang, P., Guo, C.: Energy absorption behaviors of 3D braided composites under impact loadings with frequency domain analysis. Polym. Compos. 37(5), 1620–1627 (2016)10.1002/pc.23334 ↗
20. Li, Y., Sun, B., Gu, B.: Impact shear damage characterizations of 3D braided composite with X-ray micro-computed tomography and numerical methodologies. Compos. Struct. 176, 43–54 (2017)10.1016/j.compstruct.2017.04.067 ↗
21. Lai, J., Yang, H., Wang, H., Zheng, X., Wang, Q.: Penetration experiments and simulation of three-layer functionally graded cementitious composite subjected to multiple projectile impacts. Constr. Build. Mater. 196, 499–511 (2019)10.1016/j.conbuildmat.2018.11.154 ↗
22. Wu, J., Liu, X., Zhou, H., Li, L., Liu, Z.: Experimental and numerical study on soft-hard-soft (SHS) cement based composite system under multiple impact loads. Mater. Des. 139, 234–257 (2018)10.1016/j.matdes.2017.10.073 ↗
23. Li, Q., Zhao, X., Xu, S., Leung, C.K.Y., Wang, B.: Multiple impact resistance of hybrid Fiber ultrahigh toughness cementitious composites with different degrees of initial damage. J. Mater. Civ. Eng. 31(2), 04018368 (2019)10.1061/(ASCE)MT.1943-5533.0002576 ↗
24. Zhou, H., Hu, D., Gu, B., Sun, B.: Transverse impact performance and finite element analysis of three dimensional braided composite tubes with different braiding layers. Compos. Struct. 168, 345–359 (2017)10.1016/j.compstruct.2017.02.025 ↗
25. Gao, X., Sun, B., Gu, B.: Damage mechanisms of 3-D rectangular braided composite under multiple impact compressions. Aerosp. Sci. Technol. 82-83, 46–60 (2018)10.1016/j.ast.2018.08.031 ↗
26. Mallick PK. Fiber-Reinforced Composites: Materials, Manufacturing, and Design: CRC press; 200710.1201/9781420005981 ↗
27. Wan, F., Liu, R., Wang, Y., Sun, G., Cao, Y., Zhang, C.: Microstructure characterization and compressive performance of 3D needle-punched C/C–SiC composites fabricated by gaseous silicon infiltration. Ceram. Int. 45(6), 6897–6905 (2019)10.1016/j.ceramint.2018.12.186 ↗
28. Luan, K., Liu, J., Sun, B., Zhang, W., Hu, J., Fang, X., Ming, C., Song, E.: High strain rate compressive response of the Cf/SiC composite. Ceram. Int. 45(6), 6812–6818 (2019)10.1016/j.ceramint.2018.12.174 ↗
29. Zhang, F., Wan, Y., Gu, B., Sun, B.: Impact compressive behavior and failure modes of four-step three-dimensional braided composites-based meso-structure model. International J Damage Mechanics. 24(6), 805–827 (2015)10.1177/1056789514554921 ↗
30. Kolsky, H.: An investigation of the mechanical properties of materials at very high rates of loading. Proceedings of the Physical Society Section B. 62(11), 676–700 (1949)10.1088/0370-1301/62/11/302 ↗
31. Gao X, Siddique A, Sun B, Gu B. Effect of braiding angle on dynamic mechanical properties of 3-D braided rectangular composites under multiple impact compressions. J. Compos. Mater. 2018:00219983188129210.1177/0021998318812926 ↗
32. Li, D.S., Li, J.L., Chen, L., Lu, Z.X., Fang, D.N.: Finite element analysis of mechanical properties of 3D four-directional rectangular braided composites part 1: microgeometry and 3D finite element model. Appl. Compos. Mater. 17(4), 373–387 (2010)10.1007/s10443-010-9126-2 ↗
33. Hu, M., Zhang, J., Sun, B., Gu, B.: Finite element modeling of multiple transverse impact damage behaviors of 3-D braided composite beams at microstructure level. Int. J. Mech. Sci. 148, 730–744 (2018)10.1016/j.ijmecsci.2018.09.034 ↗
34. Benzeggagh, M.L., Kenane, M.: Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos. Sci. Technol. 56(4), 439–449 (1996)10.1016/0266-3538(96)00005-X ↗
35. Huang, Z.M.: A unified micromechanical model for the mechanical properties of two constituent composite materials. Part IV: rubber-elastic behavior. J. Thermoplast. Compos. Mater. 13(2), 119–139 (2000)10.1177/089270570001300203 ↗
36. Zhang, M., Sun, B., Gu, B.: Meso-structure ageing mechanism of 3-D braided composite's compressive behaviors under accelerated thermo-oxidative ageing environment. Mech. Mater. 115, 47–63 (2017)10.1016/j.mechmat.2017.09.002 ↗
37. Gideon, R.K., Zhou, H., Li, Y., Sun, B., Gu, B.: Quasi-static compression and compression–compression fatigue characteristics of 3D braided carbon/epoxy tube. J Textile Institute. 107(7), 938–948 (2015)10.1080/00405000.2015.1071964 ↗